Since the principle of active noise control was proposed for the first time in the year 1936, the implementation of these ideas always lagged behind in time due to a lack of sufficiently performant computers. With the introduction of digital computers and their rapid advancement until today, applied resarch projects and commercial products became well-established. However, active noise control applied to complex and large-scale structures is still limited by suitable implementation technologies to this date. The suitability is foremost characterized by raw processing power, but also by the resulting processing delay and energy efficiency. Besides, some research suggests that the noise reduction performance of well-established applications in active noise control can also benefit from additional computational power. It is the goal of this thesis to narrow this technology-based gap for a wide range of active noise control applications by optimizing existing control algorithms down to the hardware level or rather the register-transfer level. The custom hardware architectures are realized using field-programmable gate arrays (FPGAs) and provide generic parameters to adjust the algorithm and the internal processing architecture to favor various applications. In case of the feedback FxLMS architecture, a short processing delay is achieved that is independent of any filter length. The performance of the proposed hardware architectures are validated against established software reference systems on experimental setups using identical configurations.The resources of different FPGA platforms are then fully utilized to indicate the corresponding benefits in terms of noise reduction performance for these experimental setups. For the feedback FxLMS algorithm, the most computational demanding, synthesized configuration uses 11 error sensors, 11 secondary sources and filter orders of 2049 at a sampling rate of 48 kHz. For this configuration, this translates to delay times well below 1 μs. On multiple practical applications, the results show an additional noise reduction performance of up to 12 dB compared to the maximum possible configurations of the software reference.
Hardware Acceleration of Active Noise Control Algorithms
2023
Sonstige
Elektronische Ressource
Englisch
DDC: | 629 |
Lidar simulation using graphics hardware acceleration
IEEE | 2008
|Deformable mirror surface control - Hardware, algorithms
AIAA | 1979
|FEEDFORWARD ALGORITHMS WITH SIMPLIFIED PLANT MODEL FOR ACTIVE NOISE CONTROL
Online Contents | 2002
|ACTIVE NOISE CONTROL DEVICE, ACTIVE NOISE CONTROL METHOD AND ACTIVE NOISE CONTROL PROGRAM
Europäisches Patentamt | 2022
|