This document presents an efficient proportional derivative (PD) position controller for three-phase motor drives. The regulator has been designed in frequency domain, employing the direct–quadrature ( d – q ) synchronous rotating reference frame and the indirect vector control. The presented position regulator is easy to tune and incorporates a feed forward (FF) term to compensate effectively the effect of the load disturbance. This position controller has been validated experimentally by using two industrial three-phase motors: an induction motor (IM) of 7.5 kW and a permanent magnet synchronous motor (PMSM) of 3.83 kW. The inner proportional integral (PI) current loops of both machines have also been designed in the frequency domain. Each machine has connected in its shaft an incremental encoder of 4096 pulses per revolution, to measure the position. Several simulations and experimental tests have been carried out with both motors, in favorable conditions and also with various types of adversities (parametric uncertainties, unknown load disturbance and measurement noise in the position and current loops), getting very good results and suggesting that this controller could be used in the research area and also in the industry. ; This research was partially funded by the Basque Government through the project SMAR3NAK (ELKARTEK KK-2019/00051.
Effective Position Control for a Three-Phase Motor
2020-03-02
doi:10.3390/electronics9020241
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
DDC: | 629 |
Europäisches Patentamt | 2017
Europäisches Patentamt | 2016
|