The purpose of this thesis was to design, construct and control a robotic arm with six degrees of freedom. The arm should be able to do simple tasks such as pick and place with good accuracy and without using external sensors. This thesis investigates the precision and the strength of the constructed robot arm. The arm was constructed using 3D printed parts and commonly available hardware such as threaded rods, bearings, screws and nuts. Each axis uses a combination of pulleys and belts in order to achieve desired torque. A differential transmission was implemented in four of the axes in order to combine the power of the motors and reduce weight in the upper parts of the arm. The robot is driven by six stepper motors that are controlled by a combination of RAMPS 1.4 shield and Arduino Mega 2560 microcontroller. The user can manipulate each axis by sending commands to the Arduino through an USB cable. The commands are generated with the help of a simple user interface written in Python. Experiments have shown that the arm has an average error increase of 0.0289-0.1356 mm for each movement, depending on the chosen speed. The maximum amount ofweight that the arm can hold in the worst case scenario is 0.84 kg. ; Syftet med denna avhandling var att designa, konstruera och kontrollera en robotarm med sex frihetsgrader. Armen ska kunna utföra enkla uppgifter som pick-and-place med god noggrannhet och utan användning av externa sensorer. Denna avhandling underosöker precisionen och styrkan hos den konstruerade robotarmen. Armen konstruerades med 3D-printade delar och läattillgänglig hårdvara som gängstänger, lager, skruvar och muttrar. Varje axel använder en kombination av kuggremskivor och kuggremmar för att uppnå önskat moment. En differentialväxel användes i fyra av axlarna för att kombinera motorernas moment och minska vikten i armens övre delar. Roboten drivs av sex stegmotorer som styrs av en kombinationav RAMPS 1.4-shield och Arduino Mega 2560 mikrokontroller. Användaren kan styra varje axel genom att skicka ...


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Design and control of a 3D printed, 6DoF robot arm


    Beteiligte:

    Erscheinungsdatum :

    2021-01-01


    Medientyp :

    Hochschulschrift


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Klassifikation :

    DDC:    629



    6DOF Metrology-integrated Robot Control

    Kihlman, Henrik / Loser, Raimund | SAE Technical Papers | 2003


    MIMO control for 6DoF relative motion

    Mora, E.J. / Serrano, J.B. / Ankersen, F. | Tema Archiv | 1997


    MIMO Control for 6DoF Relative Motion

    Mora, E. J. / Serrano, J. B. / Ankersen, F. | British Library Online Contents | 1997


    New Control System of HYDRA 6DOF Shaker

    Salles, R. / Thoma, O. / Dupuis, P.E. et al. | British Library Conference Proceedings | 2012