A driving cycle is a representation of how vehicles are driven and is usually represented by a set of data points of vehicle speed versus time. Driving cycles have been used to evaluate vehicles for a long time. A traditional usage of driving cycles have been in certification test procedures where the exhaust gas emissions from the vehicles need to comply with legislation. Driving cycles are now also used in product development for example to size components or to evaluate different technologies. Driving cycles can be just a repetition of measured data, be synthetically designed from engineering standpoints, be a statistically equivalent transformation of either of the two previous, or be obtained as an inverse problem e.g. obtaining driving/operation patterns. New methods that generate driving cycles and extract typical behavior from large amounts of operational data have recently been proposed. Other methods can be used for comparison of driving cycles, or to get realistic operations from measured data. This work addresses evaluation, transformation and extraction of driving cycles and vehicle operations. To be able to test a vehicle in a controlled environment, a chassis dynamometer is an option. When the vehicle is mounted, the chassis dynamometer simulates the road forces that the vehicle would experience if it would be driven on a real road. A moving base simulator is a well-established technique to evaluate driver perception of e.g. the powertrain in a vehicle, and by connecting these two simulators the fidelity can be enhanced in the moving base simulator and at the same time the mounted vehicle in the chassis dynamometer is experiencing more realistic loads. This is due to the driver's perception in the moving base simulator is close to reality. If only a driving cycle is considered in the optimization of a controller there is a risk that the controllers of vehicles are tailored to perform well in that specific driving cycle and not during real-world driving. To avoid the sub-optimization issues, the ...


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Evaluation, Transformation, and Extraction of Driving Cycles and Vehicle Operations


    Beteiligte:
    Nyberg, Peter (Autor:in)

    Erscheinungsdatum :

    2013-01-01


    Anmerkungen:

    Local LIU-TEK-LIC-2013:30


    Medientyp :

    Hochschulschrift


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Klassifikation :

    DDC:    629



    Evaluation, Generation, and Transformation of Driving Cycles

    Nyberg, Peter | BASE | 2015

    Freier Zugriff

    EGR Transient Operations in Highly Dynamic Driving Cycles

    Galindo, Jose / Climent, Hector / Pla, Benjamin et al. | Springer Verlag | 2020


    Development of Refuse Vehicle Driving and Duty Cycles

    Soliman, Ahmed / Rizzoni, Giorgio / Fravert, Jim et al. | SAE Technical Papers | 2005


    Development of refuse vehicle driving and duty cycles

    Dembski,N. / Rizzoni,G. / Soliman,A. et al. | Kraftfahrwesen | 2005