Designing a robot manipulator with fewer actuators than the dimension of its configuration space —to reduce bulk, weight and cost— becomes feasible by introducing mechanical elements that lead to non-holonomic constraints. Unfortunately, the mechanical advantages of these non-holonomic designs are usually darkened by the complexity of their control. This paper deals with motion planning for parallel robots with non-holonomic joints shedding new light on their control strategies. As a case study, the motion planning problem is solved for a 3-˘UPU parallel robot,where ˘U stands for a non-holonomic joint whose instantaneous kinematics are equivalent to that of a universal joint. It is thus shown how the three prismatic actuators can maneuver to reach any six-degree-of-freedompose of the moving platform. The motion planning has been addressed as a control problem in the control system representation of the robot’s kinematics and a motion planning algorithm has been devised based on a Jacobian inversion of the end-point map of the representation. Performance of the algorithm is illustrated with numeric computations. ; Preprint
Motion planning for parallel robots with non-holonomic joints
2012-01-01
Sonstige
Elektronische Ressource
Englisch
DDC: | 629 |
Robust motion planning for non-holonomic robots with planar geometric constraints
BASE | 2022
|Holonomic under-actuation of parallel robots with topological reconfiguration
Online Contents | 2015
|Motion trajectory of space robots with non-holonomic constraints
Online Contents | 1996
|