This report focuses on the steering of a Very Narrow Aisle (VNA) forklift, which undergoes frequent transitions between manual and wire guidance modes. Manual operation is employed outside narrow aisles, while wire guidance mode is utilized within them.VNA forklifts are commonly employed in environments where space optimization and productivity are of utmost importance. The forklift’s steering system operates hydraulically through the movement of two cylinders controlled by a proportional valve, which in turn is controlled by a current input. To implement the steering control, a Speedgoat target machine, a rapid control prototyping platform, is utilized. The control algorithm is developed in Simulink Real-Time and integrated with the forklift’s MCU through the Speedgoat target machine, connected via a CAN bus. The Speedgoat control strategy utilizes the distance from the wire (DFW) and heading angle(HA) to generate a pivot angle request. In contrast, the current control strategy aims to minimize DFW, HA, and the pivot angle using P controllers. For the Speedgoat control strategy, the pivot angle request is compared to the current pivot angle to produce a steering command. A PD controller is applied to the heading angle for rapid stabilization of steering changes, while a PI controller is used to ensure the actual pivot angle follows the desired pivot angle. To minimize the distance from the wire, a P controller with two different settings, depending on proximity to wire locking is employed. The control strategy also incorporates bumpless transfer techniques to ensure smooth transitions between manual and wire guidance modes by gradually adjusting the impact of wire guidance and manual steering. Anti-windup measures are taken to prevent integral wind-up effects, and various PID tuning methods are explored to determine the optimal controller parameters. A simulation model is developed to simulate the manual steering of the forklift. The manual steering implemented in Speedgoat exhibits smoother behavior compared ...


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Modelling and Control of the Steering in an Articulated Forklift using Rapid Control Prototyping


    Beteiligte:

    Erscheinungsdatum :

    2023-01-01


    Medientyp :

    Hochschulschrift


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Klassifikation :

    DDC:    629



    Forklift steering control system, forklift steering control method and forklift

    CHEN YU / WU YANGYANG / XU BIN | Europäisches Patentamt | 2024

    Freier Zugriff

    Forklift steering control system

    LIU BO / QIN LIANG / LIU ZHIYONG et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Forklift steering control device

    Europäisches Patentamt | 2018

    Freier Zugriff

    UNMANNED FORKLIFT STEERING CONTROL METHOD

    IEOKA SHOICHI | Europäisches Patentamt | 2018

    Freier Zugriff

    Forklift steering control device and method

    HUANG GUANGGEN / ZHOU LANFANG | Europäisches Patentamt | 2022

    Freier Zugriff