In this study, a frequency-temperature correction model and an approach to construct the master curve of damaged asphalt concrete based on falling weight deflectometer back-calculated moduli were presented. Falling weight deflectometer (FWD) testing and field coring was conducted in 26 locations in Seoul City in which back-calculated and laboratory measured modulus were compared. A frequency-temperature correction model is developed based on the frequency-temperature superposition principle and was verified by comparing to current temperature correction models. The proposed model has the lowest prediction error of 8.2% in comparing asphalt concrete dynamic modulus, but is limited within the linear range of the dynamic modulus and reduced frequency curve in a logarithmic scale. A new procedure in establishing damaged asphalt concrete (AC) master curves is proposed considering a damage factor which is used in determining damaged δ and α parameters. It is verified using laboratory-measured modulus curves and is validated using FWD data obtained from literature. The validation study showed that the proposed procedures have an average error of 11.5%. Further study is recommended to enhance the proposed procedure to minimize error.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    New Approach to Construct Master Curve of Damaged Asphalt Concrete Based on Falling Weight Deflectometer Back-Calculated Moduli


    Beteiligte:
    Le, Van Phuc (Autor:in) / Lee, Hyun Jong (Autor:in) / Flores, Julius Marvin (Autor:in) / Kim, Won Jae (Autor:in) / Baek, Jongeun (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2016-06-09




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt