To study the physical and mechanical properties of tunnel lining concrete under high-temperature combustion, concrete specimens were developed by consulting the concrete proportioning in Xiangan subsea tunnel lining. After combusting the specimens under high temperatures, two types of cooling methods were used, namely, natural cooling and water spraying. The thermal expansion and deformation characteristics, compressive strength, elastic modulus, and antipermeability of concrete after high temperature were analyzed. Results were as follows: (1) Water spray cooling had a significant effect on the thermal expansion of concrete at high temperatures, and natural cooling greatly influenced the elastic modulus and antipermeability level. (2) If the axial strain was the same, then the transverse strain increased with the increase in temperature when the temperature was below 600°C. However, when the temperature was higher than 600°C, the transverse strain decreased with the increase in temperature. (3) With the increase in temperature, a linear relationship existed between the compressive strength of concrete and the temperature under natural cooling condition. However, under the water spray cooling condition, a nonlinear relationship was observed.
High-Temperature Performance of Lining Concrete for Subsea Tunnel
01.09.2018
72018-01-01 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Lining tunnel with precast concrete blocks
Engineering Index Backfile | 1936
|Concrete tunnel lining by steam jet
Engineering Index Backfile | 1919
High-speed precision subway tunnel concrete lining crack detection equipment
Europäisches Patentamt | 2020
|Tunnel inner lining of bright self-compacting concrete
Tema Archiv | 2011
|Mechanisms causing the deterioration of concrete tunnel lining
IuD Bahn | 2007
|