Vapor anode, multi-tube AMTEC converters, currently under development for possible use in future space power systems, utilize sodium working fluid. An avenue to improve the conversion efficiency, not seriously considered to date, is using potassium working fluid. This paper compares the performance and operation limits of Mo-41% Re, sodium and potassium AMTEC cells of an identical design. Unlike the sodium cell, the operation of the potassium cell is restrained by incipient dryout in the evaporator wick. Such incipient dryout could be delayed, but not fully avoided, by moving the evaporator wick surface further away from the cell’s hot plate. The potassium cell with a remote evaporator delivers a peak electrical power (Pe) of 8.5 We at a load voltage V L =2.7  V and efficiency of 17.4%, when the hot side temperature, T hot =1174  K . The cell peak efficiency of 17.7% occurs at V L =3.0  V , but lower Pe(7.5  We ) and T hot (1136  K ). When operated at a 50 K lower hot side temperature, the potassium cell delivers the same electrical power and voltage output as the sodium cell. For the same load voltage and hot side temperature, however, the potassium cell provides 1.2 We more power at a 2 percentage points higher efficiency than the sodium cell. Conversely, the optimized condenser temperature of the potassium cell (560 K) is 90 K lower than that of the sodium cell (650 K), which may increase the surface area of the heat rejection radiator by as much as 85%. Therefore, the choice of a potassium cell should be based on weighing the advantage of attaining higher performance and/or operating at lower T hot versus increasing the surface area of the heat rejection radiator.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Analysis of a vapor anode, multi-tube, potassium refractory AMTEC converter for space applications


    Beteiligte:
    El-Genk, Mohamed (Autor:in) / Tournier, Jean-Michel (Autor:in) / El-Genk, Mohamed S. (Herausgeber:in) / Bragg, Mary J. (Herausgeber:in)

    Kongress:

    Space Technology and Applications International Forum - 2001 ; 2001 ; Albuquerque, New Mexico


    Erschienen in:

    AIP Conference Proceedings ; 552 , 1 ; 1066-1075


    Erscheinungsdatum :

    02.02.2001


    Format / Umfang :

    10 pages





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Analysis of a Vapor Anode, Multi-Tube, Potassium Refractory AMTEC Converter for Space Applications

    El-Genk, M. S. / Tournier, J.-M. / Institute for Space and Nuclear Power Studies | British Library Conference Proceedings | 2001


    A Review of Refractory Materials for Vapor-Anode AMTEC Cells

    King, J. C. / El-Genk, M. S. / University of New Mexico | British Library Conference Proceedings | 2000


    A review of refractory materials for vapor-anode AMTEC cells

    King, Jeffrey C. / El-Genk, M. S. | American Institute of Physics | 2000


    Analyses of Nb-1Zr/C-103, vapor anode, multi-tube AMTEC cells

    King, Jeffrey C. / El-Genk, Mohamed S. | American Institute of Physics | 2000


    Analyses of Nb-1Zr/C-103, Vapor Anode, Multi-Tube AMTEC Cells

    King, J. C. / El-Genk, M. S. / University of New Mexico | British Library Conference Proceedings | 2000