A development program was completed to demonstrate key technologies required for the JIMO Heat Pipe Radiator. Part of this work included the design, assembly, and performance testing of two favorable wick designs in full length water heat pipes. A parametric study identified CP‐2 titanium and Monel K‐500 alloys as favorable envelope materials. The design effort also identified two promising wick designs Based on porous‐walled axially grooves. Several heat pipes of each design were assembled and tested. The heat pipes were tested at temperatures up to 300 °C under several tilt conditions. A sintered groove evaporator design operated at up to 1500 W against gravity at temperatures between 280 °C and 300 °C, and an inverted meniscus evaporator designs operated at up to 1200 W at similar temperature and tilt conditions. Based on the test results, the sintered groove wick design is recommended for further development. One of the heat pipes was also subjected to a startup from an initially frozen condition. A neon inert gas charge of 16 cc was added to the devices to promote successful frozen startup. A favorable response observed from this test provides confidence that the design will survive and operate under a frozen startup condition.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design, Fabrication, and Testing of High Capacity High‐Temperature Monel/Water Heat Pipes


    Beteiligte:
    Rosenfeld, John H. (Autor:in) / Drolen, Bruce L. (Autor:in) / Lu, Cheng‐Yi (Autor:in) / El-Genk, Mohamed S. (Herausgeber:in)

    Kongress:

    SPACE TECH.& APPLIC.INT.FORUM-STAIF 2006: 10th Conf Thermophys Applic Microgravity; 23rd Symp Space Nucl Pwr & Propulsion; 4th Conf Human/Robotic Tech & Nat'l Vision for Space Explor.; 4th Symp Space Coloniz.; 3rd Symp on New Frontiers & Future Concepts ; 2006 ; Albuquerque, New Mexico (USA)


    Erschienen in:

    AIP Conference Proceedings ; 813 , 1 ; 117-125


    Erscheinungsdatum :

    20.01.2006


    Format / Umfang :

    9 pages





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Design, Fabrication, and Testing of High Capacity High-Temperature Monel/Water Heat Pipes

    Rosenfeld, J. H. / Drolen, B. L. / Lu, C.-Y. et al. | British Library Conference Proceedings | 2006


    High Temperature Titanium/Water and Monel/Water Heat Pipes

    Anderson, William / Dussinger, Peter / Bonner, Richard et al. | AIAA | 2006


    Monel metal for high temperature work

    Engineering Index Backfile | 1923


    High Capacity Grooved Heat Pipes

    Mullender, Bernard / Dubois, Marc / Van Oost, Stephane et al. | SAE Technical Papers | 1993


    High Temperature Water Heat Pipes for Kilopower System

    Beard, Derek / Anderson, William G. / Tarau, Calin et al. | AIAA | 2017