Coated particle fuel has been proposed recently for use in Radioisotope Power Systems (RPSs) and Radioisotope Heater Units (RHUs) for a variety of space missions requiring power levels from mWs to 10’s or even hundreds of Watts. It can be made into different shapes and sizes of solid compacts, heating tapes, or paints. Using a conservative design approach, this fuel form could increase by 2.3–2.4 times the thermal power output of a LWRHU, while offering promise of enhanced safety. These performance figures are based on using single-size (500 μm) compacts of ZrC coated 238 PuO 2 kernels and assuming 10% and 5% He release, respectively, at 1723 K, following 10 years of storage. Using binary-size (300 and 1200 μm) fuel kernels in the compact increases the thermal power output by an additional 15%. 238 PuO 2 fuel kernels are intentionally sized (⩾300 μm in diameter) to prevent any adverse radiological effects. They are non-respirable and non-inhalable and, if ingested, would simply be excreted with no radiological effects. The 238 PuO 2 fuel kernels are contained within a strong ZrC coating, which is designed to fully retain the fuel and the helium gas. Helium retention in large grain (⩾300 μm) granular and polycrystalline fuel kernels is possible even at high temperatures (>1700 K). The former could be fabricated using binderless agglomeration or similar processes, while the latter could be fabricated using Sol-Gel or thermal plasma processes, with potentially less radioactive waste and fabrication contamination. In addition to summarizing the results of a recent effort investigating the performance of coated fuel particle compact (CPFC) and helium gas release, this paper identifies and discusses future research and testing needs.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Coated particle fuel for radioisotope power systems and heater units: status and future research needs


    Beteiligte:
    El-Genk, Mohamed S. (Autor:in) / Tournier, Jean-Michel (Autor:in) / Sholtis, Joseph A. (Autor:in) / Lipinski, Ronald J. (Autor:in) / Bragg, Mary J. (Herausgeber:in) / El-Genk, Mohamed S. (Herausgeber:in)

    Kongress:

    SPACE TECHNOLOGY AND APPLICATIONS INTERNATIONAL FORUM - 2000 ; 2000 ; Albuquerque, New Mexico (USA)


    Erschienen in:

    AIP Conference Proceedings ; 504 , 1 ; 1466-1475


    Erscheinungsdatum :

    19.01.2000


    Format / Umfang :

    10 pages





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Coated Particle Fuel for Radioisotope Power Systems and Heater Units: Status and Future Research Needs

    El-Genk, M. S. / Tournier, J.-M. / Sholtis, J. A. et al. | British Library Conference Proceedings | 2000


    Coated Particle Fuel for Radioisotope Power Systems (RPSs) and Radioisotope Heater Units (RHUs)

    Sholtis, J. A. / Lipinski, R. J. / El-Genk, M. S. et al. | British Library Conference Proceedings | 1999


    Coated particle fuel for radioisotope power systems (RPSs) and radioisotope heater units (RHUs)

    Sholtis, Joseph A. / Lipinski, Ronald J. / El-Genk, Mohamed S. | American Institute of Physics | 1999


    A Roadmap for the Development and Validation of Coated Particle Fuel for Future Space Radioisotope Heater Units (RHUs) and Radioisotope Power Systems (RPSs)

    Sholtis, J. A. / Institute for Space and Nuclear Power Studies | British Library Conference Proceedings | 2001