Future reusable launch vehicles may be lifting bodies with non-circular cross section like the proposed Lockheed-Martin VentureStar™. Current designs for the cryogenic tanks of these vehicles are dual-lobed and quad-lobed tanks which are packaged more efficiently than circular tanks, but still have low packaging efficiencies with large gaps existing between the vehicle outer mold line and the outer surfaces of the tanks. In this study, tanks that conform to the outer mold line of a non-circular vehicle were investigated. Four structural concepts for conformal cryogenic tanks and a quad-lobed tank concept were optimized for minimum weight designs. The conformal tank concepts included a sandwich tank stiffened with axial tension webs, a sandwich tank stiffened with transverse tension webs, a sandwich tank stiffened with rings and tension ties, and a sandwich tank stiffened with orthogrid stiffeners and tension ties. For each concept, geometric parameters (such as ring frame spacing, the number and spacing of tension ties or webs, and tank corner radius) and internal pressure loads were varied and the structure was optimized using a finite-element-based optimization procedure. Theoretical volumetric weights were calculated by dividing the weight of the barrel section of the tank concept and its associated frames, webs and tension ties by the volume it circumscribes. This paper describes the four conformal tank concepts and the design assumptions utilized in their optimization. The conformal tank optimization results included theoretical weights, trends and comparisons between the concepts, are also presented, along with results from the optimization of a quad-lobed tank. Also, the effects of minimum gauge values and non-optimum weights on the weight of the optimized structure are described in this paper.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Conformal cryogenic tank trade study for reusable launch vehicles


    Beteiligte:
    Rivers, H. Kevin (Autor:in) / Bragg, Mary J. (Herausgeber:in) / El-Genk, Mohamed S. (Herausgeber:in)

    Kongress:

    Space technology and applications international forum -1999 ; 1999 ; Albuquerque, New Mexico (USA)


    Erschienen in:

    AIP Conference Proceedings ; 458 , 1 ; 1075-1086


    Erscheinungsdatum :

    22.01.1999


    Format / Umfang :

    12 pages





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Conformal Cryogenic Tank Trade Study for Reusable Launch Vehicles

    Rivers, H. K. / University of New Mexico; School of Engineering; Institute for Space and Nuclear Power Studies | British Library Conference Proceedings | 1999



    A CMC-Based Thermal Protection System for Cryogenic Tank Reusable Launch Vehicles

    Hald, H. et al. | British Library Conference Proceedings | 1998


    Reusable Launch Vehicle Tank/Intertank Sizing Trade Study

    J. T. Dorsey / D. E. Myers / C. J. Martin | NTIS | 2000