Two methods that explicitly model airfoil geometry surface deviations for mistuning prediction in integrally bladed rotors are developed by performing a modal analysis on different degrees of freedom of a parent reduced-order model. The parent reduced-order model is formulated with Craig–Bampton component-mode synthesis in cyclic symmetry coordinates for an integrally bladed rotor with a tuned disk and airfoil geometric deviations. The first method performs an eigenanalysis on the constraint-mode degrees of freedom that provides a truncated set of interface modes, whereas the second method includes the disk fixed-interface normal mode in the eigenanalysis to yield a truncated set of ancillary modes. Both methods can use tuned or mistuned modes, where the tuned modes have the computational benefit of being computed in cyclic symmetry coordinates. Furthermore, the tuned modes only need to be calculated once, which offers significant computational savings for subsequent mistuning studies. Each geometric mistuning method relies upon the use of geometrically mistuned airfoil modes in the component-mode framework to provide a very accurate reduced-order model. Free and forced response results are compared to both the full finite-element model solutions and a traditional frequency-based approach used widely in academia and the gas-turbine industry. It is shown that the developed methods provide highly accurate results with a significant reduction in solution time compared to the full finite-element model and parent reduced-order model.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Component-Mode Reduced-Order Models for Geometric Mistuning of Integrally Bladed Rotors


    Beteiligte:

    Erschienen in:

    AIAA Journal ; 52 , 7 ; 1345-1356


    Erscheinungsdatum :

    01.07.2014




    Medientyp :

    Aufsatz (Konferenz) , Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Component Mode Reduced Order Models for Geometric Mistuning of Integrally Bladed Rotors

    Beck, J. / Brown, J.M. / Slater, J.C. et al. | British Library Conference Proceedings | 2013


    Component Mode Reduced Order Models for Geometric Mistuning of Integrally Bladed Rotors

    Beck, Joseph / Brown, Jeffrey M. / Slater, Joseph C. et al. | AIAA | 2013




    Validation of Geometric Mistuning Reduced-Order Models for Single and Dual Flow-Path Integrally Bladed Rotors

    Beck, Joseph A. / Kaszynski, Alexander / Scott-Emuakpor, Onome E. et al. | AIAA | 2015