Substructuring methods have been widely used in structural dynamics to divide large, complicated finite element models into smaller substructures. For linear systems, many methods have been developed to reduce the subcomponents down to a low-order set of equations using a special set of component modes, and these are then assembled to approximate the dynamics of a large-scale model. In this paper, a substructuring approach is developed for coupling geometrically nonlinear structures, where each subcomponent is drastically reduced to a low-order set of nonlinear equations using a truncated set of fixed-interface and characteristic constraint modes. The method used to extract the coefficients of the nonlinear reduced-order model is nonintrusive, in that it does not require any modification to the commercial finite element code but computes the reduced-order model from the results of several nonlinear static analyses. The nonlinear reduced-order models are then assembled to approximate the nonlinear differential equations of the global assembly. The method is demonstrated on the coupling of two geometrically nonlinear plates with simple supports at all edges. The plates are joined at a continuous interface through the rotational degrees of freedom, and the nonlinear normal modes of the assembled equations are computed to validate the models. The proposed substructuring approach reduces a 12,861-degree-of-freedom model down to only 23 degrees of freedom while still accurately reproducing the nonlinear normal modes.
Modal Substructuring of Geometrically Nonlinear Finite Element Models with Interface Reduction
AIAA Journal ; 55 , 5 ; 1695-1706
01.05.2017
Aufsatz (Konferenz) , Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Modal Substructuring of Geometrically Nonlinear Finite-Element Models
Online Contents | 2016
|British Library Conference Proceedings | 2017
|British Library Conference Proceedings | 2017
|