A series of experiments have been conducted on a bleed hole array spanning the width of the Cambridge University Engineering Department supersonic wind tunnel at Mach numbers of 1.8 and 2.5. The wind tunnel was run with varying levels of suction, and the flow structure over the bleed array was subsequently mapped with a laser Doppler velocimetry system at a resolution of 0.25 hole diameters or better. The same wind-tunnel setup was simulated using the OVERFLOW Navier–Stokes equation solver. The information obtained was used primarily in qualitative comparisons of flow patterns. Overall good agreement was found in the definition of the expansion fan and barrier shock pattern produced by flow entering the normal holes, as well as three-dimensional flow patterns. Both studies agreed well in terms of measured mass flow rates, to within 1% of the boundary-layer mass flow. The presence of the barrier shock standing off the downstream edge of the bleed holes corresponded with a jet of upward flow, which may provide a mechanism for the generation of streamwise vortices.
Experimental and Computational Investigations of a Normal-Hole-Bled Supersonic Boundary Layer
AIAA Journal ; 53 , 12 ; 3726-3736
01.12.2015
Aufsatz (Konferenz) , Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Experimental and Computational Investigations of a Normal-Hole-Bled Supersonic Boundary Layer
Online Contents | 2015
|British Library Conference Proceedings | 2014
|Flow Physics of a Normal-hole Bled Supersonic Turbulent Boundary Layer
British Library Conference Proceedings | 2013
|