Aerated-liquid atomization involves the injection of a small amount of gas into a liquid stream to initiate primary breakup within the injector itself. The sprays that result have good penetration and lateral dispersion characteristics, and are suitable for fueling high-speed air-breathing propulsion systems. In this study, the flow within aerated-liquid injectors featuring both inside-out and outside-in aeration schemes is simulated using an implicit large-eddy simulation method equipped with a sharp phase-interface-capturing technique and a continuum model for surface tension. Results are compared with time-averaged and time-resolved X-ray measurements of liquid-phase density and imaging obtained at the 7-BM beamline at Argonne National Laboratory using beryllium injector models. A good agreement between computational predictions and experimental measurements is generally achieved, with each indicating that the end state of the aeration process for both injector designs is the formation of a core-annular two-phase flow in the nozzle portion of the injectors. The numerical model is less successful in predicting the structure of the separated two-phase flows observed before the expansion of the mixture through the nozzle. One-dimensionalized liquid-phase density, velocity, and momentum flux distributions obtained from the numerical model and the experiment display a close agreement for all injector configurations.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical Simulation of Two-Phase Flow Within Aerated-Liquid Injectors


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    01.11.2019




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Numerical Simulation of Transient Two-Phase Flow within Aerated Liquid Injectors

    Tian, M. / Edwards, J. R. / Lin, K.-C. et al. | British Library Conference Proceedings | 2003



    Numerical Investigation of Nozzle Deformities in Aerated-Liquid Injectors

    Bornhoft, Brett / Edwards, Jack R. / Lin, Kuo-Cheng | AIAA | 2019


    Numerical Simulation of Two-Phase Flow Within an Aerated Liquid Injector

    Cassidy, Daniel / Edwards, Jack / Lin, Kuo-Cheng et al. | AIAA | 2010


    NUMERICAL SIMULATION OF TWO-PHASE FLOW WITHIN AN AERATED LIQUID INJECTOR

    Cassidy, D. / Edwards, J. / Lin, K. et al. | British Library Conference Proceedings | 2010