In this paper, an attempt is made to increase the regression rate of the hybrid fuel (paraffin wax) using a hemispherical bluff body placed near the head end of the motor. The oxidizer used for the present study is gaseous oxygen. The results show that the use of a bluff body increases the regression rate by around two times at the higher G ox ( 15 g / cm 2 s ) and by around three to four times at the lower G ox ( 3 g / cm 2 s ). This increase in regression rate diminishes as the L / D of the motor is increased from 9 to 27, whilst still being higher than the case without bluff body. The bluff body was seen to increase the regression rate even at a port diameter, which was four times the initial port diameter of 15 mm. The O / F was nearly constant ( 0.75 ) for the case with the bluff body, whilst for the case without the bluff body, it increased from 1.5 to 2 during an operation time of 4.5 s. In addition, the port diameter after combustion was nearly uniform from the head end to the nozzle end as compared to the case when no bluff body was used, thus minimizing the sliver losses.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Enhancement of Hybrid Fuel Regression Rate Using a Bluff Body


    Beteiligte:
    Kumar, Rajiv (Autor:in) / Ramakrishna, P. A. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    01.07.2014




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Bluff Body Fuel Mixer

    Cheung, Albert K. / Hoke, James B. / McKinney, Randal G. | NTRS | 2017


    Bluff-Body Flow Simulations Using Hybrid RANS/LES

    Roy, Christopher / Blottner, Frederick / Payne, Jeffrey | AIAA | 2003


    Bluff-Body Flow Simulations using Hybrid RANS/LES

    Roy, C. J. / DeChant, L. J. / Payne, J. L. et al. | British Library Conference Proceedings | 2003


    Direct fuel injection for bluff body flame stabilization

    Carrier, D. / De Champlain, A. / Bardon, M. | AIAA | 1996