A minimum-mass optimization strategy for variable-angle-tow panels subject to buckling and manufacturing constraints is presented. The optimization is performed using a fast-running optimization package that employs infinite-strip analysis for buckling and a gradient-based optimization method. A new variable-angle-tow-panel manufacturing method, continuous tow shearing, providing good quality, is considered in the optimization strategy where variable thickness occurs due to the shear deformation of dry tows. Optimum designs of variable-angle-tow panels are obtained and compared with panels without thickness variation. Different panel boundary conditions are investigated and discussed. The results show that boundary conditions have dramatic effects on optimum fiber paths. Over 20% mass saving is obtained for the optimization strategy with thickness variation compared with the design without thickness variation. The buckling strains are reduced to a practical level when the thickness variation is considered in the optimization. The buckling loads and mode shapes obtained from the infinite-strip method are in a good agreement with finite-element results. The optimization strategy provides structurally efficient solutions with good precision and low computational cost.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Buckling Optimization of Variable-Angle-Tow Panels Using the Infinite-Strip Method


    Beteiligte:
    Liu, Wenli (Autor:in) / Butler, Richard (Autor:in)

    Erschienen in:

    AIAA Journal ; 51 , 6 ; 1442-1449


    Erscheinungsdatum :

    2013-03-15


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Buckling Optimization of Variable Angle Tow Panels Using Exact Strip Models

    Liu, Wenli / Butler, Richard / Kim, Hyunsun | AIAA | 2012


    Buckling Optimization of Variable Angle Tow Panels Using Exact Strip Models

    Liu, W. / Butler, R. / Kim, H. et al. | British Library Conference Proceedings | 2012


    Damage Tolerance of Buckling Optimized Variable Angle Tow Panels

    Butler, Richard / Baker, Neil / Liu, Wenli et al. | AIAA | 2009


    Damage Tolerance of Buckling Optimized Variable Angle Tow Panels

    Butler, R. / Baker, N. / Liu, W. et al. | British Library Conference Proceedings | 2009