In this study, the slanted afterbody was modified to more closely represent cargo aircraft afterbodies through the addition of a basal edge fillet. Two slant angles ( ϕ = 32    deg and ϕ = 45    deg ) were explored over two Mach numbers ( M = 0.3 and M = 0.6 ) and two Reynolds numbers ( R e D = 0.832 E 6 and R e D = 1.47 E 6 ) using oil flow visualization and pressure-sensitive paint to identify surface flow phenomena, while the spanwise shadowgraph enabled the observation of mean wake phenomena. The ϕ = 45    deg rounded-edge afterbody surface measurements displayed a centerline-separated vortex state with flow features and regions of suction qualitatively similar to those of the baseline sharp-edge case, with some notable differences. For example, a separation bubble at the slant leading edge is nearly twice the size of the baseline sharp-edge model. This is accompanied by the presence of a “source point,” indicated by a region of high pressure where the flow reattaches, and a tighter counter-rotating vortex pair in comparison to the baseline. The rounded-edge prevented the previously seen compressible transition to a fully separated wake state within the Mach number range studied while showing an increase in separation bubble size with increasing Mach number. Also noteworthy was the existence of a new vortex state for the ϕ = 32    deg model, where the flow remains attached at the model centerline. This is in contrast to the previously observed flow topology of the centerline-separated vortex state in the sharp-edge model, which formed a separation bubble at the model centerline. The transition between the new centerline-attached vortex state and the traditional centerline-separated vortex state was shown to be dependent on both Mach number and Reynolds number, revealing the importance of boundary-layer development on the rounded afterbody flowfield. Overall, these observations indicate that the rounded afterbody produces flowfields with distinct features that vary from the previously described sharp-edge afterbody wake field under certain conditions.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Flow Topology of a Slanted Cylinder with Rounded-Edges Under Compressible Conditions


    Beteiligte:
    Huss, Rhylan A. (Autor:in) / Zigunov, Fernando (Autor:in) / Alvi, Farrukh (Autor:in)

    Erschienen in:

    AIAA Journal ; 61 , 12 ; 5446-5460


    Erscheinungsdatum :

    2023-09-08


    Format / Umfang :

    15 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Unsteady Pressure Dynamics of a Slanted Cylinder with Rounded-Edges in Compressible Flow

    Huss, Rhylan A. / Zigunov, Fernando / Alvi, Farrukh S. | AIAA | 2024


    Flow topology of the slanted cylinder afterbody

    Zigunov, Fernando / Sellappan, Prabu / Alvi, Farrukh S. | AIAA | 2019


    Mean Flow Topology of the Rounded Afterbody in Compressible Flow

    Huss, Rhylan A. / Zigunov, Fernando / Sellappan, Prabu et al. | AIAA | 2023



    Low-Order Modeling of Unsteady Flow Around Airfoils with Rounded Trailing Edges

    Lee, Yi Tsung / Ramesh, Kiran Kumar / Gopalarathnam, Ashok | AIAA | 2022