High-speed rotorcraft experience a region of reversed flow over the retreating blade at high advance ratios. This reverse flow region results in multiple unfavorable effects, including negative lift, increased drag, and a large pitching moment impulse. The effect of the sweep angle on a rotor blade in reverse flow was explored, and it was demonstrated that the introduction of a trailing edge reflex camber could mitigate the adverse effects seen in this regime. A cantilevered, finite-span NACA 63-218 blade was examined at a Reynolds number R e c = 2.38 × 10 5 both with and without a 10° trailing edge reflex camber. Three blades were tested: one with 20° forward sweep, one with 20° backward sweep, and one with no sweep. The experiments consisted of load measurements across a range of angles of attack, as well as volumetric flowfield measurements using stereoscopic particle image velocimetry on the two swept models at 10° angle of attack in reverse flow. The flowfields exhibited a highly three-dimensional separation bubble that existed on the blades in both backward and forward sweep conditions. Cambering of the trailing edge led to almost complete flow attachment on the backward swept model and a significant reduction in separation over the forward swept model. Cambering also led to a large reduction in drag in the entire reverse flow regime in both swept and unswept conditions. A large reduction in pitching moment and a smaller reduction in negative lift were also observed at moderate angles of attack.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Control of Reverse Flow over Cantilevered Swept Blades Using Passive Camber Morphing


    Beteiligte:
    Nelson, Cooper (Autor:in) / Kumar Guha, Tufan (Autor:in) / Amitay, Michael (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2024-01-31


    Format / Umfang :

    14 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Control of Reverse Flow Over a Cantilevered Swept Blade Using Passive Camber Morphing

    Nelson, Cooper / Guha, Tufan K. / Amitay, Michael | TIBKAT | 2022


    Control of Reverse Flow over a Cantilevered Swept Blade using Passive Camber Morphing

    Nelson, Cooper / Guha, Tufan K. / Amitay, Michael | AIAA | 2022


    Control of Reverse Flow over a Cantilevered Blade Using Passive Camber Morphing

    Ko, Deanna / Guha, Tufan Kumar / Amitay, Michael | AIAA | 2021


    Unsteady aerodynamic optimization of the camber of a morphing airfoil for rotorcraft blades

    Cortesi, Andrea Francesco / Fusi, Francesca / Quaranta, Giuseppe | AIAA | 2015


    Design and Validation of a Passive Camber Morphing Concept for Rotorcraft

    Zahoor, Yasir / Sodja, Jurij / De Breuker, Roeland et al. | AIAA | 2022