Transverse rectangular microgrooves with local machining flaw are investigated using direct numerical simulations from the viewpoint of suppressing the second-mode instability in a Mach 6 hypersonic boundary layer. Two types of machining flaw are modeled for the local deformation of microgrooves, i.e., chamfered and protruded ones. The effect of locally deformed microgrooves on the boundary-layer stability is studied by superposing the second-mode disturbance to the base flow of the boundary layer. The investigated unstable second mode is 400 kHz, and the microgrooves are installed in its synchronous region. The results show that compression and expansion waves are generated on the surface of the deformed microgrooves, and microscale separation bubbles are formed at the rear edge of the deformed microgrooves. With the increase of local deformation height of microgrooves, the suppression effect of the second-mode disturbance gradually increases. As the deformation height reaches 0.09 mm, the amplitude inhibition rate of locally deformed microgrooves on the second-mode disturbance reaches 44.7%, compared to that of the regular one.
Hypersonic Boundary-Layer Instability Suppression by Transverse Microgrooves with Machining Flaw
AIAA Journal ; 61 , 3 ; 1021-1031
2023-01-09
11 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
HYPERSONIC BOUNDARY-LAYER INSTABILITY WITH CHEMICAL REACTIONS
British Library Conference Proceedings | 2010
|NUMERICAL SIMULATIONS OF HYPERSONIC BOUNDARY-LAYER INSTABILITY WITH LOCALIZED ROUGHNESS
British Library Conference Proceedings | 2011
|