An efficient high speed aircraft design must achieve a high lift to drag ratio at transonic and supersonic speeds. In 1952 Dr. R. T. Jones proved that for any flight Mach number minimum drag at a fixed lift is achieved by an elliptic wing planform with an appropriate oblique sweep angle. Since then, wind tunnel tests and numerical flow models have confirmed that the compressibility drag of oblique wing aircraft is lower than similar symmetrical sweep designs. At oblique sweep angles above thirty degrees the highly asymmetric planform gives rise to aerodynamic and inertia couplings which affect stability and degrade the aircraft's handling qualities. In the case of the NASA-Rockwell Oblique Wing Research Aircraft, attempts to improve the handling qualities by implementing a stability augmentation system have produced unsatisfactory results because of an inherent lack of controllability in the proposed design. The present work focuses on improving the handling qualities of oblique wing aircraft by including aerodynamic configuration parameters as variables in the control system synthesis to provide additional degrees of freedom with which to further decouple the aircraft's response. Handling qualities are measured using a quadratic cost function identical to that considered in optimal control problems, but the controller architecture is not restricted to full state feedback. An optimization procedure is used to simultaneously solve for the aircraft configuration and control gains which maximize a handling qualities measure, while meeting imposed constraints on trim. In some designs wing flexibility is also modeled and reduced order controllers are implemented. Oblique wing aircraft synthesized by this integrated design method show significant improvement in handling qualities when compared to the originally proposed closed loop aircraft. The integrated design synthesis method is then extended to show how handling qualities may be traded for other types of mission performance (drag, weight, etc.). Examples are presented which show how performance can be maximized while maintaining a desired level of handling quality.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Integrated Aerodynamic and Control System Design of Oblique Wing Aircraft


    Contributors:

    Publication date :

    1990-01-01


    Type of media :

    Theses


    Type of material :

    No indication


    Language :

    English





    Oblique wing aircraft flight control system

    CLARK, R. N. / LETRON, X. J. Y. | AIAA | 1989


    Oblique Wing Aircraft

    Torenbeek, Egbert | Wiley | 2020


    Structural and aerodynamic considerations for an oblique all-wing aircraft

    WATERS, M. / ARDEMA, M. / ROBERTS, C. et al. | AIAA | 1992


    Wing Design of an Oblique Wing Combat Aircraft

    Nangia, R.K. / Greenwell, D.I. / International Council of the Aeronautical Sciences | British Library Conference Proceedings | 2000