Synonyme wurden verwendet für: Modellmethode
Suche ohne Synonyme: keywords:("Modellmethode")

1–20 von 1,030 Ergebnissen
|

    Structural Damage Detection Based on Proper Orthogonal Decomposition: Experimental Verification

    Galvanetto, Ugo / Surace, Cecilia / Tassotti, Alessandra | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Calibration and Uncertainty Analysis for Computer Simulations with Multivariate Output

    McFarland, John / Mahadevan, Sankaran / Romero, Vicente et al. | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Heat Transfer Modeling

    Reply by the Authors to T. E. Tezduyar

    Zhang, Wenqing / Accorsi, Michael L. / Leonard, John W. | AIAA | 2008
    Schlagwörter: Structural Modeling

    Robust Eigenvalue Analysis Using the Structured Singular Value: The µ-p Flutter Method

    Borglund, Dan | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Introduction: High Velocity Impact

    Nicholas, Theodore | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Numerical Modeling

    Stress-Based Optimization Method for Reproducing In-Flight Loads Using Concentrated Forces

    Bou-Mosleh, Charbel / Farhat, Charbel | AIAA | 2008
    Schlagwörter: Finite Element Modeling , Structural Modeling

    Spillover Phenomenon in Quadratic Model Updating

    Chu, Moody T. / Datta, Biswa / Lin, Wen-Wei et al. | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Variable Kinematic Model for the Analysis of Functionally Graded Material plates

    Carrera, E. / Brischetto, S. / Robaldo, A. | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Improved Component-Mode Synthesis for Nonclassically Damped Systems

    Liu, M. H. / Zheng, G. T. | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Truss Beam with Tendon Diagonals: Mechanics and Designs

    Greschik, Gyula | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Turbofan Aft Noise Predictions Based on Lilley's Wave Model

    Casalino, Damiano / Genito, Mariano | AIAA | 2008
    Schlagwörter: Numerical Modeling

    Reduced-Order Model Construction Procedure for Robust Mistuning Identification of Blisks

    Madden, Andrew C. / Castanier, Matthew P. / Epureanu, Bogdan I. | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Study of Damping Linearity of Jointed Metal Plates

    Walker, Scott J. I. / Aglietti, Guglielmo S. / Cunningham, Paul | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Analytical Model for Characterization of Loop Heat Pipes

    Launay, Stéphane / Sartre, Valérie / Bonjour, Jocelyn | AIAA | 2008
    Schlagwörter: Numerical Modeling

    Robust Updating of Uncertain Computational Models Using Experimental Modal Analysis

    Soize, Christian / Capiez-Lernout, Evangéline / Ohayon, Roger | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Development of a Preliminary Model-Scale Adaptive Jet Engine Chevron

    Turner, Travis L. / Cabell, Randolph H. / Cano, Roberto J. et al. | AIAA | 2008
    Schlagwörter: Numerical Modeling

    Stability and Performance of a Smart Double Panel with Decentralized Active Dampers

    Alujević, Neven / Frampton, Kenneth D. / Gardonio, Paolo | AIAA | 2008
    Schlagwörter: Finite Element Modeling

    Improved Model for the Penetration of Liquid Jets in Subsonic Crossflows

    Mashayek, A. / Jafari, A. / Ashgriz, N. | AIAA | 2008
    Schlagwörter: Numerical Modeling

    Best Strip-Beam Properties Derivable from Classical Lamination Theory

    Yu, Wenbin / Hodges, Dewey H. | AIAA | 2008
    Schlagwörter: Structural Modeling

    Interpolation Method for Adapting Reduced-Order Models and Application to Aeroelasticity

    Amsallem, David / Farhat, Charbel | AIAA | 2008
    Schlagwörter: Structural Modeling