1–20 von 230 Ergebnissen
|

    New Model for University Research and Technology Transfer

    DiAntonio, Stephen A. | SAE Technical Papers | 2010
    to benefit society through the free dissemination of knowledge.Though the academic research model still adequately describes most university ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Education and training , Research and development

    Development of Load Reconstruction Technique and Application on Commercial Vehicle Suspension

    Apte, Amol / Pratap, Rajat / Bhosale, Subhash Hanmant | SAE Technical Papers | 2023
    is that the structure needs to be modified to accept the load cell, and not all desired loading degrees of freedom (DOFs ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    Experimentally Adjusted Modelling and Simulation Technique for a Catamaran Autonomous Surface Vessel

    Astrov, Igor / Udal, Andres / Molder, Heigo et al. | IEEE | 2022
    developed in Tallinn University of Technology. Applicability of vessel model is maneuvers where ASV is controlled by a PID controller. The maneuvers ...

    The Placement of Digitized Objects in a Point Cloud as a Photogrammetric Technique

    Lebak, Gabriel / Harrington, Shawn | SAE Technical Papers | 2018
    seen in the video perspective. In this research, the proposed photogrammetric technique of visually placing objects within three-dimensional ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development , Computer software and hardware

    A Novel Singular Perturbation Technique for Model-Based Control of Cold Start Hydrocarbon Emission

    Ghaffari, Ali / Shahbakhti, Mahdi / Amini, Mohammad Reza | SAE Technical Papers | 2014
    ) engines in spite of about three decades of research in this area. This paper proposes a cold start HC emission control strategy based on a reduced ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Starters and starting

    Statistical Methods and Highway Safety Performance 2015. Transportation Research Record: Journal of the Transportation Research Board, No. 2515

    NTIS | 2015
    Transportation Research Record: Journal of the Transportation Research Board, No. 2515, explores 15 papers related to statistical methods ...
    Verlag: Transportation Research Board, Washington, DC.

    Design Considerations for a Micro Aerial Vehicle Aerodynamic Characterization Facility at the University of Florida Research and Engineering Education Facility

    Babinsky, Holger / Cattafesta, Lou / Abate, Gregg | AIAA | 2006
    Verlag: The American Institute of Aeronautics and Astronautics

    Research and Development Panel: Research and Development Panel, 11:40-12:30, Tuesday, 15 October 2019

    Conference/Talk
    Schmehl, Roland / Petrick, Kristian / Weber, Jochem et al. | TIB AV-Portal | 2020
    Verlag: Delft University of Technology , University of Strathclyde

    A Novel Technique to Determine Free-Stream Velocity from Ground-Based Anemometric Measurements During Track Tests

    Tanguay, Bernard | SAE Technical Papers | 2016
    measurements. The end objective of this research was to enhance the reliability of the prediction of free-stream conditions in order to improve the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    Application of the Hardware-in-the-Loop Technique to an Elastomeric Torsional Vibration Damper

    Mendes, Alexandre Schalch / Meirelles, Pablo Siqueira | SAE Technical Papers | 2013
    This work describes the development and use of the Hardware-in-the-Loop (HIL) technique to evaluate the dynamic behavior of a torsional ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Dampers and shock absorbers

    Steel Technology, Ingenuity and the Future

    Lecture
    Bhadeshia, Harry | TIB AV-Portal | 2012
    A elegant lecture on the creativity and thought processes needed to nurture the already vibrant steels research and development. A lecture ...
    Verlag: University of Cambridge

    Numerical Analysis of Armored Fighting Vehicle Escape Hatch Subjected to Mine Blast Loading Using Coupled Eulerian-Lagrangian Technique

    Kumar, J. Rajesh / Parthasarathy, Sundaresan | SAE Technical Papers | 2023
    This article describes the research work taken to compare the effect of air blast and surface-buried mine blast loading ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Mining vehicles and equipment , Simulation and modeling

    Examination of the Maskell III Blockage Correction Technique for Full Scale Testing in the NRC 9-Meter Wind Tunnel

    Leuschen, Jason / Mébarki, Youssef | SAE Technical Papers | 2012
    The 9-meter wind tunnel of the National Research Council (NRC) of Canada is commonly employed in full-scale testing of class 8 tractors ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    University of Florida Research Program in Robotics. Robotics Technology Development Program. Final Technical Annual Report September 1, 2006-August 31, 2007

    J. S. Tulenko / C. D. Crane | NTIS | 2007
    The University Research Program in Robotics (URPR) is an integrated group of universities performing fundamental research that addresses ...
    Verlag: Florida Univ., Gainesville. Dept. of Nuclear and Radiological Engineering
    Schlagwörter: Research Program Administration & Technology Transfer , Research programs , Technology development

    Recycling and the History of Science and Technology

    Interview
    Werrett, Simon | TIB AV-Portal | 2011
    Verlag: Rachel Carson Center for Environment and Society (RCC)
    Schlagwörter: philosophy of science

    Design, Analysis, and Optimization of Off-Highway Rear Dump Truck Chassis Frame Rail Profile Using Design Exploration and Finite Element Analysis Technique

    J, Avinash | SAE Technical Papers | 2024
    research study used a combination of analytical calculations, mathematical modeling, and design exploration ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Mining vehicles and equipment , Off-highway vehicles and equipment

    Syracuse University Center for Training and Research in Hypersonics

    J. LaGraff | NTIS | 2000
    Syracuse University. These centers are dedicated to research and education in hypersonic technologies and have the objective of educating the next ...
    Schlagwörter: Space Technology , Research and development

    Improvements of the Beamforming Technique in Pininfarina Full Scale Wind Tunnel by using a 3D Scanning System

    Bianco, A. / Maffei, M. | SAE Technical Papers | 2008
    the localization of internal and external noise sources of the vehicle is becoming more and more important.The “Beamforming” technique is a ...
    Verlag: Society of Automotive Engineers , SAE International

    Investigation of Air Transportation Technology at Princeton University, 1991-1992

    R. F. Stengel | NTIS | 1993
    ) microburst hazards to aircraft; and (6) fundamental dynamics of atmospheric flight. This research has resulted in a number of publications, including ...
    Verlag: Princeton Univ., NJ. Dept. of Mechanical and Aerospace Engineering