1–20 von 50 Ergebnissen
|

    Experimental study of the flow characteristics in an automotive HVAC system using a PIV technique

    Ji, H. S. / Lee, S. J. | Online Contents | 2009
    Abstract Air flow inside an automotive HVAC module was visualized using a high-resolution PIV technique with varying temperature control ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Analysis of Thrust Bearing Impact on Friction Losses in Automotive Turbochargers

    Lueddecke, Bernhardt | Online Contents | 2015
    The importance of automotive turbocharger performance is continuously increasing. However, further gains in efficiency are becoming ...

    Research on optimization of the suction parameters of an automotive wind tunnel

    Yi Yang | Online Contents | 2015
    The suction system of an automotive wind tunnel is important in guaranteeing the precision of experimental data. Optimization methodology ...
    Schlagwörter: Automotive engineering , Design of experiments

    Loosening analysis for fastening screw of automotive door trim parts

    Yang, S. M. / Yoo, S. H. / Gi, D. S. et al. | Online Contents | 2016
    , plastic materials are commonly susceptible to the environment. In this study, the fastening screw of automotive door trim parts is selected. First ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Solution for failure analysis of automotive axle knuckle pull-out

    Baynal, K. / Makaraci, M. / Gulbudak, K. | Online Contents | 2010
    Abstract A completely safe engineering solution to the automotive assembly line knuckle ball-joint pull-out problem is achieved using ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Three-dimensional finite element model of an automotive clutch for analysis of axial vibrations

    Aktir, Y | Online Contents | 2016
    Recent progress made in making clutches lightweight and in reducing torsional vibrations has led to the emergence of new vibroacoustic ...
    Schlagwörter: Automotive engineering

    Gate shape optimization using design of experiment to reduce the shear rate around the gate

    Juraeva, M. / Ryu, K. J. / Song, D. J. | Online Contents | 2013
    and repetitive use of the mold, especially in certain molding parts as BMC reflector in automotive parts, so it has become the subject of ...

    Numerical and experimental investigations of the shaft-clinching assembly process of automobile wheel-hub-bearing units

    Qu, J | Online Contents | 2016
    A shaft-clinching process aimed at developing a lightweight, integrated and highly reliable assembly is a very effective technique for the ...
    Schlagwörter: Automotive engineering

    Oil-Free Automotive Turbochargers: Drag Friction and On-Engine Performance Comparisons to Oil-Lubricated Commercial Turbochargers

    Ryu, Keun | Online Contents | 2016
    Oil-free bearings for automotive turbochargers (TCs) offer unique advantages eliminating oil-related catastrophic TC failures (oil coking ...

      Oil-Free Automotive Turbochargers: Drag Friction and On-Engine Performance Comparisons to Oil-Lubricated Commercial Turbochargers

      Ryu, Keun | Online Contents | 2017
      Oil-free bearings for automotive turbochargers (TCs) offer unique advantages eliminating oil-related catastrophic TC failures (oil coking ...

    Integration of experiment and hydrostatic fluid-structure finite element analysis into dynamic characteristic prediction of a hydraulically damped rubber mount

    Wang, L. R. / Lu, Z. H. / Hagiwara, I. | Online Contents | 2010
    and fluid track linking chambers. In this paper, an experimental analysis and hydrostatic finite element (FE) modeling technique are ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Establishment of an installation process of a valve seat to a cylinder head using the cae technique

    Lee, K. W. / Yeom, D. J. | Online Contents | 2012
    developed here exhibits a concurrence with experimental results. Utilizing the DOE (Design of Experiments) technique, we determined the effects of ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Investigation of reactivity-controlled compression ignition combustion in a two-stroke engine

    Miles, S. R | Online Contents | 2016
    In this study, a two-stroke outboard engine was modified to accommodate two direct fuel injectors for reactivity-controlled compression ...
    Schlagwörter: Experiments , Automotive engineering

    Fuel adjustment to achieve a smooth net indicated mean effective pressure during mode switching from homogeneous charge compression ignition to conventional diesel compression ignition in a transient hydrocarbon emissions study

    Shi, L | Online Contents | 2016
    transient emissions occur in the transitional cycles between modes. In this study, first, experiments were performed to characterize the hydrocarbon ...
    Schlagwörter: Experiments , Automotive engineering

    Boundary detection with a road model for occupancy grids in the curvilinear coordinate system using a downward-looking lidar sensor

    Kim, J. S | Online Contents | 2016
    occupancy grid map in curvilinear space. The proposed method was validated by an experiment at Hanyang University campus and the quantitative ...
    Schlagwörter: Experiments , Automotive engineering

    Rollover prevention for sport utility vehicles using a pulsed active rear-steering strategy

    Zhang, Y | Online Contents | 2016
    describes a system and a method of enhancing vehicular stability to reduce the likelihood of rollover for motor vehicles, and in particular for ...
    Schlagwörter: Automobile safety , Experiments , Automotive engineering

    Influence of Biodiesel Blended in Gasoline-Based Fuels on Macroscopic Spray Structure from a Diesel Injector

    Thongchai, Sakda / Lim, Ocktaeck | Online Contents | 2019
    Abstract This research investigates the spray characteristics of gasoline-biodiesel blended fuels (GB), which expected to be utilized in a ...
    Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul