1–20 von 284 Ergebnissen
|

    Zinc Phosphate Treatment Paint Base

    SAE Technical Papers | 2019
    . AMS2480J results from a Five-Year Review and update of this specification with changes to title, ordering information, hydrogen embrittlement ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    XMM - RGS Cryogenic Detector Housing

    Heidenreich, G. / Thomsen, K. | SAE Technical Papers | 1994
    (CCD) as detectors. Thermal requirements are the main driver for the layout of the detector housing. Parasitic heat inputs stem primarily from ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Windshield Investigation - Manufacturing & Installation Stresses

    Trate, Daryl J. / Griffin, John A. / Zickel, Michael | SAE Technical Papers | 1999
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Wide Temperature Magnetization Characteristics of Transverse Magnetically Annealed Amorphous Tapes for High Frequency Aerospace Magnetics

    Schwarze, Gene E. / Niedra, Janis M. | SAE Technical Papers | 1999
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Wide Temperature Core Loss Characteristics of Transverse Magnetically Annealed Amorphous Tapes for High Frequency Aerospace Magnetics

    Schwarze, Gene E. / Niedra, Janis M. | SAE Technical Papers | 1999
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Use of High Strength Structural Steels

    Grotto, LeRoy A. | SAE Technical Papers | 1971
    The high strength, heat treated weldable steels are very sophisticated steels, but unless the designer specifying these steels is equally ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed

    SAE Technical Papers | 2006
    This specification covers a titanium alloy in the form of sheet, strip, and plate. AMS 4989A is a revision of the title and update of this ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated

    SAE Technical Papers | 2014
    from an update of this specification that revises the title, restricts material to the sizes of the mechanical property tables (1.1), requires ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V, Extra Low Interstitial (ELI) Beta Annealed

    SAE Technical Papers | 2023
    thickness (see 8.6). AMS4905G results from a Five-Year Review and update of this specification with changes to revise the title and UNS reference ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Through Process Characterisation of Steel for Hydroformed Body Structure Components

    Davies, G. M. / Boyles, M. W. | SAE Technical Papers | 1999
    for the purposes of component design. Additionally, inter-stage heat treatments will modify material properties and, since the through-process ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    The Structure and Mechanical Properties of the Al-Li Base Alloys with Ti Additions

    Vasilescu, Ioana / Vasilescu, Marius | SAE Technical Papers | 2002
    elaboration and casting, the conditions of plastic deformations and heat treatment, these alloys can present mechanical and plasticity properties ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Thermal Pretreatment of Waste Hygiene Water

    Garmon, Frank C. / Ames, Robert K. | SAE Technical Papers | 1991
    cycling.Except for survival of the challenge thermophile and some naturally present thermophiles, thermal treatment above 85° C was successful in ...
    Verlag: Society of Automotive Engineers , SAE International

    THERMAL ANALYSIS OF HIGH POWER HYBRID ELECTRONIC CIRCUITS FOR MOTORBIKE REGULATORS

    Franchi, Emilio / Bagnoli, Paolo Emilio / Di Pascoli, Stefano | SAE Technical Papers | 2001
    abnormal over-heating, causing the system failure, due to unsuitable heat dissipation capabilities of the assembling structure. The thermal ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    The Potential for use of Heat Treated Aluminum High Pressure Die-Castings in Engine Applications

    Lumley, Roger N. | SAE Technical Papers | 2008
    blistering and dimensional instability. Recently a modified heat treatment regime has been developed which avoids these problems and allows large ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Theoretical Wear Rate Prediction and Experimental Validation of Repeatedly Operated Solenoid Valve

    Balasubramaniyan, Sakthivel / Ramachandran, Sridhar / Bashyam, Srinivasan et al. | SAE Technical Papers | 2017
    performance of the solenoid mainly depends on the plunger and valve case, it is necessary to have an optimum material, heat treatment and surface ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    The Behaviour at Cold Plastic Deformation of Al-Li Base Alloys Used in Aeronautical Constructions

    Vasilescu, Ioana / Vasilescu, Marius | SAE Technical Papers | 2002
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Texture and Formability in Aluminum Alloy Sheets

    Inoue, Hirofumi / Takasugi, Takayuki | SAE Technical Papers | 2003
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Testing of 300 Series Stainless Steel Tubing for Aerospace Applications

    Chapman, Mel | SAE Technical Papers | 2009
    requirements including composition, grain size, heat treating, passivation, pressure testing, formability, non-destructive testing, and sampling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Tensile and Fatigue Behavior of Shallow Cryogenically Treated EN19 Alloy Steel

    Sekar, Loganathan / Raj, Rajendran / Arasan, Tamil | SAE Technical Papers | 2019
    mechanical behavior. The test samples were conventionally heat treated then oil quenched at room temperature. Followed by the samples were kept for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Synthesis and Evaluation of Activated Carbon Composite Photocatalysts for Surface Enhanced Raman Scattering: Photocatalytic Layer Coating

    Wu, Chang-Yu / Mazyck, David W. / Powers, Kevin et al. | SAE Technical Papers | 2004
    n-butoxide with subsequent heat treatment at 500°C for three hours in Argon. Our ultimate goal is to create a particle with regenerative ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment