1–20 von 876 Ergebnissen
|

    Nautical risk assessment for LNG operations at the port of koper

    Perkovic, Marko / Gucma, Lucjan / Przywarty, Marcin et al. | Tema Archiv | 2012
    Italy. Focusing on nautical operations, the purpose of this paper is to identify potential risks and to assess their levels as consequences of ...

    Multibody modeling of engage and disengage operations of helicopter rotors

    Bottasso, C.L. / Bauchau, O.A. | Tema Archiv | 2001
    This paper deals with the modeling of the engage and disengage operations of a helicopter rotor during which blades can come in ...

    Adaptive control strategy for the dynamic positioning of a shuttle tanker during offloading operations

    Tannuri, Eduardo A. / Kubota, Leonardo K. / Pesce, Celso P. | Tema Archiv | 2006
    control the position of the shuttle tanker during offloading operations from a FPSO (floating production, storage, and offloading system). DPS ...

    Design of a high-altitude long-endurance solar-powered unmanned air vehicle for multi-payload and operations

    Romeo, G. / Frulla, G. / Cestino, E. | Tema Archiv | 2007
    Several researches are being carried out at the Politecnico di Torino with the aim of designing a high altitude very-long endurance ...

    Thermal models of railroad wheels and bearings

    Cole, K.D. / Tarawneh, C.M. / Fuentes, A.A. et al. | Tema Archiv | 2010
    The rolling surface for railroad wheels can be a heat source that may have an impact on the performance of the wheel bearing. In this study ...

    Deformation analysis of large aerospace components during assembly

    Saadat, Mozafar / Cretin, Lylian / Sim, Roy et al. | Tema Archiv | 2009
    predict overall deformation between the alignment of the rib foot and the skin panel. The assembly operations and conditions encountered on the ...

    Numerical evaluation of a dual-function microporous layer under subzero and normal operating temperatures for use in automotive fuel cells

    Ko, Johan / Ju, Hyunchul | Tema Archiv | 2014
    volume for ice storage during cold-start PEFC operations. Although the benefit of using a dual-function MPL was numerically elucidated in our ...

    Definition of spacing constraints for the car sequencing problem

    Lesert, Aymeric / Alpan, Gulgun / Frein, Yannick et al. | Tema Archiv | 2011
    each work station is not exceeded. Some types of vehicles require several time-consuming operations to be done on a work station and will ...

    Application of mesh morphing technology in the concept phase of vehicle development

    Auweraer, H. Van der / Langenhove, T. Van / Brughmans, M. et al. | Tema Archiv | 2007
    DCBs. The creation of the second set of control blocks is most time-consuming and it involves a series of morphing operations that may need to ...

    Effect of increase in weight and stiffness of vehicles on the safety of rear seat occupants

    Esfahani, Elham Sahraei / Marzougui, Dhafer / Digges, Kennerly et al. | Tema Archiv | 2011
    In this study, full-scale finite element (FE) simulations have been performed to identify factors affecting the protection of rear seat ...

    A multi-objective surrogate-based optimization of the crashworthiness of a hybrid impact absorber

    Costas, M. / Diaz, J. / Romera, L. et al. | Tema Archiv | 2014
    This paper applies surrogate-based multi-objective optimization techniques to a crashworthiness problem in which the impact performance of ...

    Optimisation of the Nonlinear Suspension Characteristics of a Light Commercial Vehicle

    Özcan, Dincer / Sönmez, Ümit / Güvenc, Levent et al. | Tema Archiv | 2013
    The optimum functional characteristics of suspension components, namely, linear/nonlinear spring and nonlinear damper characteristic ...

    Numerical simulation of crash impact test for fuel cell group of rotorcraft

    Kim, Hyun-Gi / Kim, Sungchan | Tema Archiv | 2014
    Crashworthy fuel cell has been widely applied to rotorcraft for improving the survivability of crews. Because the aircraft fuel cell has ...
    Schlagwörter: USA (United States of America)

    Influence of the body on the response of the helmeted head during impact

    Ghajari, Mazdak / Galvanetto, Ugo / Iannucci, Lorenzo et al. | Tema Archiv | 2011
    The most frequent type of injury that causes death or disability in motorcycle accidents is head injury. The only item of personal ...

    FE Analysis of Dynamic Response of Aircraft Windshield against Bird Impact

    Dar, Uzair Ahmed / Zhang, Weihong / Xu, Yingjie et al. | Tema Archiv | 2013
    . Windshield is the frontal part of cockpit and more susceptible to bird impact. In the present study, finite element (FE) simulations were performed ...

    Development and application of reduced-order modeling procedures for subsurface flow simulation

    Cardoso, M.A. / Durlofsky, L.J. / Sarma, P. | Tema Archiv | 2009
    The optimization of subsurface flow processes is important for many applications, including oil field operations and the geological storage ...

    Simple and accurate thermal simulation model of supercapacitor suitable for development of module solutions

    Frivaldsky, Michal / Cuntala, Jozef / Spanik, Pavol | Tema Archiv | 2014
    In this article, first the design procedure of the thermal model of a EDLC type wound capacitor (Electrochemical double layer capacitor) is ...

    Optimization of the angle of attack of delta-winglet vortex generators in a plate-fin-and-tube heat exchanger

    Lemouedda, A. / Breuer, M. / Franz, E. et al. | Tema Archiv | 2010
    surfaces in plate-fin-and-tube banks. In this study optimal angles of attack of the delta-winglets are investigated based on the Pareto optimal ...

    On-board state of health monitoring of lithium-ion batteries using incremental capacity analysis with support vector regression

    Weng, Caihao / Cui, Yujia / Sun, Jing et al. | Tema Archiv | 2013
    Battery state of health (SOH) monitoring has become a crucial challenge in hybrid electric vehicles (HEVs) and all electric vehicles (EVs ...
    Schlagwörter: state-of-health

    Influence of cellular imperfections on mechanical response of metallic foams

    Attia, M.S. / Meguid, S.A. / Tan, K.T. et al. | Tema Archiv | 2010
    In this paper, we develop and implement high-resolution, computationally efficient multi-cell finite-element (FE) models of metallic foams ...