Synonyme wurden verwendet für: Kühlkreislauf
Suche ohne Synonyme: keywords:("Kühlkreislauf")

1–50 von 70 Ergebnissen
|

    Three-dimensional finite element prediction of transient thermal history and residual deformation due to line heating

    Biswas, P / Mandal, N R / Sha, O P | SAGE Publications | 2007
    Schlagwörter: cooling rate

    Three-dimensional coupled thermo-mechanical analysis for fatigue failure of a heavy vehicle brake disk: Simulation of braking and cooling phases

    Rouhi Moghanlou, Mohammad / Saeidi Googarchin, Hamed | SAGE Publications | 2020
    Schlagwörter: Braking and cooling phases

    Thermal imaging as flow visualization for gas-turbine film cooling

    Sangan, C M / Zhou, K / Litherland, K et al. | SAGE Publications | 2011
    Schlagwörter: turbine cooling

    Theoretical and experimental investigation of the aerodynamic drag due to automotive cooling systems

    Barnard, R. H. | SAGE Publications | 2000
    Schlagwörter: vehicle cooling system drag , vehicle cooling system design , Automotive cooling systems

    The impact of inlet flow conditions on the aerodynamic performance of an NACA submerged intake for ground vehicle applications

    Holt, Jenny C / Garry, Kevin P | SAGE Publications | 2013
    Schlagwörter: automotive cooling

    Showerhead film cooling injection orientation design on the turbine vane leading edge considering representative lean burn combustor outflow

    Wu, Zhuang / Zhu, Hui-ren / Liu, Cun-liang et al. | SAGE Publications | 2021
    Schlagwörter: film cooling

    Review of engine cooling technologies for modern engines

    Pang, H H / Brace, C J | SAGE Publications | 2004
    Schlagwörter: engine cooling

    Research status of active cooling of endothermic hydrocarbon fueled scramjet engine

    Ning, Wang / Yu, Pan / Jin, Zhou | SAGE Publications | 2013
    Schlagwörter: Active cooling

    Research on the flow field and film cooling effectiveness of the endwall with swirling film cooling

    Zhang, Jian / Zheng, Qun / Li, Zhaolin et al. | SAGE Publications | 2023
    Schlagwörter: film cooling , endwall cooling

    Piston temperature model oriented to control applications in diesel engines

    Cho, Hoon / van Nieuwstadt, Michiel | SAGE Publications | 2018
    Schlagwörter: piston cooling jet

    Performance improvement of a high pressure ratio centrifugal compressor by integrated cooling

    Mostafa Moosania, Seyed / Zheng, Xinqian | SAGE Publications | 2016
    Schlagwörter: integrated cooling

    Performance cycle analysis of an open cooling cycle for a scramjet

    Qin, Jiang / Bao, Wen / Zhou, Weixing et al. | SAGE Publications | 2009
    Schlagwörter: open cooling cycle , regenerative cooling

    Parametric study of the effects of the design factors on the performance of a heat recovery system obtained from an exhaust gas in a gasoline engine

    Lee, Jaemin / Choi, Kyungwook / Lee, Kihyung et al. | SAGE Publications | 2014
    Schlagwörter: engine cooling

    Optimization investigation on the liquid cooling heat dissipation structure for the lithium-ion battery package in electric vehicles

    Xie, Jinhong / Zang, Mengyan / Wang, Shuangfeng et al. | SAGE Publications | 2017
    Schlagwörter: cooling plate , liquid cooling

    Optimisation of a 180° U-shaped bend shape for a turbine blade cooling passage leading to a pressure loss coefficient of approximately 0.6

    Namgoong, Howoong / Ireland, Peter / Son, Changmin | SAGE Publications | 2016
    Schlagwörter: turbine cooling passage

    Optimal HEV cooling system design through a computer-aided virtual development chain

    Baysset, Guillaume / Chessé, Pascal / Chalet, David et al. | SAGE Publications | 2023
    Schlagwörter: cooling system architectures

    Numerical study on the thermal-hydraulic characteristic of an automotive parallel-flow condenser under non-uniform airflow

    Zhao, Lanping / Bao, Guo / Pang, Jiabin | SAGE Publications | 2024
    Schlagwörter: cooling airflow design

    Numerical study of wall cooling effects on transition between shock structures in a rocket propulsion nozzle

    Kharati-Koopaee, Masoud / Khaef, Iman | SAGE Publications | 2015
    Schlagwörter: wall cooling

    Numerical study of liquefied natural gas as a coolant in liquid rocket engines

    Urbano, Annafederica / Nasuti, Francesco | SAGE Publications | 2013
    Schlagwörter: cooling channel

    Noise reduction of automobile cooling fan based on bio-inspired design

    Wang, Shuwen / Yu, Xinke / Shen, Lixia et al. | SAGE Publications | 2021
    Schlagwörter: Automobile cooling fan

    New pressure-based methods for quantifying radiator airflow

    Ng, E Y / Watkins, S / Johnson, P W | SAGE Publications | 2004
    Schlagwörter: engine cooling systems

    Network analysis of a coolant flow performance for the combined impingement and film cooled first-stage of high pressure gas turbine nozzle guide vane

    Reddy Kukutla, Pol / Prasad, BVSSS | SAGE Publications | 2019
    Schlagwörter: combined jet impingement and film cooling

    Modelling of temperatures during railway tread braking: Influence of contact conditions and rail cooling effect

    Teimourimanesh, Shahab / Vernersson, Tore / Lundén, Roger | SAGE Publications | 2014
    Schlagwörter: rail cooling effect

    Modelling and simulation methodology of channel cooling using hydrocarbon fuel as coolant under supercritical pressures

    Bao, W / Li, X-L / Qin, J et al. | SAGE Publications | 2011
    Schlagwörter: cooling

    Mathematical modeling of transpiration cooling in cylindrical domain

    Aybar, Hikmet Ş / Faridani, Mehdi M | SAGE Publications | 2015
    Schlagwörter: Transpiration cooling

    Irreversible cycle analysis of a re-cooled cycle for a scramjet

    Qin, J / Zhou, W X / Bao, W et al. | SAGE Publications | 2010
    Schlagwörter: cooling

    Interaction mechanism between shock waves and supersonic film cooling with cracking reaction

    Zuo, Jingying / Zhang, Silong / Qin, Jiang et al. | SAGE Publications | 2020
    Schlagwörter: Supersonic film cooling

    Intake grille design for an embedded ventilation-and-cooling system in an aircraft

    Mi, Bai-gang / Huang, Heyuan | SAGE Publications | 2022
    Schlagwörter: ventilation-and-cooling system

    Improving turbine endwall cooling uniformity by controlling near-wall secondary flows

    Thomas, Mitra / Povey, Thomas | SAGE Publications | 2017
    Schlagwörter: Film cooling , turbine cooling

    Improving aero-thermal environment in vehicle under-hood through small modification upstream the cooling module

    Zhao, Lanping / Li, Tiantian / Guo, Bentao et al. | SAGE Publications | 2023
    Schlagwörter: cooling airflow characteristics

    Hydrogen-fueled scramjet cooling system investigation using combustor and regenerative cooling coupled model

    Bao, Wen / Duan, Yanjuan / Zhou, Weixing et al. | SAGE Publications | 2014
    Schlagwörter: cooling system

    Heat convection and design of brake discs

    Sakamoto, H | SAGE Publications | 2004
    Schlagwörter: cooling efficiency

    Flow behaviour in vented brake discs with straight and airfoil-shaped radial vanes

    Bombek, Gorazd / Hribernik, Aleš | SAGE Publications | 2023
    Schlagwörter: cooling performance , forced convective cooling

    Film cooling optimization on leading edge gas turbine blade using differential evolution

    García, Juan C / Dávalos, José O / Urquiza, Gustavo et al. | SAGE Publications | 2019
    Schlagwörter: Film cooling

    Experimental study on the effect of the shroud on the performance and flow field of an automotive cooling fan

    Hu, X / Wen, S / Gao, Y et al. | SAGE Publications | 2011
    Schlagwörter: automotive cooling fan

    Experimental study on the effect of different components collocations on flow of automotive cooling fan

    Wen, Suping / Hao, Yuwei / Zhang, Zhixuan et al. | SAGE Publications | 2020
    Schlagwörter: Automotive cooling fan

    Experimental investigation on air-side flow-field and water-side heat exchange performance of radiator based on matrix fans

    Wang, Hongchao / Shan, Xizhuang / Yang, Zhigang | SAGE Publications | 2019
    Schlagwörter: cooling module

    Experimental investigation of the cooling characteristics of a monobloc cast iron brake disc with fingered hub

    Tirovic, Marko / Topouris, Stergios / Sherwood, Glenn | SAGE Publications | 2020
    Schlagwörter: convective cooling

    Experimental and numerical investigations of cooling drag

    Hobeika, Teddy / Sebben, Simone / Löfdahl, Lennart | SAGE Publications | 2017
    Schlagwörter: vehicle cooling , Cooling flow , Cooling drag

    Experimental and modelling aspects of flow boiling heat transfer for application to internal combustion engines

    Robinson, K / Hawley, J G / Campbell, N A F | SAGE Publications | 2003
    Schlagwörter: internal combustion engine cooling

    Evaluation of the Thermofluid Performance of an Automotive Engine Cooling-Fan System Motor

    Savory, E / Martinuzzi, R J / Ryval, J et al. | SAGE Publications | 2011
    Schlagwörter: electric motor cooling

    Effect of the heat exchanger in the waste heat recovery system on a gasoline engine performance

    Choi, Kyungwook / Kim, Kibum / Lee, Kihyung | SAGE Publications | 2015
    Schlagwörter: vehicle cooling

    Effect of jet flow on cooling performance and thermal stress of a radial turbine back disc

    Ma, Chao / Su, Yilong / Zhu, Guangqian et al. | SAGE Publications | 2021
    Schlagwörter: impingement cooling , cooling efficiency

    Effect of coolant additives on thermal loading of a diesel engine

    Selim, M. Y. E. / Helali, A-H B | SAGE Publications | 2001
    Schlagwörter: cooling

    Effect of a curved turning vane on the heat transfer and fluid flow of four-pass internal cooling channels of gas turbine blades

    Pouyaei, Pouya / Kayhani, Mohammad Hassan / Norouzi, Mahmood et al. | SAGE Publications | 2023
    Schlagwörter: Internal cooling

    Design of an oil-cooling-system of new energy vehicle drive motor

    Wan, Zhenping / Dong, Liujie / Wang, Xiaowu et al. | SAGE Publications | 2023
    Schlagwörter: direct contact oil-cooling-system

    Design and analysis of a cooling system for a supersonic exhaust diffuser

    Farahani, M / Fouladi, N / Mirbabaei, AR | SAGE Publications | 2019
    Schlagwörter: water spray cooling

    Cooling system improvements — assessing the effects on emissions and fuel economy

    Brace, C J / Hawley, G / Akehurst, S et al. | SAGE Publications | 2008
    Schlagwörter: cooling systems

    Cooling structure design of gas turbine blade by using multi-level highly efficient design platform

    Zhao, Zhiqi / Luo, Lei / Li, Shouzuo et al. | SAGE Publications | 2021
    Schlagwörter: cooling element method , cooling structure