121–140 von 212 Ergebnissen
|

    Detailed Compositional Comparison of Hydrogenated Vegetable Oil with Several Diesel Fuels and Their Effects on Engine-Out Emissions

    Coffey, Gregory W. / Linehan, John C. / Campbell, Kristen B. et al. | SAE Technical Papers | 2022
    to the chemical characterization of transportation fuels. This article complements a 2017 CRC project to quantify ...
    Verlag: Society of Automotive Engineers , SAE International

    Effects of High Boiling Point Fuel Additives on Deposits in a Direct Injection Gasoline Engine

    Nakata, Koichi / Kitano, Koji / Yokoo, Nozomi et al. | SAE Technical Papers | 2017
    caused compression leakage after fuel consumption of 10 L because the piston rings stuck to the grooves. Chemical analysis of the deposit ...
    Verlag: Society of Automotive Engineers , SAE International

    Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels

    Dean, Anthony M. / Zigler, Bradley T. / Bogin, Gregory et al. | SAE Technical Papers | 2010
    to allow the rapid determination of derived cetane number (DCN).Interest in chemical kinetic models for the ignition of diesel and biodiesel ...
    Verlag: Society of Automotive Engineers , SAE International

    Impact of Simultaneous ETBE and Ethanol Addition on Motor Gasoline Properties

    Karonis, Dimitrios / Lois, Evripidis / Anastopoulos, George et al. | SAE Technical Papers | 2008
    . This paper examines the ability of ETBE to act as a stabilizer in gasoline - ethanol blends. Two gasoline samples with different chemical ...
    Verlag: Society of Automotive Engineers , SAE International

    Steer Guidance Of Autonomous Agricultural Robot Based On Pure Pursuit Algorithm And LiDAR Based Vector Field Histogram

    Freier Zugriff
    Rai Bijay / Matsa Amarendra / Datta Asim | DOAJ | 2023
    The application of autonomous robots has been increasing in agriculture sector to substitute human labour and to improve the production ...
    Schlagwörter: Chemical engineering

    A Numerical Study of the Effects of FAME Blends on Diesel Combustion and Emissions Characteristics Using a 3-D CFD Code Combined with Detailed Kinetics and Phenomenological Soot Formation Models

    Zhou, Beini / Kusaka, Jin / Matsunaga, Mitsuhiro et al. | SAE Technical Papers | 2013
    The objective of the present research is to analyze the effects of using oxygenated fuels (FAMEs) on diesel engine combustion and emission ...
    Verlag: Society of Automotive Engineers , SAE International

    Friction and Film-Formation Properties of Oil-Soluble Inorganic Nanoparticles

    Aradi, Allen A. / Guevremont, Jeffrey M. / ElShall, M. Samy et al. | SAE Technical Papers | 2008
    by forming either a self-assembled organic film (in the case of GMO) or a Mo-disulfide chemical film (in the case of MoDTC). More recently ...
    Verlag: Society of Automotive Engineers , SAE International

    A Numerical Model for Flash Boiling of Gasoline-Ethanol Blends in Fuel Injector Nozzles

    Brusiani, Federico / Bianchi, Gian Marco / Negro, Sergio | SAE Technical Papers | 2011
    Fuels are formulated by a variety of different components characterized by chemical and physical properties spanning a wide range of values ...
    Verlag: Society of Automotive Engineers , SAE International

    Sensitivity Analysis of Ash Packing and Distribution in Diesel Particulate Filters to Transient Changes in Exhaust Conditions

    Sappok, Alexander / Kamp, Carl / Wong, Victor | SAE Technical Papers | 2012
    Current CJ-4 lubricant specifications place chemical limits on diesel engine oil formulations to minimize the accumulation of lubricant ...
    Verlag: Society of Automotive Engineers , SAE International

    Comprehensive Applications Testing of Diesel from a Commercial Scale Gas-to-Liquids Plant

    Swarts, Andre / Bell, Arthur / Mokheseng, Konrad et al. | SAE Technical Papers | 2010
    sense, a series of chemical assessments and applications testing was performed using both neat and blended diesel fuels. These included ...
    Verlag: Society of Automotive Engineers , SAE International

    Measurement of Gaseous and Particulate Emissions from Algae-Based Fatty Acid Methyl Esters

    Marchese, Anthony J. / Fisher, Bethany C. / Collett, Jeffrey L. et al. | SAE Technical Papers | 2010
    Studies have shown that the magnitude of pollutant emissions (e.g., NO and PM) from diesel engines operating on fatty acid methyl esters ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of gasoline formulation on the formation of photosmog: A box model study

    Geiger, H. / Becker, K.H. / Wiesen, P. | Tema Archiv | 2003
    , box model simulations of the irradiation of exhaust/NO x/air mixtures using an established chemical mechanism for a standardized ...

    Characterization of Damaging Biodiesel Deposits and Biodiesel Samples by Infrared Spectroscopy (ATR-FTIR) and Mass Spectrometry (TOF-SIMS)

    Feld, Herbert / Oberender, Nadine | SAE Technical Papers | 2016
    chemical composition of the deposits, samples were taken from affected engine parts and filling stations and examined with a TOF-SIMS instrument ...
    Verlag: Society of Automotive Engineers , SAE International

    Assessing the Impact of FAME and Diesel Fuel Composition on Stability and Vehicle Filter Blocking

    Roy-Smith, Christopher / Bannister, Christopher D. / Chuck, Christopher J. et al. | SAE Technical Papers | 2019
    a large body of work on the oxidative instability of biodiesel in the chemical laboratory is indicative of instability this does not mimic ...
    Verlag: Society of Automotive Engineers , SAE International

    Diesel Particulate Filter System - Effect of Critical Variables on the Regeneration Strategy Development and Optimization

    Yezerets, Aleksey / Suresh, Arvind / Clerc, Jim et al. | SAE Technical Papers | 2008
    Regeneration of diesel particulate filters poses major challenges in developing the particulate matter emission control technology to meet ...
    Verlag: Society of Automotive Engineers , SAE International

    An Experimental Study of Diesel-Fuel Property Effects on Mixing-Controlled Combustion in a Heavy-Duty Optical CI Engine

    Fisher, Brian T. / Mueller, Charles J. / Polonowski, Christopher et al. | SAE Technical Papers | 2014
    ), affected the chemical reactions downstream of H and production of the fuel-rich partially reacted mixture inside the fuel jet. Additionally, the ...
    Verlag: Society of Automotive Engineers , SAE International

    Charge Cooling Effects on Knock Limits in SI DI Engines Using Gasoline/Ethanol Blends: Part 2-Effective Octane Numbers

    Kasseris, Emmanuel / Heywood, John B. | SAE Technical Papers | 2012
    superior chemical resistance to autoignition, therefore allowing the further extension of knock limits. Unlike the charge cooling benefit which is ...
    Verlag: Society of Automotive Engineers , SAE International

    A Novel Technique for Investigating the Characteristics and History of Deposits Formed Within High Pressure Fuel Injection Equipment

    Snape, Colin / Scurr, David / Barker, Jim | SAE Technical Papers | 2012
    rastering of a finely focussed ion beam over the surface yielding mass resolved secondary ion images; chemical maps, and depth profiling. Every ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of molecular marker source profiles for emissions from on-road gasoline and diesel vehicle fleets

    Lough, Glynis C. / Christensen, Charles G. / Schauer, James J. et al. | Tema Archiv | 2007
    dynamometer to develop chemical source profiles for source attribution of atmospheric particulate matter in California's South Coast Air Basin ...

    Comparison of In-Cylinder Soot Evolution in an Optically Accessible Engine Fueled with JP-8 and ULSD

    Zha, Kan / Jansons, Marcis / Florea, Radu et al. | SAE Technical Papers | 2012
    measurements of soot temperature and optical thickness, KL. A 3-D chemical kinetic-coupled CFD model with line of sight integration is employed in ...
    Verlag: Society of Automotive Engineers , SAE International