1–50 von 202 Ergebnissen
|

Ihre Suche:
international symposium on district heating and cooling

    Design and Optimization of Air Intake and Cooling System for Commercial Fuel Cell Electric Vehicles

    Adsul, Aniket / Gadve, Dhananjay / Amancharla, Naga Chaithanya et al. | SAE Technical Papers | 2024
    information available in the public domain about fuel cell technology and its accessories.Air intake and cooling system’s right functioning is very ...
    Verlag: Society of Automotive Engineers , SAE International

    Study on Range Improvement Controls and Method for Electric Vehicles

    Pattalwar, Ashutosh / Verma, Mrinal / Bawa, Vikas et al. | SAE Technical Papers | 2024
    temperature under safe usable limits even during harsh conditions is critical. Simple reduction in energy consumption of electrical cooling/heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: On-board vehicle charging systems

    Effect of Spot Weld Parameter on HAZ of Advanced High Strength Steel Joint

    Paliwal, Lokesh / Misal, Swapnali / Jain, Vikas | SAE Technical Papers | 2024
    hardening. However during heating and cooling cycle in resistance spot welding, martensite phase tempering affects hardness at Heat Affected Zone ...
    Verlag: Society of Automotive Engineers , SAE International

    A Real-World Range Testing and Analysis Methodology Development for Battery Electric Vehicles

    Rajakumar, K. / Omprasad, Karthick / B, Sakthivel et al. | SAE Technical Papers | 2024
    multiple drive modes and regen levels respectively. Also, other attributes such as AC On/Off condition, different loading condition i.e., Number of ...
    Verlag: Society of Automotive Engineers , SAE International

    Cost Effective Techniques for SCEV to Improve Performance & Life of Battery and Motor by Using Efficient Thermal Systems

    Chormule, Suhas Rangrao | SAE Technical Papers | 2024
    systems for battery, motor, cabin and power electronics cooling & heating during various charging and discharge modes at different ambient ...
    Verlag: Society of Automotive Engineers , SAE International

    Evaluation and simulation analysis of airport ground air conditioning operation effect

    Zhuge, Jingchang / Li, Shichao / Kang, Chunhua et al. | SPIE | 2024
    air conditioning to aircraft instead of aircraft APUs. In view of the poor cooling (heating) effect of aircraft ground air conditioning in ...

    Advance Thermal Management System for Electric Vehicle – An Indian Case Study

    Emran, Ashraf / Pawar, Bhushan / Hemkemeyer, David et al. | SAE Technical Papers | 2024
    (e.g., intelligent pre-conditioning, cabin air circulation control and smart ventilation) for cooling, heat pump integration along with the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Low emission vehicles (LEV) and zero emission vehicles (ZEV)

    Computational Modeling of the Flow and Heat Transfer in an Internal Combustion Engine-Relevant Cooling Channel

    Klink, Artur / Hussong, Jeanette / Krüger, Louis et al. | SAE Technical Papers | 2023
    flow and heat transfer processes relevant to cooling systems of internal combustion engines, was computationally investigated by applying a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling , Research and development

    Analysis of the Thermodynamic Effects of a Plate Based on Numerical Simulations

    Qaisar, Abdul / Asary, Abdul Rab / Azeem, Naqash et al. | SAE Technical Papers | 2023
    exchanged between two mediums, the wall or material in-between them is exposed to extreme temperatures (high and low), commonly known as a cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Thermal Reduced Order Modeling for System Analysis of EV Battery

    Majumdar, Abhigyan / Wakale, Anil / Ding, Peiran et al. | SAE Technical Papers | 2023
    The safety, performance, and operational life of power dense Lithium-ion batteries used in Hybrid and Electric Vehicles are dependent on ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Thermomechanical Fatigue Crack Growth Simulation in a Turbo-Housing Model Using Nonlinear Fracture Mechanics

    Kassir, Abdallah / Makke, Ali Hassan / Chang, Cherng-Chi et al. | SAE Technical Papers | 2023
    -viscoplastic FE analysis is used to simulate four heating and cooling cycles of an engine test. The stresses, inelastic strains, and temperature ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Cross-Flow Radiator Design Using CFD for FSAE Car Cooling System and Its Experimental Validation Using the GEMS Data Acquisition System

    Selvaraj, Arunsaco / Devaraj, Elangovan / Jain, Jeevesh et al. | SAE Technical Papers | 2022
    , and radiator material. The purpose of a properly designed radiator is to prevent the combustion engine from heating up above its operating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Data acquisition and handling

    Modeling and Simulation Analysis of Electric Vehicle Thermal Management System Based on Distributed Parameter Method

    Kong, HaiQin / Fan, Shuang / Shangguan, Wen-Bin | SAE Technical Papers | 2022
    and the influence on the heating comfort of the cabin were studied. A control strategy for the rapid cooling of the battery pack was proposed ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Chevrolet Bolt Electric Vehicle Model Validated with On-the-Road Data and Applied to Estimating the Benefits of a Multi-Speed Gearbox

    Emadi, Ali / Machado, Fabricio / Kollmeyer, Phillip | SAE Technical Papers | 2022
    , temperature effects, and heating and cooling energy are included as well. The model predicts an EPA range of ...
    Verlag: Society of Automotive Engineers , SAE International

    Dynamic Modeling Method of Electric Vehicle Thermal Management System Based on Improved Moving Boundary Method

    Kong, HaiQin / Gao, Mingyang / Li, Ruilong et al. | SAE Technical Papers | 2022
    electric vehicles. In recent years, researchers have coupled the heat pump system and the battery cooling system to effectively improve the heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development

    Evaluation of Equivalent Temperature Using Thermal Factors : Validation of a Calculation Method Based on ISO 14505-4:2021 in a Vehicle Cabin

    Matsumoto, Akira / Oi, Hajime / Kondo, Ryota et al. | SAE Technical Papers | 2022
    This paper describes a method for evaluating the equivalent temperature in vehicle cabins based on the new international standard ISO 14505 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Sun and solar , Research and development

    Design of a Human-Centric Auto-Climate Control System for Electric Vehicles

    Tiwari, Ankit / Arsenault, Jeff / Mandali, Satya et al. | SAE Technical Papers | 2022
    cooling. Unlike the central HVAC system, localized heating and cooling devices such as climate-controlled seats, steering wheel heaters, neck ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Willans Line Bidirectional Power Flow Model for Energy Consumption of Electric Vehicles

    Harvey, Dan / Nelson, Douglas | SAE Technical Papers | 2022
    then be applied for other drive cycles, road grades, and parasitic accessory loads due to cabin or battery heating, air conditioning/cooling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sensors and actuators , Simulation and modeling , On-board vehicle charging systems

    Analysis of the Piston Group Friction in a Single-Cylinder Gasoline Engine When Operated with Synthetic Fuel DMC/MeFo

    Kraus, Christoph / Wachtmeister, Georg / Binder, Jürgen et al. | SAE Technical Papers | 2022
    temperatures of the cylinder liner and piston of the research engine were measured. Depending on the load point, friction losses were reduced by up to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    EV System Modelling and Co-Simulation with Integrated HVAC and Auxiliary Models

    Negi, Aditya / Zulkefli PhD, Mohd Azrin / Sadaraboina, Moses Vidya Sagar et al. | SAE Technical Papers | 2021
    HVAC, cooling and heating loops of electronics devices, battery and traction control, are also included. Finally, the results over a typical ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    High Performance HVAC Component Development for EV Using 1-D System Simulation

    Shanmugam, Manivasagam / Radle, Manoj kumar / Jadhav, Swapnil | SAE Technical Papers | 2021
    created in GT-Suite including all the cooling subsystems. The results include various thermal parameters, pull-down performance and the energy ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Numerical Approach to Welding Process and its Integration in Assessment of Fatigue life of Component

    Apte, Amol / Khandagale, Anup / Tare, Kedar | SAE Technical Papers | 2021
    process. It is prone to generate high residual stresses due to non-volumetric changes during heating and cooling cycle. These residual stresses ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of Closed Loop Power Recirculating Type Test Rig - Higher Torque Ranges

    N, Gopi Kannan / Rajaraman, Manikandan / Muthu kumar, Pandurangan et al. | SAE Technical Papers | 2021
    controlling of pre-set temperature of oil during testing with heating and cooling arrangement, mechanical fail safe device, back-to-back gear pair ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure modes and effects analysis , Test equipment and instrumentation

    Coupled CFD Simulation of Brake Duty Cycle for Brake System Design

    Chaudhary, Alok Subhash / Ghodake, Preetam / khewale, Swapnil | SAE Technical Papers | 2021
    complex 3D flow physics and heat dissipation from rotors in the vicinity of brake system. Deployment of brake thermal simulations in initial ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical Investigation of Narrow-Band Noise Generation by Automotive Cooling Fans

    Weng, Chenyang / Yao, Huadong / Zackrisson, Linus et al. | SAE Technical Papers | 2020
    Axial cooling fans are commonly used in electric vehicles to cool batteries with high heating load. One drawback of the cooling fans is the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Simplified Approach to Model a HEV/PHEV/ Battery Vehicle Cooling System in 1D and Validating using DFSS Methodology

    Kumar, Amit / Autade, Dhananjay / J, Kamalakannan et al. | SAE Technical Papers | 2020
    completely new thermal management layout has to be designed. The time and cost spent on a real time model of new cooling system affect the vehicle ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    A DFSS Approach Study on the Effects of Vehicle Cabin Properties on HVAC System’s Cool Down Performance Using 1D Simulation

    Subramanian, Karthik / Govindarajalu, Murali / Danapalan, Prakashbabuji et al. | SAE Technical Papers | 2020
    cabin cooling and considering fact that going for increasing capacity of the system will contribute more to the global warming, there is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Enhancement of Heat Exchanger Performance Using Oscillating Flow

    Premchandra Tavorath, Adhithiya / Rajagopalan, Haripriya / Dhamangaonkar, Pradyumna et al. | SAE Technical Papers | 2020
    ANSYS Fluent k-epsilon model. The effect of change in the magnitude and frequency of oscillation on local Nusselt number has been computed. The ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development , Heating, ventilation, and air conditioning systems (HVAC)

    Improving Winter Fuel Economy by Using Weather Information

    Cosgrove, David / Hirabayashi, Hidekazu / Oshikiri, Rino | SAE Technical Papers | 2020
    When the air conditioning (A/C) is turned on, the intake air to the HVAC is cooled at the evaporator. This is not only used for cooling the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Heating, ventilation, and air conditioning systems (HVAC)

    Latest Options for Replacing HFC-134a Refrigerant in MACs

    Malvicino, Carloandrea / Chen, Jiangping / Hu, Jianxin et al. | SAE Technical Papers | 2020
    achieve lower refrigerant emissions and higher energy efficiency in cooling-only and cooling and heating (heat pump) applications; 3) progress in ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    Co-Simulation Methodology for PHEV Thermal System Development

    Biswas, Auvi / Lindquist, Craig / Khandaker, Masuma et al. | SAE Technical Papers | 2020
    associated with the interior Heating, Ventilation, and Air Conditioning (HVAC) cooling system. For proper sizing of the condenser, chiller etc., one ...
    Verlag: Society of Automotive Engineers , SAE International

    Electrical Heated Epoxy Tool for Rotational Moulding Application

    Patil, Amit S / Gandhi, Sorna Rajendran | SAE Technical Papers | 2020
    which has its own limitation on energy loss, the other means is by direct heating and cooling of mould by passing hot oil/water in the mould to ...
    Verlag: Society of Automotive Engineers , SAE International

    Heat Transfer Enhancement through Advanced Casting Technologies

    Strong, Jack / Denholm, Keith / Hoag, Kevin et al. | SAE Technical Papers | 2020
    constructed using electrical heating elements and careful measurement to quantify the impact of various designs in terms of heat flux rate and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Test equipment and instrumentation

    Development of a New Ejector Performance Map for Design of an Automotive Air Conditioning System

    Haider, Muhammad / Elbel, Stefan | SAE Technical Papers | 2020
    Ejector as a work recovery device offers potential for developing energy efficient heating and cooling systems based on vapor compression ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    Transient Simulation of Heat Exchangers with Phase Change Material

    Wolfe, Edward / Craig, Timothy / Xia, Yanping | SAE Technical Papers | 2020
    heating and cooling, and other Heating, Ventilation, and Air Conditioning (HVAC) and Power Train Cooling (PTC) peak load shaving applications.The ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimizing Battery Cooling System for a Range Extended Electric Truck

    Rizzoni, Giorgio / Arasu, Mukilan / Ahmed, Qadeer | SAE Technical Papers | 2019
    simulations serve as a first step for determining the specifications of a battery cooling system based on the duty cycle and interactions with the ...
    Verlag: Society of Automotive Engineers , SAE International

    Overview on Design of Electric Coolant Pump for Automotive Application

    Thangappapillai, Aravind Muthu Suthan / Murali, Girish / Sureshkumar, Jayanthamani et al. | SAE Technical Papers | 2019
    components and other accessories such as cabin heating, battery cooling and electronic circuits cooling. Design process of electric coolant pump ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Propellers and rotors

    Evaluation of Equivalent Temperature in a Vehicle Cabin with a Numerical Thermal Manikin (Part 2): Evaluation of Thermal Environment and Equivalent Temperature in a Vehicle Cabin

    Matsumoto, Akira / Oi, Hajime / Suzuki, Seiko et al. | SAE Technical Papers | 2019
    cooling and heating conditions are also discussed. In the mesh-free simulation, even if there is a hole or an unnecessary shape on the CAD model ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Sun and solar

    Evaluation of Equivalent Temperature in a Vehicle Cabin with a Numerical Thermal Manikin (Part 1): Measurement of Equivalent Temperature in a Vehicle Cabin and Development of a Numerical Thermal Manikin

    Matsumoto, Akira / Takeo, Fusaaki / Oi, Hajime et al. | SAE Technical Papers | 2019
    cooling condition with solar radiation and a winter heating condition without solar radiation. The results showed that teq, including the effects ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sun and solar

    Impregnation of Lightweight Aggregate Particles with Phase Change Material for Its Use in Asphalt Mixtures

    Kakar, Muhammad Rafiq / Refaa, Zakariaa / Worlitschek, Jörg et al. | Springer Verlag | 2019
    to their ability of passive heating and cooling, thus regulating indoor temperature. Recently, PCMs have been studied also as additives of ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Characterization and Evaluation of Materials

    Study of Thermoacoustic Engine for Automotive Exhaust Waste Heat Recovery

    Zhou, Jianhua / Abom, Mats / Karlsson, Mikael | SAE Technical Papers | 2019
    . This includes packaging, physical boundary conditions as heating and cooling available, but also system perspectives as influence of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Transmission Breather Evaluation

    Patel, Hiral / Bhosale, Vikas / Tendulkar, Vishveshvar et al. | SAE Technical Papers | 2019
    breathe air when the air inside transmission expands or contracts due to heating and cooling of lubricating oil during vehicle running. Breather ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Seals and gaskets

    Optimization of modular district heating system for selected public buildings and neighborhoods in Visoko with mechanical structure optimization of solar collector holders — The CoolHeating project

    Petrovic, Marin / Babic, Amra / Fejzovic, Emir | IEEE | 2018
    Small modular district heating/cooling grids can be fed by different heat sources, including from solar collectors, biomass systems and ...

    Development of Parallel and Direct Cooling System for EV/FCEV Inverter

    Shin, Dongmin / Seo, Heung Seok | SAE Technical Papers | 2018
    output EV/FCEV. The direct cooling system of a conventional inverter is designed to supply coolant along the direction in which the heating ...
    Verlag: Society of Automotive Engineers , SAE International

    Design and Development of Cooling System for a Formula SAE Race Car

    Mishra, Aagosh / Kumar, Akshyt Bimal / B, Ashok et al. | SAE Technical Papers | 2018
    heating problems. Maximum efficiency from a combustion vehicle can only be achieved when the cooling system is designed to handle the increasing ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Data acquisition and handling

    Engine oil Thermal Management: Oil Sump Volume Modification and Heating by Exhaust Heat During ICE Warm Up

    Di Battista, Davide / Fatigati, Fabio / Cipollone, Roberto | SAE Technical Papers | 2018
    improvement – but also on a positive interaction with the cooling fluid thermal dynamics. The lower thermal capacity of the circulating oil (with ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Starters and starting

    Effectiveness of Vehicle Cool Glove Box and Analysis of Parameters Effecting Cool Glove Box Performance

    Lingampelly, Rajaprasad / Janampally, Sandeep Kumar Reddy / Sonti, Vijay Bhaskar | SAE Technical Papers | 2018
    affects the performance are studied. The Glove Box with cooling feature located on bottom of instrumental panel with good sealing and having high ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Seals and gaskets , Heating, ventilation, and air conditioning systems (HVAC)

    HVAC System Bench Test Analysis for TXV Tuning

    Khawaja, Aamir / Valencia, Manuel / Sambandan, Saravanan et al. | SAE Technical Papers | 2018
    cooling, warm up and maintaining the air quality of the cabin during all-weather conditions. In HVAC system, TXV plays vital role by separating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Cooling , Tools and equipment , Heating, ventilation, and air conditioning systems (HVAC)

    Worldwide Electrical Energy Consumption of Various HVAC Systems in BEVs and Their Thermal Management and Assessment

    Koehler, Juergen / Westerloh, Malte / Twenhövel, Sven et al. | SAE Technical Papers | 2018
    for heating and cooling is estimated at city, country, continent and world level.This study also deals with the optimization of mobile air ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sun and solar