1–17 von 17 Ergebnissen
|

    Microstructural characteristics on the surface and subsurface of semimetallic automotive friction materials during braking process

    Talib, R.J. / Muchtar, A. / Azhari, C.H. | Tema Archiv | 2003
    In this study, a series of friction tests on semimetallic automotive friction materials were conducted on a friction test machine by ...

    Effects of temperature on yield locus for 5083 aluminum alloy sheet

    Naka, T. / Nakayama, Y. / Uemori, T. et al. | Tema Archiv | 2003
    Warm press forming of aluminum alloy sheets is quite attractive, since undesirable stretcher strain marks, which often appear on the ...

    Influences of the geometrical conditions of die and workpiece on the barreling formation during forging-extrusion process

    Lin, S.Y. / Lin, F.C. | Tema Archiv | 2003
    The main concern of this study is to investigate the material flow characteristics of solid cylinder upsetting with a hollow die subjected ...

    After Concorde, Materials for the Next SST

    Barbaux, Y. / Guedra-Degeorges, D. / Octor, H. et al. | British Library Conference Proceedings | 1995

    Textile Processes for the Manufacture of Composite Materials

    Crothers, P. / Kruckenberg, T. / Herszberg, I. et al. | British Library Conference Proceedings | 1995

    The Effect on Mechanical Properties of Void Formation During Vacuum Bag Processing of Epoxy Film Adhesives

    Arnott, D. / Pearce, P. / Wilson, A. et al. | British Library Conference Proceedings | 1995

    Rapid debinding of 316L stainless steel injection moulded component

    Omar, M.A. / Ibrahim, R. / Sidik, M.I. et al. | Tema Archiv | 2003
    remove the remaining binder. The results show that no swelling or distortion was observed on the moulded specimens on both binder systems ...

    Applying liquid film protection method to solid-state bonding process of AA7075 aluminum alloys

    Wu, Ye-Ee / Lo, Yu-Lin | Tema Archiv | 2003
    increase with deformation. Experimental results also show that fine grains possessed by superplastic materials do increase the bonding strength and ...

    Gate location design in injection molding of an automobile junction box with integral hinges

    Kim, H.S. / Son, J.S. / Im, Y.T. | Tema Archiv | 2003
    by investigating resin flow patterns depending on several gate positions obtained by numerical analyses of a simple strip with a hinge. The ...

    Determination of forming limit of a structural aluminum tube in rubber pad bending

    Lee, J.W. / Kwon, H.C. / Rhee, M.H. et al. | Tema Archiv | 2003
    process parameters such as the material property of rubber and roller diameter, finite element (FE) analyses were also conducted. The ratio of the ...

    Mechanical properties study and design of a suspension system by considering tension force

    Moon, Byung-Young / Kawabata, Showa / Chung, Sung-Won | Tema Archiv | 2003
    Schlagwörter: poröser Werkstoff

    A comparative estimation of the forming load in the deep drawing process

    Fereshteh-Saniee, F. / Montazeran, M.H. | Tema Archiv | 2003
    (FE) method. In these simulations, the effects of the element type on the forming bad and the variation of the thickness strain were studied ...

    Application of numerical simulation for wear analysis of warm forging die

    Lee, R.S. / Jou, J.L. | Tema Archiv | 2003
    -isothermal ring compression test was adopted to estimate the friction coefficient in different temperatures and the on-line temperature recording ...

    Performance evaluation of pure CBN tools for machining of steel

    Neo, K.S. / Rahman, M. / Li, X.P. et al. | Tema Archiv | 2003
    ideal cutting tool material but recently binderless CBN or pure CBN (PCBN) with superior mechanical properties has been developed by Sumitomo ...

    Analytical model for prediction of deformed shape in three-roll rolling process

    Min, J.H. / Kwon, H.C. / Lee, Y. et al. | Tema Archiv | 2003
    further applied to a three-roll process with four-passes sequence. The final workpiece geometry predicted based on the model developed was found ...

    Axial crush of hollow cylindrical structures with various polygonal cross-sections numerical simulation and experiment

    Yamashita, M. / Gotoh, M. / Sawairi, Y. | Tema Archiv | 2003
    compression using the FEM program code of the public domain version of DYNA3D. The effects of wall thickness and plastic hardening rate of material on ...

    Tool design for the tubular press forming of a rear suspension member with the finite element analysis

    Kim, Se-Ho | Tema Archiv | 2007
    Tool design is carried out for a press forming of a tubular axle in the rear suspension assembly based on the result of the finite element ...