1–20 von 22 Ergebnissen
|

    FITTING, TEE, FLARED TUBE, INTERNAL THREAD ON SIDE, FOR SEAL RING

    SAE Technical Papers | 2015
    AC7112, AC7112/2. ADDED “FITTING” TO THE TITLE BLOCK. ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING, TEE, FLARED TUBE, INTERNAL THREAD ON RUN, FOR SEAL RING

    SAE Technical Papers | 2015
    AC7112, AC7112/2. ADDED “FITTING” TO TITLE BLOCK. ...
    Verlag: Society of Automotive Engineers , SAE International

    Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use—Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

    SAE Technical Papers | 2010
    carbon and steel alloy tube conductor assemblies for hydraulic fluid power applications made from both standard and non-standard metallic tubing ...
    Verlag: Society of Automotive Engineers , SAE International

    Copper-Nickel-Tin Alloy, Mechanical Tube 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX02, formerly TX00)

    SAE Technical Papers | 2022
    This specification covers a copper-nickel-tin alloy in the form of mechanical tube 1.100 to 13.6 inches (28 to 346 mm) in outer diameter ...
    Verlag: Society of Automotive Engineers , SAE International

    Design of Tubing Installations for Aerospace Hydraulic Systems

    SAE Technical Papers | 2016
    This document provides recommended practices for the design and selection of tube, hose, and fitting systems that are used to transmit ...
    Verlag: Society of Automotive Engineers , SAE International

    Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements

    SAE Technical Papers | 2013
    the user community. In addition, the document title has been revised to include steel tube materials that have been recently added as SAE ...
    Verlag: Society of Automotive Engineers , SAE International

    Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication

    SAE Technical Papers | 2013
    community. In addition, the document title has been revised to include steel tube materials that have been recently added to SAE standards. ...
    Verlag: Society of Automotive Engineers , SAE International

    Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement

    SAE Technical Papers | 2013
    addition, the document title has been revised to include steel tube materials that have been recently added as SAE standards. ...
    Verlag: Society of Automotive Engineers , SAE International

    Beaded Ends for Hose Connections and Hose Fittings

    SAE Technical Papers | 2021
    J1231 to correct the following: Document title revised from “Formed Tube Ends for Hose Connection and Hose Fittings.” Made appropriate ...
    Verlag: Society of Automotive Engineers , SAE International

    Measurement of Low Concentration NH3 in Diesel Exhaust using Tunable Diode Laser Adsorption Spectroscopy (TDLAS)

    Sauer, Claudia / Mackay, Gervase / Pisano, John T. et al. | SAE Technical Papers | 2009
    ppmV set forth in California Code of Regulations (CCR), Title 13, Section 2706 (b) (3).Injection recovery tests were used to characterize ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, ADAPTER, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2013
    AS4296 /11/ THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN. /12/ SIZE ONLY. REF - THE O'RING IS NOT PART OF THE ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2008
    ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN. /12/ FOR JUMP SIZE FITTINGS, A TRANSITION DIAMETER WILL OCCUR IN THIS AREA. /13 ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI

    SAE Technical Papers | 2012
    ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN. /12/ FOR JUMP SIZE FITTINGS, A TRANSITION DIAMETER WILL OCCUR IN THIS AREA. /13 ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2007
    INTERPRETATION OF DRAWING PER ARP4296 /11/ THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN. /12/ .030 MIN RADIUS UNLESS ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2007
    INTERPRETATION OF DRAWING PER ARP4296 /11/ THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN. /12/ FOR JUMP SIZE FITTINGS ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2007
    OTHERWISE SPECIFIED 10 INTERPRETATION OF DRAWING PER ARP4296 / 11 / THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, ELBOW, 45 DEGREE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2012
    UNLESS OTHERWISE SPECIFIED 10 INTERPRETATION OF DRAWING PER ARP4296. /11/ THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2006
    BREAK ALL EDGES .003-.010 INCHES UNLESS OTHERWISE SPECIFIED 10 INTREPRETATION OF DRAWING PER AS4296 /11/ THIS DIMENSION IS THE ALLOWABLE TUBE ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, UNION, 3 HOLE FLANGE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2006
    OTHERWISE SPECIFIED 10 INTREPRETATION OF DRAWING PER AS4296 /11/ THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN ...
    Verlag: Society of Automotive Engineers , SAE International

    FITTING ASSEMBLY, ELBOW, 90 DEGREE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2012
    INTERPRETATION OF DRAWING PER ARP4296 /11/ THIS DIMENSION IS THE ALLOWABLE TUBE END POSITIONING FOR SYSTEM LAYOUT DESIGN. /12/ .030 MIN RADIUS UNLESS ...
    Verlag: Society of Automotive Engineers , SAE International