Synonyme wurden verwendet für: Abkühlen
Suche ohne Synonyme: keywords:(Abkühlen)

1–50 von 76 Ergebnissen
|

    Improvement on the heat dissipation of permanent magnet synchronous motor using heat pipe

    Wan, Zhenping / Sun, Bo / Wang, Xiaowu et al. | SAGE Publications | 2020
    Schlagwörter: heat dissipation

    Experimental investigation of the cooling characteristics of a monobloc cast iron brake disc with fingered hub

    Tirovic, Marko / Topouris, Stergios / Sherwood, Glenn | SAGE Publications | 2020
    Schlagwörter: convective cooling , heat dissipation

    Understanding and improving the convective cooling of brake discs with radial vanes

    Galindo-Lopez, C H / Tirovic, M | SAGE Publications | 2008
    Schlagwörter: convective heat dissipation

    Study on the effect of different combinations of engine coolant additives on the heat dissipation rate of radiators

    Sathyanarayanan, P L / Ramprabhu, R | SAGE Publications | 2005
    Schlagwörter: heat dissipation

    Experimental investigation on air-side flow-field and water-side heat exchange performance of radiator based on matrix fans

    Wang, Hongchao / Shan, Xizhuang / Yang, Zhigang | SAGE Publications | 2019
    Schlagwörter: cooling module , heat dissipation uniformity

    Maximising heat dissipation from ventilated wheel-hub-mounted railway brake discs

    Galindo-López, Carlos H / Tirović, Marko | SAGE Publications | 2013
    Schlagwörter: convective heat dissipation

    Experimental and numerical investigations of cooling drag

    Hobeika, Teddy / Sebben, Simone / Löfdahl, Lennart | SAGE Publications | 2017
    Schlagwörter: vehicle cooling , Cooling flow , Cooling drag

    Optimization investigation on the liquid cooling heat dissipation structure for the lithium-ion battery package in electric vehicles

    Xie, Jinhong / Zang, Mengyan / Wang, Shuangfeng et al. | SAGE Publications | 2017
    Schlagwörter: cooling plate , liquid cooling

    Convective heat dissipation from a wheel-hub-mounted railway brake disc

    Tirovic, M / Galindo-Lopez, C H | SAGE Publications | 2008
    Schlagwörter: convective heat dissipation

    Conjugate heat transfer study of backdisc cooling of a radial turbine

    Chao, MA / Kangbo, LU / Wenjiao, LI | SAGE Publications | 2021
    Schlagwörter: impingement cooling , Turbine cooling

    Improving turbine endwall cooling uniformity by controlling near-wall secondary flows

    Thomas, Mitra / Povey, Thomas | SAGE Publications | 2017
    Schlagwörter: Film cooling , turbine cooling

    Research on the flow field and film cooling effectiveness of the endwall with swirling film cooling

    Zhang, Jian / Zheng, Qun / Li, Zhaolin et al. | SAGE Publications | 2023
    Schlagwörter: film cooling , endwall cooling

    Effect of jet flow on cooling performance and thermal stress of a radial turbine back disc

    Ma, Chao / Su, Yilong / Zhu, Guangqian et al. | SAGE Publications | 2021
    Schlagwörter: impingement cooling , cooling efficiency

    Cooling structure design of gas turbine blade by using multi-level highly efficient design platform

    Zhao, Zhiqi / Luo, Lei / Li, Shouzuo et al. | SAGE Publications | 2021
    Schlagwörter: cooling element method , cooling structure

    Flow behaviour in vented brake discs with straight and airfoil-shaped radial vanes

    Bombek, Gorazd / Hribernik, Aleš | SAGE Publications | 2023
    Schlagwörter: cooling performance , forced convective cooling

    Modelling heat transfer and fluid flow in a ship engine room using CFD analysis to evaluate and improve ventilation

    Salmani, Amir / Hosseini, Seyed Farokh / Khani, Hasan | SAGE Publications | 2023
    Schlagwörter: heat removal performance

    Theoretical and experimental investigation of the aerodynamic drag due to automotive cooling systems

    Barnard, R. H. | SAGE Publications | 2000
    Schlagwörter: vehicle cooling system drag , vehicle cooling system design , Automotive cooling systems

    Performance cycle analysis of an open cooling cycle for a scramjet

    Qin, Jiang / Bao, Wen / Zhou, Weixing et al. | SAGE Publications | 2009
    Schlagwörter: open cooling cycle , regenerative cooling

    Research status of active cooling of endothermic hydrocarbon fueled scramjet engine

    Ning, Wang / Yu, Pan / Jin, Zhou | SAGE Publications | 2013
    Schlagwörter: Active cooling

    Showerhead film cooling injection orientation design on the turbine vane leading edge considering representative lean burn combustor outflow

    Wu, Zhuang / Zhu, Hui-ren / Liu, Cun-liang et al. | SAGE Publications | 2021
    Schlagwörter: film cooling

    Hydrogen-fueled scramjet cooling system investigation using combustor and regenerative cooling coupled model

    Bao, Wen / Duan, Yanjuan / Zhou, Weixing et al. | SAGE Publications | 2014
    Schlagwörter: cooling system

    Experimental study on the effect of different components collocations on flow of automotive cooling fan

    Wen, Suping / Hao, Yuwei / Zhang, Zhixuan et al. | SAGE Publications | 2020
    Schlagwörter: Automotive cooling fan

    Review of engine cooling technologies for modern engines

    Pang, H H / Brace, C J | SAGE Publications | 2004
    Schlagwörter: engine cooling

    Experimental study on the effect of the shroud on the performance and flow field of an automotive cooling fan

    Hu, X / Wen, S / Gao, Y et al. | SAGE Publications | 2011
    Schlagwörter: automotive cooling fan

    Modelling and simulation methodology of channel cooling using hydrocarbon fuel as coolant under supercritical pressures

    Bao, W / Li, X-L / Qin, J et al. | SAGE Publications | 2011
    Schlagwörter: cooling

    A review of evaporative cooling system concepts for engine thermal management in motor vehicles

    Jafari, Soheil / Dunne, Julian F / Langari, Mostafa et al. | SAGE Publications | 2017
    Schlagwörter: engine cooling

    Analytical study of stationary temperature field in transpiration cooled porous wall

    Zhukov, Victor P / Haidn, Oskar J | SAGE Publications | 2013
    Schlagwörter: Transpiration cooling

    Cooling system improvements — assessing the effects on emissions and fuel economy

    Brace, C J / Hawley, G / Akehurst, S et al. | SAGE Publications | 2008
    Schlagwörter: cooling systems

    Irreversible cycle analysis of a re-cooled cycle for a scramjet

    Qin, J / Zhou, W X / Bao, W et al. | SAGE Publications | 2010
    Schlagwörter: cooling

    A test rig for investigations of gas turbine combustor cooling concepts under realistic operating conditions

    Behrendt, T / Hassa, Ch | SAGE Publications | 2008
    Schlagwörter: combustor cooling

    A numerical study on knock combustion suppression using targeted fuel injection in an SI engine

    Meng, Shuo / Han, Zhiyu / Wu, Zhenkuo | SAGE Publications | 2024
    Schlagwörter: charge cooling

    Three-dimensional coupled thermo-mechanical analysis for fatigue failure of a heavy vehicle brake disk: Simulation of braking and cooling phases

    Rouhi Moghanlou, Mohammad / Saeidi Googarchin, Hamed | SAGE Publications | 2020
    Schlagwörter: Braking and cooling phases

    Interaction mechanism between shock waves and supersonic film cooling with cracking reaction

    Zuo, Jingying / Zhang, Silong / Qin, Jiang et al. | SAGE Publications | 2020
    Schlagwörter: Supersonic film cooling

    Optimal HEV cooling system design through a computer-aided virtual development chain

    Baysset, Guillaume / Chessé, Pascal / Chalet, David et al. | SAGE Publications | 2023
    Schlagwörter: cooling system architectures

    Mathematical modeling of transpiration cooling in cylindrical domain

    Aybar, Hikmet Ş / Faridani, Mehdi M | SAGE Publications | 2015
    Schlagwörter: Transpiration cooling

    Numerical study of liquefied natural gas as a coolant in liquid rocket engines

    Urbano, Annafederica / Nasuti, Francesco | SAGE Publications | 2013
    Schlagwörter: cooling channel

    Piston temperature model oriented to control applications in diesel engines

    Cho, Hoon / van Nieuwstadt, Michiel | SAGE Publications | 2018
    Schlagwörter: piston cooling jet

    The impact of inlet flow conditions on the aerodynamic performance of an NACA submerged intake for ground vehicle applications

    Holt, Jenny C / Garry, Kevin P | SAGE Publications | 2013
    Schlagwörter: automotive cooling

    Performance improvement of a high pressure ratio centrifugal compressor by integrated cooling

    Mostafa Moosania, Seyed / Zheng, Xinqian | SAGE Publications | 2016
    Schlagwörter: integrated cooling

    Noise reduction of automobile cooling fan based on bio-inspired design

    Wang, Shuwen / Yu, Xinke / Shen, Lixia et al. | SAGE Publications | 2021
    Schlagwörter: Automobile cooling fan

    Optimisation of a 180° U-shaped bend shape for a turbine blade cooling passage leading to a pressure loss coefficient of approximately 0.6

    Namgoong, Howoong / Ireland, Peter / Son, Changmin | SAGE Publications | 2016
    Schlagwörter: turbine cooling passage

    A thermal analysis of a new railway brake concept using liquid cooling

    Cartigny, F / Dufrénoy, P / Desmet, B | SAGE Publications | 2004
    Schlagwörter: liquid cooling

    Thermal imaging as flow visualization for gas-turbine film cooling

    Sangan, C M / Zhou, K / Litherland, K et al. | SAGE Publications | 2011
    Schlagwörter: turbine cooling

    Evaluation of the Thermofluid Performance of an Automotive Engine Cooling-Fan System Motor

    Savory, E / Martinuzzi, R J / Ryval, J et al. | SAGE Publications | 2011
    Schlagwörter: electric motor cooling

    A computational study of leading-edge wall cooling effect on shock wave–boundary layer interaction in forward-facing step

    P, Vinoth Kumar / Murugan, Jayaprakash N | SAGE Publications | 2023
    Schlagwörter: leading-edge wall cooling

    A numerical prediction and potential control of typical icing process on automobile windshield under nocturnal radiative cooling and subfreezing conditions

    Du, Xuzhi / Yang, Zhigang / Jin, Zheyan et al. | SAGE Publications | 2020
    Schlagwörter: Nocturnal radiative cooling

    Application of conjugate heat transfer and fluid network analysis to improvement design of turbine blade with integrated cooling structures

    Peigang, Yan / Ying, Cui / Liang, Shi et al. | SAGE Publications | 2014
    Schlagwörter: integrated cooling structure