1–20 von 284 Ergebnissen
|

    Adapted Mechanical Properties for Improved Formability of Aluminum Blanks by Local Induction Heating

    Geiger, Manfred / Merklein, Marion / Kerausch, Michael | SAE Technical Papers | 2003
    the conversion from the stable naturally aged condition T4 to reversible solution heat-treated conditions of AA6016 as function of temperature ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Advanced Design of Induction Processes and Work Coils for Heat Treating and Assembly in Automotive Industry

    Goldstein, Robert C. / Ruffini, Robert S. / Ruffini, Robert T. et al. | SAE Technical Papers | 1999
    Induction is widely used for heat treating, bonding, brazing and other operations in the automotive industry. Modern high frequency power ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

    SAE Technical Papers | 2016
    requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii). After publication of AS36100A [2006 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

    SAE Technical Papers | 2020
    requirements of Title 14 CFR Part 25, except for the 9.0-g forward ultimate inertia force of § 25.561 (b)(3)(ii). After publication of AS36100B ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Air Cargo Unit Load Devices – Performance Requirements and Test Parameters

    SAE Technical Papers | 2011
    and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

    SAE Technical Papers | 2005
    and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0 g forward ultimate inertia force of § 25.561 (b)(3)(ii). ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Alcoa - Massena Operations: An Integrated Aluminum Aerospace Forging Stock Producer

    Hohman, David W. | SAE Technical Papers | 1991
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings, Rings or Heading 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05La - 0.20N (HS-556) Solution Heat Treated

    SAE Technical Papers | 2023
    This specification covers a corrosion- and heat-resistant alloy in the form of bars, forgings, flash-welded rings, and stock for forging ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Rings and Stock for Forgings, Rings and Heading 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated

    SAE Technical Papers | 2023
    This specification covers a corrosion- and heat-resistant iron-chromium-nickel-cobalt alloy in the form of bars, wire, forgings, flash ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Alloy Selection for Headers of CAB Brazed Aluminum Radiators

    Garcia, Jose / Le Gauyer, Philippe | SAE Technical Papers | 1997
    , with or without post-braze heat treatment. The results from those tests have helped to evaluate the influence of various material ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminium Piston Alloy to Retard Age Softening Characteristics in Motorcycle Engines

    Jayamathy, M. / Vasanth, R. | SAE Technical Papers | 2006
    a piston material. Due to design constraints in engines for heat dissipation and engine temperatures upto 300 ° C, the need for the study on ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O) Annealed, Fine Grain

    SAE Technical Papers | 2019
    , alclad. AMS4274B prohibits unauthorized exceptions (3.6), revises Title to correct temper designation, Condition (3.2), Properties (3.3.3 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated, or when specified, Annealed (7075-O)

    SAE Technical Papers | 2012
    shall be supplied in the annealed (O) condition. AMS4186D adds coverage for O temper (Title, 3.2), and adds tensile properties for annealed ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated

    SAE Technical Papers | 2012
    . AMS4122L adds coverage for T651 temper (Title, 3.2.1) to facilitate future cancellation of AMS-QQ-A-225/9. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T7) Solution and Precipitation Heat Treated

    SAE Technical Papers | 2015
    Limited Scope Ballot to revise the Title and Heat Treatment (3.4). ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged

    SAE Technical Papers | 2018
    of any size (see 8.6). AMS4134G introduces Exceptions (3.6), revises Title, Condition (3.2.1), Properties (3.3.1.3), and Reports (4.4), and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked

    SAE Technical Papers | 2019
    (1.1.1). Additionally, it prohibits unauthorized exceptions (3.6) and revises title, condition (3.2), properties (3.3.2), quality (3.4.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3511) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Straightened

    SAE Technical Papers | 2019
    (1.1.1). Additionally, it prohibits unauthorized exceptions (3.6) and revises title, condition (3.2), properties (3.3.2), quality (3.4.1.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7451) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

    SAE Technical Papers | 2015
    ). AMS4205D revises Title, Tensile Properties (3.3.1.1), Fracture Toughness (3.3.3, Tables 3A and 3B) Quality (Table 4), Acceptance Tests (4.2.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged

    SAE Technical Papers | 2012
    temper (Title, 3.2.1, 3.2.2) to facilitate cancellation of AMS-QQ-A-225/9. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment