1–13 von 13 Ergebnissen
|

    Chemical depth profiling of multi-layer automotive coating systems

    Adamsons, K. | Tema Archiv | 2002
    Detailed chemical analysis of high performance automotive coating systems can be done with a relatively available and affordable set of ...

    Analysis of wear debris in rolling contact fatigue cracks of pearlitic railway wheels

    Cvetkovski, K. / Ahlström, J. / Norell, M. et al. | Tema Archiv | 2014
    concentration of oxygen was measured in between flakes, indicating the presence of oxides and flakes being of similar chemical composition as the base ...

    Model-based design of an automotive-scale, metal hydride hydrogen storage system

    Johnson, Terry A. / Kanouff, Michael P. / Dedrick, Daniel E. et al. | Tema Archiv | 2012
    -dimensional models of coupled fluid dynamics and heat transfer. Chemical kinetics models were coupled with both heat and mass transfer calculations to ...

    On-board and off-board performance of hydrogen storage options for light-duty vehicles

    Ahluwalia, R.K. / Hua, T.Q. / Peng, J.K. | Tema Archiv | 2012
    hydrolysis of sodium borohydride presents difficult chemical, thermal and water management issues, and regenerating NaBH4 by converting B ...

    A new rotary tribometer to study the wear of reinforced rubber materials

    Mane, Z. / Loubet, J.L. / Guerret, C. et al. | Tema Archiv | 2013
    A rotary tribometer has been developed in order to reproduce abrasion wear at the interface between the reinforced rubber material of a ...

    The effects of weathering on the mechanical performance of automotive paint systems

    Nichols, M.E. / Gerlock, J.L. / Smith, C.A. et al. | Tema Archiv | 1999
    advances in assessing the durability of coatings by measuring weathering-induced chemical composition changes have greatly increased our ability to ...

    Airbag for the closing of pipelines on explosions and leakages

    Eisenreich, N. / Neutz, J. / Seiler, F. et al. | Tema Archiv | 2007
    , capable of withstanding up to 10 bar pressure. The choice of material was critical to ensure sufficient strength and chemical resistance while ...

    Fitness for service of welded components under creep and creepfatigue loading

    Dogan, Bilal | Tema Archiv | 2010
    generation and chemical processing industrial applications since couple of decades. ...

    Experimental analysis and wear modeling for mechanical components of a typical rail launcher

    Akkök, Metin / Acar, Bülent / Acmaz, Emre | Tema Archiv | 2013
    One of the most important design considerations for rocket launchers is its maintainability and one of the most important parameter which ...

    Potential use of transport and dispersion model output to supplement allied tactical publication-45 hazard area prediction templates

    Platt, Nathan / Jones, Leo | Tema Archiv | 2012
    Allied Tactical Publication-45(C) is the current US and NATO command doctrine for Nuclear, Chemical and Biological (NBC) events. ATP-45 is ...

    Wear effects and mechanisms of soot-contaminated automotive lubricants

    Green, D.A. / Lewis, R. / Dwyer-Joyce, R.S. | Tema Archiv | 2006
    engine valve train contact. Previous research on this topic has been mainly performed from a chemical point of view in fundamental studies, with ...

    Interactions between basecoats and clearcoats in car refinish systems

    Ven, Leo G.J. van der / Leijzer, Rene T.M. / Berg, Keimpe J. van den et al. | Tema Archiv | 2007
    means of chemical and physical techniques. The effect of a medium solid clearcoat, a VOC compliant polyurethane clearcoat and UV-clearcoat on ...

    Ambient cure high solids acrylic resins for automotive refinish clear coat applications

    Petit, H. / Henry, N. / Krebs, A. et al. | Tema Archiv | 2001
    fast at ambient temperature in order to reduce the investment in drying equipment and the time of repair. However, matching the stringent ...