1–20 von 29 Ergebnissen
|

    Impact of Hydrothermal and Chemical Aging on SCR Storage Characteristics and NOx Reduction Performance in an Ultra-Low NOx System

    Vernham, Bruce / Desai, Chintan / Sharp, Christopher et al. | SAE Technical Papers | 2023
    . Upon chemical aging further deterioration of low temperature performance was observed. This aging phenomenon impacts the dosing control ...
    Verlag: Society of Automotive Engineers , SAE International

    Real-Time Simulation of CNG Engine and After-Treatment System Cold Start Part 1: Transient Engine-Out Emission Prediction Using a Stochastic Reactor Model

    Mauss, Fabian / Rottengruber, Hermann / Oder, Johannes et al. | SAE Technical Papers | 2023
    and tabulated chemistry. The tabulated chemistry approach allows to account for the physical and chemical properties of natural gas fuels in ...
    Verlag: Society of Automotive Engineers , SAE International

    Research on Surface Treatment Coating on Titanium Alloy Based on Laser Cladding Technology

    al Muin, Abdullah / Chand, Dharmahinder Singh / Malhi, Gurmail Singh et al. | SAE Technical Papers | 2023
    material powder is good self-fluxing, has high-temperature resistance, and is analytically pure with 200 mesh. The chemical properties of Ni ...
    Verlag: Society of Automotive Engineers , SAE International

    Effects of Ignition Timing and Fuel Chemical Composition on Autoignition Behavior and Knocking Characteristics under Lean Conditions

    Iijima, Akira / Shirane, Kaede / Furusyo, Karin et al. | SAE Technical Papers | 2022
    visualized combustion images and frequency analysis of the in-cylinder pressure waveform. In addition, chemical kinetic simulations were used to ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of Transaxle Fluid for Electrification Vehicles: Design of Novel Additive Formulation

    Tada, Akira / Tokozakura, Daisuke / Aizawa, Kouki et al. | SAE Technical Papers | 2022
    issues, we made improvements on the additive formulation of fluid, such as the addition of an oil-film-forming polymer, chemical structure change ...
    Verlag: Society of Automotive Engineers , SAE International

    Modeling and Optimization of Process Variables in Turning of Inconel 617 through Criteria Importance through Inter-Criteria and Weighted Aggregated Sum Product Assessment Methodology

    Sundararajan, Devendiran | SAE Technical Papers | 2022
    Inconel 617 is found in industrial sectors, including chemical, petrochemical, and nuclear. This work mainly concentrates on the analysis ...
    Verlag: Society of Automotive Engineers , SAE International

    Experimental and Analytical Study of Temperature Swing Piston Coatings in a Medium-Duty Diesel Engine

    Babu, Aravindh / Koutsakis, Georgios / Andrie, Michael et al. | SAE Technical Papers | 2022
    model is coupled to the 1-D engine simulation software GT-POWER and predictions of wall temperature, heat transfer and chemical heat release ...
    Verlag: Society of Automotive Engineers , SAE International

    Identifying Key Aspects of Thermal Runaway Modelling for Lithium-ion Battery Cells

    Garcia, Antonio / Monsalve-Serrano, Javier / Sari, Rafael et al. | SAE Technical Papers | 2022
    problems with degradation or even unchain chemical reactions that can end in thermal runaway, one of the most worrying failure modes attaining ...
    Verlag: Society of Automotive Engineers , SAE International

    CFD Modeling of Reacting Diesel Sprays with Primary Reference Fuel

    D'Errico, Gianluca / Garcia-Oliver, Jose M / Zhou, Qiyan et al. | SAE Technical Papers | 2021
    , including facilitating the exploration of operation conditions and casting light on the involved physical and chemical phenomena. As more attention ...
    Verlag: Society of Automotive Engineers , SAE International

    Model Based Design, Simulation and Experimental Validation of SCR Efficiency Model

    Reddi, Ashok / Sharma, Prashant / Dekate, Rohan et al. | SAE Technical Papers | 2021
    out of which most are experimentally verified only in flow reactors with simulated gaseous concentration and standard test conditions. But in ...
    Verlag: Society of Automotive Engineers , SAE International

    Performance Comparison of LPG and Gasoline in an Engine Configured for EGR-Loop Catalytic Reforming

    Hawa, Hani / Szybist, James / Pihl, Josh et al. | SAE Technical Papers | 2021
    recuperation (TCR), a form of waste heat recovery where waste heat is converted to usable chemical energy. In doing so, the EGR dilution limit was ...
    Verlag: Society of Automotive Engineers , SAE International

    Graphene Coating as a Corrosion Protection Barrier for Metallic Terminals in Automotive Environments

    Arfaei, Babak / Zhang, Suki Naifang / Chen, Zhihong | SAE Technical Papers | 2021
    of metallic terminals. In this work, effects of thin graphene layers grown by plasma-enhanced chemical vapor deposition (PECVD) on Au and Ag ...
    Verlag: Society of Automotive Engineers , SAE International

    Tanker Truck Rollover Avoidance Using Learning Reference Governor

    Girard, Anouck / Rizzo, Denise / Kolmanovsky, Ilya et al. | SAE Technical Papers | 2021
    Tanker trucks are commonly used for transporting liquid material including chemical and petroleum products. On the one hand, tanker trucks ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Center of gravity (CG)

    COVID Killing Air Purifier Based on UV & Titanium Dioxide Based Photocatalysis System

    Mathur, Gursaran | SAE Technical Papers | 2021
    -lived, uncharged forms of hydroxide ions (OH−). These small, agile hydroxyl radicals then attack bigger organic (carbon-based like virus ...
    Verlag: Society of Automotive Engineers , SAE International

    Improving Battery Pack Safety with an Innovative Fluid for Thermal Management

    Champagne, Nicolas | SAE Technical Papers | 2021
    Efficient and safe Lithium-Ion Batteries have undoubtedly become the Holy Grail of the electric vehicle industry. Any OEM’s technical ...
    Verlag: Society of Automotive Engineers , SAE International

    Fuel Effects on Engine-out Emissions Part 2 - Fuel Properties Correlations

    Voice, Alexander / Fatouraie, Mohammad / Singh, Ripudaman et al. | SAE Technical Papers | 2021
    Particulate matter emissions from internal combustion engines have become an increasingly important area of focus for development teams in ...
    Verlag: Society of Automotive Engineers , SAE International

    Advanced Combustion Modelling of High BMEP Engines under Water Injection Conditions with Chemical Correlations Generated with Detailed Kinetics and Machine Learning Algorithms

    Forte, Claudio / Bianchi, Gian Marco / Pulga, Leonardo et al. | SAE Technical Papers | 2020
    thermodynamic effects of water injection but also the chemical kinetics aspects related to the mixture water dilution whose prediction is mandatory for ...
    Verlag: Society of Automotive Engineers , SAE International

    Assessing Thermomechanical Fatigue of a Cast Aluminum Alloy Cylinder Head of an Internal Combustion Engine

    Chen, Jim / Singh, Kanwerdip / Zhang, Lin et al. | SAE Technical Papers | 2020
    the chemical composition of the alloy and the kinetics of oxidation of each element in the alloy. FEA and TMF analysis facilitate optimized ...
    Verlag: Society of Automotive Engineers , SAE International

    Comparison of the Diffusive Flame Structure for Dodecane and OMEX Fuels for Conditions of Spray A of the ECN

    Micó, Carlos / Tejada, Francisco J. / Garcia-Oliver, Jose M et al. | SAE Technical Papers | 2020
    the start of injection (ASOI). Signal from both formaldehyde and OH chemical species can be compared, in order to analyze spatial distribution ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effects of EGR Composition on Combustion Performance and Efficiency

    Chadwell, Christopher / Randolph, Eric / Conway, Graham et al. | SAE Technical Papers | 2020
    -chemical properties of the in-cylinder charge should be considered as an increment in the development of the ICE engine for future efficiency ...
    Verlag: Society of Automotive Engineers , SAE International