1–20 von 204 Ergebnissen
|

    Heat Treatment Nickel Alloy and Cobalt Alloy Parts

    SAE Technical Papers | 2020
    This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or subcontractors, of parts made ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Development of energy efficient heat treatment processes for light weight automotive castings

    Kasprzak, W. / Sokolowski, J.H. / Yamagata, H. et al. | Tema Archiv | 2009
    Experimental results pertaining to the development of energy efficient heat treatment processes for vacuum High Pressure Die Casting (HPDC ...

    Application of air-hardening steels for highly stressed structural parts with simplified heat treatment

    Flaxa, Volker / Guettler, Jürgen / Rieth, Marcus et al. | Tema Archiv | 2014
    intermediate annealing. With a subsequent heat treatment, tensile strength levels higher than 800 MPa can be achieved. In this case, the components are ...
    Schlagwörter: Anlassen (Wärmebehandlung)

    New Carburising Techniques Using Fluidised Bed Furnace for In Line Heat Treatment in the Automotive Industry

    Reynoldson, R. / Killian, A. | British Library Conference Proceedings | 1997
    Schlagwörter: automotive engineering

    THE ROLE OF HEAT TREATMENT ON WEAR BEHAVIOR OF POWDER METALLURGY LOW ALLOY STEELS

    Khorsand, H. / Habibi, M. / Ashtari, M. et al. | British Library Conference Proceedings | 2002
    Schlagwörter: automotive applications , automotive components

    Heat treating SAE 5160 automotive leaf springs in a polymer quenchant

    Auchter, R. | Tema Archiv | 1998
    Oil has been traditionally used for quenching SAE 5160 automotive leaf springs. Advancements in quenching technology, primarily polymer ...
    Verlag: ASM International , Materials Park

    Surface treatment selections for automotive applications

    Vetter, Joerg / Barbezat, G. / Crummenauer, J. et al. | Tema Archiv | 2005
    PVD, PECVD, thermochemical heat treatment and thermal spraying. These new treatments are becoming more and more common in powertrain and ...

    Lightweight Design and Additive Manufacturing of a Fatigue-Critical Automotive Component

    Riva, Enrica / uriati, Federico / Nicoletto, Gianni | SAE Technical Papers | 2022
    fabrication in an industrial-grade L-PBF system using AlSi10Mg alloy powder followed by post fabrication heat treatment iv) production and fatigue ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Hemming of aluminum automotive sheet

    Mattei, L. / Daniel, D. / Guiglionda, G. et al. | Tema Archiv | 2008
    The need for weight reduction in the automotive industry has led to the development of aluminum alloys for body panels on a number of mass ...
    Schlagwörter: Wärmebehandlung (Materialbearbeitung)

    Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated

    SAE Technical Papers | 2022
    -Year Review and update of the specification. The revision updates the Title and document to better identify heat treatment, updates composition ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B (Rene 41) Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable

    SAE Technical Papers | 2023
    This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate. AMS5545H is the result of a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    High temperature agent gasification of microwave pyrolysed chars from automotive shredder residue

    Donaj, Pawel / Blasiak, Wlodzimierz / Yang, Weihong | Tema Archiv | 2010
    Presently, there is a growing need for handling Automobile Shredder Residues - ASR or 'car fluff'. One of the most promising methods of ...
    Schlagwörter: Automobil

    Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable

    SAE Technical Papers | 2022
    of the specification. The revision includes an update to the Title, Scope and Response to Heat Treatment (1.1, 3.3.4) to clarify the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat resistant alloys , Heat treatment

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated

    SAE Technical Papers | 2022
    This specification covers a corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable

    SAE Technical Papers | 2022
    of the specification. The revision updates the title, scope, and response to heat treatment (1.1, 3.3.3) to clarify the purchased material ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat resistant alloys , Heat treatment

    Effect of Solutionising on Change in Phase Morphology, Mechanical Behavior & Corrosion Behavior for AZ Series as Cast Automotive Magnesium Alloy Components

    Manwatkar, Asmita Ashok / Santosh Jambhale, Medha / Phale, Prasad Sitakant et al. | SAE Technical Papers | 2022
    by change in elemental composition and heat treatment. Analysis of composition and phase morphology are driving factors for determining ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Solution Heat Treated

    SAE Technical Papers | 2019
    This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Iron-Nickel-Chromium Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated

    SAE Technical Papers | 2022
    This specification covers a corrosion and heat-resistant iron-nickel-chromium alloy in the form of sheet, strip, and plate 0.010 to 2.00 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7451) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

    SAE Technical Papers | 2015
    ). AMS4205D revises Title, Tensile Properties (3.3.1.1), Fracture Toughness (3.3.3, Tables 3A and 3B) Quality (Table 4), Acceptance Tests (4.2.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, Rings and Stock for Rings and Forgings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat Treated

    SAE Technical Papers | 2022
    This specification covers a heat-resistant iron-nickel alloy in the form of bars, wire, forgings, flash welded rings. Product covered by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials