1–15 von 15 Ergebnissen
|

    Composite of CNT foam and phase change material: nano pore structure and the packing of phase change material

    Freier Zugriff
    SUN Wei / ZHOU Guoxiang | DOAJ | 2019
    Thermal energy is a very promising and widely existing energy source. However, the current heat storage method of phase change material not ...
    Verlag: Journal of Aeronautical Materials
    Schlagwörter: phase change material

    Electrothermal coupling model for lightning strike protection of composite materials

    Freier Zugriff
    LU Xiang / ZHAO Miao / SHAN Zezhong et al. | DOAJ | 2019
    lightning current waveform of 10/350 with peak value of 50 kA, the damage area of the composite reference is about 4 times of that the composite ...
    Verlag: Journal of Aeronautical Materials

    Effect of hot isostatic press and hot extrusion on microstructure of spray formed GH738 alloy

    Freier Zugriff
    WANG Yue / XU Wenyong / LIU Na et al. | DOAJ | 2019
    that the porosities in γ matrix of spray deposited billet are welded up to closure after HIP process. The difference of characteristic ...
    Verlag: Journal of Aeronautical Materials

    Prediction of acid salt spray corrosion experiment of 2024 aluminum alloy based on RBF neural network

    Freier Zugriff
    JIA Baohui / FANG Yibin / WANG Yiqiang | DOAJ | 2019
    With the increasingly serious industrial pollution, aircraft structural materials are inevitably exposed to acidic environment during the ...
    Verlag: Journal of Aeronautical Materials

    Effect of cyclic hygrothermal aging on interlaminar fracture toughness of T700/TDE86 carbon composite

    Freier Zugriff
    XU Kailong / LIU Lulu / ZHAO Zhenhua et al. | DOAJ | 2019
    the effects of different cyclic hygrothermal aging days on interlaminar fracture toughness of composites with open type (mode Ⅰ) and slip type ...
    Verlag: Journal of Aeronautical Materials

    Effect of deformation parameter on solution heat-treated microstructure of extruded Ni-based powder metallurgy superalloy

    Freier Zugriff
    CHEN Yang / TIAN Gaofeng / YANG Jie et al. | DOAJ | 2019
    The effect of forging temperature, strain rate and strain state on grain microstructure during solid solution heat treatment of extruded Ni ...
    Verlag: Journal of Aeronautical Materials

    Application of solid polymer electrolyte in lithium sulfur batteries

    Freier Zugriff
    WANG Chen / PENG Sikan / WANG Nan et al. | DOAJ | 2019
    that the electrode structure of microscopic polymer solid electrolyte coated active material is favorable for ion transfer. Macroscopically ...
    Verlag: Journal of Aeronautical Materials

    Research progress on the preparation of porous polymer derived ceramics

    Freier Zugriff
    TU Jianyong / MU Yangyang / XU Hailong et al. | DOAJ | 2019
    Polymer derived ceramics (PDCs) has been greatly developed over the past 40 years, due to its advantages of simple operation, low sintering ...
    Verlag: Journal of Aeronautical Materials

    Tensile anisotropy of the fourth generation single crystal superalloy at different temperatures

    Freier Zugriff
    SHI Zhenxue / LIU Shizhong / LI Jiarong | DOAJ | 2019
    solidified furnace. The tensile properties of the alloy with different orientations were investigated at 23 ℃, 800 ℃ and 980 ℃.The alloy ...
    Verlag: Journal of Aeronautical Materials

    Structure evolution and thermal conductivity of lanthanum zirconate coating after high temperature exposure

    Freier Zugriff
    WANG Yanfei / JIANG Di / WANG Siqing et al. | DOAJ | 2019
    La2Zr2O7 coatings were fabricated by air plasma spray technique. The effect of heat treatment time on the properties of ...
    Verlag: Journal of Aeronautical Materials

    Influences of hydrothermal aging on cracked metallic structure with composite patch

    Freier Zugriff
    WANG Yue / ZHAO Shuping / YANG Jun et al. | DOAJ | 2019
    of hydrothermal aging on mechanical property of cracked metallic structure with composite patch were assessed. The results show that the ...
    Verlag: Journal of Aeronautical Materials
    Schlagwörter: composite material

    Ultra-high frequency fatigue testing approach and verification of TA11 Ti-alloy based on electrodynamic shaker

    Freier Zugriff
    XU Wei / ZHAO Yanguang / ZHONG Bin et al. | DOAJ | 2019
    specimen of TA11 titanium alloy sheet was designed after FEM calculation. The actual testing frequency of the designed specimen could be reached as ...
    Verlag: Journal of Aeronautical Materials

    Effect of solid solution temperature on microstructure of Hf-containing K416B Ni-based superalloy with high W-content

    Freier Zugriff
    HOU Guichen / SU Haijun / XIE Jun et al. | DOAJ | 2019
    results of microstructure research indicate that the optimal solid-solution heat treatment process for the alloy is 1220 ℃ × 4 h. ...
    Verlag: Journal of Aeronautical Materials

    A novel high specific capacity hybrid cathode for lithium fluorocarbon battery

    Freier Zugriff
    PENG Sikan / WANG Chen / WANG Nan et al. | DOAJ | 2019
    A novel high specific capacity hybrid cathode material was designed by increasing the specific capacity of cathode material to improve the ...
    Verlag: Journal of Aeronautical Materials

    Preparation and properties of new poly (methylphenyl silylene aryl ether arylacetylene) resin

    Freier Zugriff
    NIU Qi / TANG Junkun / LI Chuan et al. | DOAJ | 2019
    A poly (methylphenyl silylene aryl ether arylacetylene) (PSEA-P2) resin was synthesized from 1, 4-bis (4’-ethynylphenoxy) benzene and ...
    Verlag: Journal of Aeronautical Materials