1–50 von 3,024 Ergebnissen
|

    Optimization of Cooling Air Flow for Improved Heat Dissipation through Radiator

    Aher, Amit / Palve, Chandrakant / Thakur, Paurnima et al. | SAE Technical Papers | 2024
    Engine cooling system, which will ensure optimum operating range of internal combustion engine through precise control on coolant flow rate by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Powertrain and Cabin Cooling Performance Improvement by Optimization of Its Components

    Mirajkar, Nilesh Shridhar / Khairnar, Rohit | SAE Technical Papers | 2024
    vehicle.Also, this paper covers the experiments conducted and their respective findings on optimization of cooling performance and methodology for same. ...
    Verlag: Society of Automotive Engineers , SAE International

    Design and Optimization of Air Intake and Cooling System for Commercial Fuel Cell Electric Vehicles

    Adsul, Aniket / Gadve, Dhananjay / Amancharla, Naga Chaithanya et al. | SAE Technical Papers | 2024
    information available in the public domain about fuel cell technology and its accessories.Air intake and cooling system’s right functioning is very ...
    Verlag: Society of Automotive Engineers , SAE International

    Flexible Heating and Heat Retention Technology for Efficient Treatment of Exhaust Gases in Diesel Engines

    YS, Ananthkumar / M, Jayashree / K, Sabareeswaran | SAE Technical Papers | 2024
    heating in the course of low load cycles and cold city rides for efficient gas conversion. As they are used to accelerate the light-off ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Environmental regulations and standards

    Study on Range Improvement Controls and Method for Electric Vehicles

    Pattalwar, Ashutosh / Verma, Mrinal / Bawa, Vikas et al. | SAE Technical Papers | 2024
    temperature under safe usable limits even during harsh conditions is critical. Simple reduction in energy consumption of electrical cooling/heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: On-board vehicle charging systems

    A Review on Fire Prevention and Suppression Solutions for EV Battery Packs

    G M, Bharath / P, Hari Prasad Reddy / H, Manjunatha et al. | SAE Technical Papers | 2024
    , passive heat dissipation using heat carrier pads, thermal insulating materials to prevent thermal propagation, safety vents to remove ejecta, and ...
    Verlag: Society of Automotive Engineers , SAE International

    Computational Study on the Influence of the Radiator in Vehicle Overall Performance

    Buscariolo, Filipe Fabian / Gonzales, José Fernando Paz / Alves, Julio Cesar Lelis | SAE Technical Papers | 2024
    One of the key components in engine cooling system design in internal combustion vehicles is the radiator, which is responsible not only ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Effect of Spot Weld Parameter on HAZ of Advanced High Strength Steel Joint

    Paliwal, Lokesh / Misal, Swapnali / Jain, Vikas | SAE Technical Papers | 2024
    hardening. However during heating and cooling cycle in resistance spot welding, martensite phase tempering affects hardness at Heat Affected Zone ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect Analysis of Form Factor on Thermo-Electric Generator Performance

    Ponangi, Babu Rao / Bali, Gaurav / Mutagi, Megha Dharnendra | SAE Technical Papers | 2024
    gases in IC engine-based vehicles and from batteries and fuel cell heating in green vehicles. This waste heat, also known as thermal energy, has ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effect of Different Air Path Based ATS Thermal Management Strategy on a Non- EGR Medium Duty Diesel Engine’s Performance and Emissions

    Sharma, Ajeet Kumar / Gupta, Ayush / Goyal, Dinesh et al. | SAE Technical Papers | 2024
    stringent and with the introduction of Real Drive Emission Test (RDE) and WHTC test comprising of both cold and hot phase, there is a need to ...
    Verlag: Society of Automotive Engineers , SAE International

    3-D Multiphase Flow Simulation of Coolant Filling and Deaeration Processes in an Engine Coolant System

    Maiti, Dipak / Saha, Rohit / Pasunurthi, Shyam Sundar et al. | SAE Technical Papers | 2024
    efficiency. However, it is expensive and time consuming to identify air entrapped locations in tests, decide on the filling strategy and make the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    A Real-World Range Testing and Analysis Methodology Development for Battery Electric Vehicles

    Rajakumar, K. / Omprasad, Karthick / B, Sakthivel et al. | SAE Technical Papers | 2024
    multiple drive modes and regen levels respectively. Also, other attributes such as AC On/Off condition, different loading condition i.e., Number of ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimization of Oil Quantity in Manual Transmission and Reducing Churning Loss

    Ks, Dhianeshwar / G R, Santosh / Ramaswamy, Sarathkumar et al. | SAE Technical Papers | 2024
    levels.Similarly, higher oil level creates higher churning losses, heating of the Gear oil and oxidation, reduction in efficiency and increased oil ...
    Verlag: Society of Automotive Engineers , SAE International

    Integrated Simulation Methodology to Predict Engine Head, Block, and Piston Temperatures

    Sahu, Abhay Kumar / Das, Debasis / Chakkamadathil, Shirdi | SAE Technical Papers | 2024
    , while cooling and lubrication surface boundary condition are mapped from 1D system simulation or experimental data. The heat transfer boundary ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling

    Cost Effective Techniques for SCEV to Improve Performance & Life of Battery and Motor by Using Efficient Thermal Systems

    Chormule, Suhas Rangrao | SAE Technical Papers | 2024
    systems for battery, motor, cabin and power electronics cooling & heating during various charging and discharge modes at different ambient ...
    Verlag: Society of Automotive Engineers , SAE International

    An Optimum Solution to Meet the Thermal Load Challenge in a High Mobility Military Vehicle

    Rao, Bonthala / Kiran, Nalavadath / AT, Shajahan | SAE Technical Papers | 2024
    challenging. With the adverse climatic condition and driving terrains, the criticality of Engine cooling system is intensified. In this paper, a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Military vehicles and equipment , Engine cooling systems

    Evaluation and simulation analysis of airport ground air conditioning operation effect

    Zhuge, Jingchang / Li, Shichao / Kang, Chunhua et al. | SPIE | 2024
    air conditioning to aircraft instead of aircraft APUs. In view of the poor cooling (heating) effect of aircraft ground air conditioning in ...

    A Study of Engine Oil Aeration in IC Engines and Factors Contributing It

    Kamboj, Jagdish / Attri, Mayank / Yadav, Vimal | SAE Technical Papers | 2024
    friction, cooling, supporting the load, and cleaning debris from the engine’s various moving components. Oil aeration refers to the phenomenon of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Test equipment and instrumentation

    Design and Development of E-axle as a Retro and OE Fitment Solution for Light Commercial Vehicles Ranging from 1.5 to 5 Ton GVW

    Vaibhav, Kumar / Mulik, Rakesh Vilasrao / Shrikrishna Ramdasi, Sushil | SAE Technical Papers | 2024
    . Though initially CAPEX cost is on higher side mainly due to present price range of Li Ion batteries, the OPEX cost and maintenance cost of ...
    Verlag: Society of Automotive Engineers , SAE International

    Clutch dual-disc brake design and braking efficiency test of heavy-duty vehicle

    Tan, Xingqiang / Zhang, Benwen | SPIE | 2024
    -duty truck because of it’s short braking distance, strong braking force, good performance of heat dissipation and low operation force compared ...

    Design and calculation of ventilation system for civil aircraft landing gear compartment

    Li, Chuang / Wu, Chenhan | SPIE | 2024
    of plan A has a better overall ventilation effect on the landing gear compartment, and the cooling effect of the upper and lower brake carbon ...

    Predictive under Hood Thermal Management Model

    P V, Navaneeth / ML, Sankar / Prasad, Suryanarayana A N | SAE Technical Papers | 2024
    , charge air cooling, air conditioning and turbocharger cooling. The appropriate thermal management of these critical components is necessary for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Advance Thermal Management System for Electric Vehicle – An Indian Case Study

    Emran, Ashraf / Pawar, Bhushan / Hemkemeyer, David et al. | SAE Technical Papers | 2024
    (e.g., intelligent pre-conditioning, cabin air circulation control and smart ventilation) for cooling, heat pump integration along with the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Low emission vehicles (LEV) and zero emission vehicles (ZEV)

    Development of a Fuel Efficiency Enhancement Module for Tractors

    Chinnathambi, Manikandan / Nabar, Omkar / Arjun, P. et al. | SAE Technical Papers | 2024
    increased power requirements. The developed system was installed on a 45 hp 2-wheel drive tractor, and its performance was evaluated. Field trials ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Agricultural vehicles and equipment

    A Novel Approach to Make an Efficient Thermal Management of a Solar Electric Four-Wheeler through Model-Based System Simulation

    Gumma, Muralidhar / Karthikeyan, Vikram Raj | SAE Technical Papers | 2024
    solar radiation, ambient temperature & and humidity, human metabolic activity, and other loads like the propulsion system temperature on the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sun and solar

    HVAC NVH Refinement in Electric Vehicle

    Manivannan, Giridharan / Rao, Manchi / S, Nataraja Moorthy et al. | SAE Technical Papers | 2024
    levels to a great extent in the vehicle without adding cost and weight.This paper focuses on reducing the tactile vibration in electric vehicle ...
    Verlag: Society of Automotive Engineers , SAE International

    Virtual Test Bed (VTB) Based Engine Calibration: Unique Approach to Ensure Engine Component Protection & to Meet WNTE in Different Environment Condition for Medium Duty Diesel Engine

    Sharma, Ajeet Kumar / Vos, Bas / Goyal, Dinesh et al. | SAE Technical Papers | 2024
    and load profiles and varying ATS layouts. Therefore, robust thermal measures are required to ensure adequate heating of ATS under various ...
    Verlag: Society of Automotive Engineers , SAE International

    Study of Critical Vias Design Parameters for Power Electronics Thermal Management

    Dougherty, Derek / Bhardwaj, Divyanshu / Patil, Sachin et al. | SAE Technical Papers | 2024
    sink/ cold plate design parameters like fin spacing, thickness, height etc. or sizing of the required cooling pump/fan. This paper focuses on ...
    Verlag: Society of Automotive Engineers , SAE International

    Multiphysics Simulation Supporting Systems Engineering for Fuel Cell Vehicles

    Reiter, Anton / Poetsch, Christoph / Ritzberger, Daniel et al. | SAE Technical Papers | 2024
    layout and sizing of the stack and the related fuel and air supply system components, as well as the suitable dimensioning of the cooling system ...
    Verlag: Society of Automotive Engineers , SAE International

    Hydrogen Refilling Optimizations Through 1-D Simulations for Commercial Vehicles

    Chougule, Abhijeet / Bhut, Bhaveshkumar / Jacob, Joe et al. | SAE Technical Papers | 2024
    Fuel cell electric vehicles (FCEVs) and battery electric vehicles are being touted worldwide by the automotive industry and policy makers ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical Analyses of AdBlue® Thawing Performance According to EU Norms

    Varughese, Shibu / Banik, Soumendu / Govindarajan, Vaishali et al. | SAE Technical Papers | 2024
    Controlling NOx emission demand is getting more severe with Euro 7 legislation. In turn, this brings more focus on SCR (Selective Catalytic ...
    Verlag: Society of Automotive Engineers , SAE International

    Moon pool heating system for polar region ship, ship and heating method

    Freier Zugriff
    YAN FENGQUAN / LIN WENLI / ZENG WEI | Europäisches Patentamt | 2023
    cooling system; the steam heater is communicated with the central heat exchanger and is used for heating the seawater subjected to heat exchange ...

    Study on Driving Forms and Control of Engine Cooling Fan

    Shangguan, Wenbin / Wang, Xihui / Wang, Xinling et al. | SAE Technical Papers | 2023
    The influence of engine cooling fan on the working state of engine cooling system under different driving forms and control strategy is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Simulation and modeling

    Calculation of Cooling Fan Blade Deformation and Aerodynamic Performance Based on Fluid-Structure Model

    Lin, HuiBin / Shangguan, Wenbin / Wang, Xinling et al. | SAE Technical Papers | 2023
    Considering the interaction between fan blades and the surrounding air when a cooling fan rotates, the Fluid-Structure Interaction (FSI ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Topology Optimization Design on Cooling-Plate for Lithium-ion Battery Based on Electro-Thermal Model

    Xie, Beichen / Ding, Kangjie / Lin, Zhenmao | SAE Technical Papers | 2023
    according to the heat dissipation requirements of lithium-ion power batteries under actual working conditions. Firstly, given the non-uniform heat ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Cabin Insulation on the Heating Performance in EVs at Low Temperatures

    Ramesh Babu, Anandh / Sebben, Simone / Bark, Tore | SAE Technical Papers | 2023
    passenger car, and the influence of insulation on different surfaces while climatizing under low ambient temperatures. A conjugate heat transfer ...
    Verlag: Society of Automotive Engineers , SAE International

    Modeling and Simulation Analysis of Electric Vehicle Battery Cooling System

    Deng, Bin / Zhou, Fu-Peng / Zheng, Quanxin et al. | SAE Technical Papers | 2023
    and analyzed, and the accuracy of the models were verified. The effects of coolant flow rate and radiator wind speed on the liquid cooling ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Simplified Modeling of an Innovative Heating Circuit for Battery Pack Based on Traction Motor Drive System

    Dai, Haifeng / Huang, Ranjun / Wang, Xinjian | SAE Technical Papers | 2023
    Alternating current (AC) heating is an efficient and homogeneous manner to warm Lithium-ion batteries (LIBs) up. The integrated design of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Heating, ventilation, and air conditioning systems (HVAC)

    CFD Simulation and Modelling of a Battery Thermal Management System: Comparison between Indirect and Immersion Cooling

    Rizzello, Alessandro / Strano, Daniele Isidoro / Ricci, Federico et al. | SAE Technical Papers | 2023
    paper mainly focuses on the thermal problems affecting the BTMS and sets two main goals: 1) to provide a comparison of two possible BTMS ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Computational Modeling of the Flow and Heat Transfer in an Internal Combustion Engine-Relevant Cooling Channel

    Klink, Artur / Hussong, Jeanette / Krüger, Louis et al. | SAE Technical Papers | 2023
    flow and heat transfer processes relevant to cooling systems of internal combustion engines, was computationally investigated by applying a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling , Research and development

    Variable-Efficiency Traction Inverter Provides Low Cost Multi-kW Coolant Heating

    Turudic, Andy | SAE Technical Papers | 2023
    , and is ~40x lower than the peak heating levels needed to warm a passenger cabin.Rather than resort to convention by adding expensive and ...
    Verlag: Society of Automotive Engineers , SAE International

    Study of Surface Insulation Structures to Reduce Cooling Loss in Heavy-Duty Diesel Engines

    Kawaharazuka, Fumihiro / Uchida, Noboru | SAE Technical Papers | 2023
    -cylinder cooling loss reduction studies have been carried out by applying various thermal barrier coatings to the piston and/or other in-cylinder ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Simulation Based Sensitivity Study of Piston Cooling Performance Parameters in Automotive Diesel Engines

    Sahu, Abhay Kumar / Chakkamadathil, Shirdi Dilipkumar / Gombi, Shrirang | SAE Technical Papers | 2023
    design and its cooling. To mitigate the likelihood of failure or damage to pistons, it is important to have a thorough understanding of the ...
    Verlag: Society of Automotive Engineers , SAE International

    Piston Pre-Heating Using a Pressurized-Heated Oil Buffer: A Practical Method to Reduce ICE Emissions and Fuel Consumption

    Bovo, Mirko / Mubarak Ali, Mohammed Jaasim | SAE Technical Papers | 2023
    cooling nozzles. The device provides further benefits in emissions and fuel consumption in two ways: 1) the warm oil pre-lubricates the engine ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Understanding Hydrocarbon Emissions to Improve the Performance of Catalyst-Heating Operation in a Medium-Duty Diesel Engine

    Wu, Angela / Lopez Pintor, Dario / Cho, Seokwon | SAE Technical Papers | 2023
    , and based on the understanding, develops combustion strategies to simultaneously improve exhaust ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Investigation of Solenoid-Controlled Piston Cooling Jet Benefits for a 1.5l, 3 Cylinder Tcic Diesel Engine

    VIGNESH, A. C. / Sithick basha, Abubakker / Dharan R, Bharani et al. | SAE Technical Papers | 2023
    government. To meet the government norms such as CAFE (Corporate Fuel Average Economy), different technologies are being explored and implemented in ...
    Verlag: Society of Automotive Engineers , SAE International

    CFD Assessment of an After-Treatment System Equipped with Electrical Heating for the Reduction of the Catalyst Light-Off Time

    Onorati, Angelo / Della Torre, Augusto / Gullino, Fabrizio et al. | SAE Technical Papers | 2023
    vehicles tested on homologation cycles and real drive conditions. The adoption of heating strategies to increase the temperature of the catalytic ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Starters and starting

    Sliding Mesh Fan Approach Using Open-Source Computational Fluid Dynamics to Investigate Full Vehicle Automotive Cooling Airflows

    Guzman, Arturo / Vilchis Contreras, Eloy / Doroudian, Mark | SAE Technical Papers | 2023
    Cooling airflow is an essential factor when it comes to vehicle performance and operating safety. In recent years, significant efforts have ...
    Verlag: Society of Automotive Engineers , SAE International

    A CFD-Based Numerical Evaluation, Assessment and Optimization of Conjugate Heat Transfer for Aerodynamic Cooling of a Wheel-Hub-Motors in Micro-Mobility Vehicles

    Mambazhasseri Divakaran, Arun / Abo-Serie, Essam / Gkanas, Evangelos et al. | SAE Technical Papers | 2023
    parameters (Fins and air-vents/holes) in cooling the motor. Air vents and external fins on rotor–lid (rotor cover) has a greater effect on cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Influence of operating conditions on thermal requirements in gas turbine blades

    L.R., Marconi / F.A.F, Monhol / C.P.S., Silva | SAE Technical Papers | 2023
    its rotors through internal cooling technologies. By means of a thermodynamic modeling of the process and the use of the finite difference ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems