101–120 von 401 Ergebnissen
|

    Heat Treatment Nickel Alloy and Cobalt Alloy Parts

    SAE Technical Papers | 2020
    This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or subcontractors, of parts made ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered

    SAE Technical Papers | 2020
    This specification covers a corrosion and heat-resistant steel in the form of bars, forgings, and forging stock. AMS5743K prohibits ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted

    SAE Technical Papers | 2020
    , flash welded rings up to 8.0 inches (203 mm) in diameter or least distance between parallel sides in the solution heat treated condition (see ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, TYPE VI, ANTIFRICTION, INCH

    SAE Technical Papers | 2020
    TOLERANCE LIMITS. UPDATED TABLE 3 TITLE. UPDATED SUPERSEDED MATERIAL TO ASTM A295/A295M. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy Tubing, Seamless, Drawn 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed

    SAE Technical Papers | 2020
    (0.46 to 12.70 mm) inclusive (see 8.5). AMS4087J prohibits unauthorized exceptions (3.6), revises Title to re-insert the composition ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Enhancing the Tribological Properties PETG and CFPETG Composites Fabricated by FDM via Various Infill Density and Annealing

    Palanivelu, Ramprakash / Kumar K, Sathish / gopal, Shanthosh et al. | SAE Technical Papers | 2020
    One of the prominent representatives of heat-resistant polymers was the class of Polyethylene Terephthalate Glycol (PETG) with high ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

    SAE Technical Papers | 2020
    requirements of Title 14 CFR Part 25, except for the 9.0-g forward ultimate inertia force of § 25.561 (b)(3)(ii). After publication of AS36100B ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Design and Analysis of Hybrid Composite Brake Disc with Various Grooves

    Adithyaa, Sachin / venkatesan, Sanjeev / gopal, Shanthosh et al. | SAE Technical Papers | 2020
    (AA8011) and its composite (AA8011 (5 wt% B4C +3 wt% Gr)) are considered after heat treatment (T6) as disc materials. The properties are measured ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat transfer , Heat treatment

    Design and Analysis of Steering Knuckle at Diverse Strengthening Condition

    Raja, Ajith / C, Pradeep / gopal, Shanthosh et al. | SAE Technical Papers | 2020
    objective of this work was processed under three different conditions like virgin AA7075, AA7075 with T6 heat treatment and AA7075 with T6 heat ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Solution Heat Treated

    SAE Technical Papers | 2019
    This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L) Solution Heat Treated

    SAE Technical Papers | 2019
    This specification covers a corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Heat Treated, 170 ksi (1172 MPa) Tensile Strength

    SAE Technical Papers | 2019
    This specification covers a corrosion and heat-resistant steel in the form of bars, forgings, and forging stock. AMS5744F prohibits ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked

    SAE Technical Papers | 2019
    (1.1.1). Additionally, it prohibits unauthorized exceptions (3.6) and revises title, condition (3.2), properties (3.3.2), quality (3.4.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3511) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Straightened

    SAE Technical Papers | 2019
    (1.1.1). Additionally, it prohibits unauthorized exceptions (3.6) and revises title, condition (3.2), properties (3.3.2), quality (3.4.1.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 12Cr - 0.12Cb (Nb) (410 Modified) Ferrite Controlled, Annealed

    SAE Technical Papers | 2019
    This specification covers an aircraft-quality, corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution Treated and Work-Strengthened Capable of 160 ksi (1103 MPa) Tensile Strength

    SAE Technical Papers | 2019
    , chemical analysis standards (3.1), heat treatment (3.4), properties (3.5), reports (4.4) and identification (5.2.1), and results from a Five-Year ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Tensile and Fatigue Behavior of Shallow Cryogenically Treated EN19 Alloy Steel

    Sekar, Loganathan / Raj, Rajendran / Arasan, Tamil | SAE Technical Papers | 2019
    mechanical behavior. The test samples were conventionally heat treated then oil quenched at room temperature. Followed by the samples were kept for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Zinc Phosphate Treatment Paint Base

    SAE Technical Papers | 2019
    . AMS2480J results from a Five-Year Review and update of this specification with changes to title, ordering information, hydrogen embrittlement ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel Bars, Forgings, and Mechanical Tubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb (Nb) - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted

    SAE Technical Papers | 2019
    forging stock. AMS5900C prohibits unauthorized exceptions (3.7), revises title, composition to update applicable analysis standards (3.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O) Annealed, Fine Grain

    SAE Technical Papers | 2019
    , alclad. AMS4274B prohibits unauthorized exceptions (3.6), revises Title to correct temper designation, Condition (3.2), Properties (3.3.3 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment