1–50 von 462 Ergebnissen
|

Ihre Suche:
journal:(International Journal of Operations

    11 Reasons to Use Automated Metrology

    Miller, Carson / Flynn, Robert | SAE Technical Papers | 2019
    Aerospace structures manufacturers find themselves frequently engaged in large-scale 3D metrology operations, conducting precision ...
    Verlag: Society of Automotive Engineers , SAE International

    Accuracy Analysis for a Flow Line Process using a Mobile Holding Fixture for Machining CFRP Components

    Boehlmann, Christian / Moeller, Christian / Brillinger, Christoph et al. | SAE Technical Papers | 2022
    machining of large-scale components. Apart from the machining tasks, non-productive operations like fixture adjustment, component handling ...
    Verlag: Society of Automotive Engineers , SAE International

    A Century of Environmental Technologies for Light-Duty Vehicles

    Holmes, Keith John | SAE Technical Papers | 2017
    This paper provides a long-term view of the deployment of environmental technologies for light-duty vehicles in the United States and their ...
    Verlag: Society of Automotive Engineers , SAE International

    Achieving Diesel Powertrain Ownership Parity in Battery Electric Heavy Duty Commercial Vehicles Using a Rapid Recurrent Recharging Architecture

    Smith, David / Xie, Fei / Sujan, Vivek Anand | SAE Technical Papers | 2022
    Cost of Ownership (TCO) to enable strong adoption of electrified powertrains. At present, relatively high energy storage prices coupled with ...
    Verlag: Society of Automotive Engineers , SAE International

    A Cloud-Based Simulation and Testing Framework for Large-Scale EV Charging Energy Management and Charging Control

    Chen, Bo / Dobrzynski, Daniel / Harper, Jason et al. | SAE Technical Papers | 2022
    The emerging need of building an efficient Electric Vehicle (EV) charging infrastructure requires the investigation of all aspects of ...
    Verlag: Society of Automotive Engineers , SAE International

    A Cockpit Point of View on "Human Factors" for a Changing ATM Environment

    Reuzeau, Florence / Straussberger, Sonja | SAE Technical Papers | 2011
    and new separation modes characterize the future concept of operations, where the role of the human operator will remain central by ...
    Verlag: Society of Automotive Engineers , SAE International

    A Comparison Between External and Internal Resonators Employment to Reduce the Gas-Dynamic Noise of a SI Engine

    Siano, Daniela / Bozza, Fabio / Teodosio, Luigi et al. | SAE Technical Papers | 2014
    at full load operations. 1D model is realized within GT-Power™ software and it utilizes proper user routines for the modeling of the ...
    Verlag: Society of Automotive Engineers , SAE International

    A Comparison of Various Fire Detection Methodologies in Transit Vehicle Engine Compartment Fire Protection Systems

    Chattaway, Adam / Peoples, Joey / Smith, Paul | SAE Technical Papers | 2012
    Distinctly different fire hazards exist within the engine compartment of a transit vehicle and various detection methodologies may be ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Hazards and emergency operations

    Active Control of Cylinder Charge Motion Using Vortex Generating Jets (VGJs) on Generic Intake Port Geometries

    Eilts, Peter / Scholz, Peter / Sun, Shaowei et al. | SAE Technical Papers | 2018
    influence of air injection on engine operations has been analyzed by means of a 1-D engine simulation. The results show the ...
    Verlag: Society of Automotive Engineers , SAE International

    Active fixturing: literature review and future research directions

    Bakker, O.J. / Papastathis, T.N. / Popov, A.A. et al. | Tema Archiv | 2013
    manufacturing operations to increase the end product quality. This paper analyses the latest studies in the field of active fixture design and its ...

    Adaptive Linear Quadratic Control for High Dynamical and Comfortable Behavior of a Heavy Truck

    Webersinke, Lena / Augenstein, Lutz / Hertweck, Mario et al. | SAE Technical Papers | 2008
    During the last few years numerous innovations in advanced driveline control have improved the performance of commercial vehicles. In this ...
    Verlag: Society of Automotive Engineers , SAE International

    Adaptive Manufacturing System

    Habermann, Charles J. / Cunov, James | SAE Technical Papers | 2014
    The ever increasing use of composites for aircraft components presents opportunities for new ways to process these parts. There are myriad ...
    Verlag: Society of Automotive Engineers , SAE International

    A Data-Driven Greenhouse Gas Emission Rate Analysis for Vehicle Comparisons

    Burns, Cooper / Leach, Felix / Conway, Graham et al. | SAE Technical Papers | 2022
    . This shift has been ascribed to the importance of reducing greenhouse gas (GHG) emissions from transportation to ...
    Verlag: Society of Automotive Engineers , SAE International

    A different perspective in participatory ergonomics in product development improves assembly work in the automotive industry

    Sundin, A. / Christmansson, M. / Larsson, M. | Tema Archiv | 2004
    This paper describes a case study of a product development process in a bus manufacturing company. The company's design and chassis ...

    Advance of beta titanium alloy TIMETAL(registered trademark) LCB in automotive spring applications

    Kosaka, Yoji / Faller, Kurt | Tema Archiv | 2006
    readily be fed into CNC spring winding machines used for steel wires without any major changes or extra operations. LCB suspension springs have ...

    Aerodynamics of Landing Maneuvering of an Unmanned Aerial Vehicle in Close Proximity to a Ground Vehicle

    Misar, Adit / Hahn, Cortney / Uddin, Mesbah et al. | SAE Technical Papers | 2023
    active research for the past several years. For military missions requiring repeated flight operations of the UAV, precise landing ability is ...
    Verlag: Society of Automotive Engineers , SAE International

    A Fast Crank Angle Resolved Zero-Dimensional NOx Model Implemented on a Field-Programmable Gate Array

    Muric, Kenan / Stenlaas, Ola / Tunestal, Per | SAE Technical Papers | 2013
    example, the pressure sensor offers the opportunity to design algorithms for estimation of engine emissions, such as soot and NO, during a ...
    Verlag: Society of Automotive Engineers , SAE International

    A Framework for Developing an EPS Health Management System

    Morris, Charles / Keller, Kirby / Hernandez, Luis et al. | SAE Technical Papers | 2010
    integral part of every aircraft subsystem, system, and the entire platform. Ultimately, the objective is to improve the entire maintenance ...
    Verlag: Society of Automotive Engineers , SAE International

    A general model for inferring terrain surface roughness as a root-mean-square to predict vehicle off-road ride quality

    Durst, Phillip J. / Baylot, Alex / McKinley, Burney et al. | Tema Archiv | 2014
    Vehicle maximum speed for off-road operations is limited by the absorbed power via vertical acceleration to the driver for a given terrain ...

    Agent-Based Modeling and Simulation of Collaborative Air Traffic Flow Management using Brahms

    Enomoto, Francis Y. / Sierhuis, Maarten / Jarvis, Peter A. et al. | SAE Technical Papers | 2009
    developed a new collaborative air traffic flow management concept of operations that involves the users of the airspace to a greater degree. In this ...
    Verlag: Society of Automotive Engineers , SAE International

    A geographic view of expansion choices by U.S. firms in China

    Wooster, Rossitza B | Online Contents | 2016
    How does geography matter for explaining the location patterns of U.S. companies in China? We combine insights from the literature on ...

    Aggressive Torque Converter Clutch Slip Control and Driveline Torsional Velocity Measurements

    Kao, Chi-Kuan / Lee, Chunhao Joseph / Samie, Farzad et al. | SAE Technical Papers | 2008
    torque converters are ideal launch devices for automatic transmissions, they are inefficient in steady-state operations. An electronically ...
    Verlag: Society of Automotive Engineers , SAE International

    A Hierarchical Reasoning Structure to Support Aerospace IVHM

    Roemer, Michael | SAE Technical Papers | 2011
    One of the inherent functions of an integrated vehicle health management (IVHM) system is the reasoning capability that is built on the ...
    Verlag: Society of Automotive Engineers , SAE International

    A High Efficiency, Dilute Gasoline Engine for the Heavy-Duty Market

    Chadwell, Christopher / Zuehl, Jacob / Gukelberger, Raphael et al. | SAE Technical Papers | 2012
    A 13 L HD diesel engine was converted to run as a flame propagation engine using the HEDGE™ Dual-Fuel concept. This concept consists of pre ...
    Verlag: Society of Automotive Engineers , SAE International

    A History of Space Toxicology Mishaps: Lessons Learned and Risk Management

    James, John T. | SAE Technical Papers | 2009
    with toxic microbial metabolites, upsets during repair operations, and discharges from filters that have accumulated a substantial load of ...
    Verlag: Society of Automotive Engineers , SAE International

    Aircraft control surface deflection using RBF-based mesh deformation

    Michler, Andreas K. | Tema Archiv | 2011
    sites are distributed on its faces and the evaluation is performed in the auxiliary geometry exclusively. Since the number of operations for ...

    Aircraft life management using crack initiation and crack growth models - P-3C Aircraft experience

    Iyyer, Nagaraja / Sarkar, Subhasis / Merrill, Robert et al. | Tema Archiv | 2007
    management. The first section of the paper discusses general fleet life assessment methods followed by a description of traditional US Navy method of ...
    Schlagwörter: USA (United States of America)

    Aircraft Wing Build Philosophy Change through System Pre-Equipping of Major Components

    Lawson, Craig / Judt, David / Lockett, Helen et al. | SAE Technical Papers | 2016
    where there is a large backlog of orders. One of the bottlenecks is the wing assembly process which is largely manual due to the complexity of ...
    Verlag: Society of Automotive Engineers , SAE International

    A laboratory investigation on the influence of the particle size and slip during sanding on the adhesion and wear in the wheel-rail contact

    Arias-Cuevas, Oscar / Li, Zili / Lewis, Roger | Tema Archiv | 2011
    rig in rolling-sliding motion. Three different slips representative of actual traction and braking operations have been considered in the ...

    A Lookup Table-Based Reference Flux Linkage Selection of Direct Torque Control Induction Motor Drive for Electric Vehicle Applications: An Offline Strategy

    Singh, Amit Kumar / Reddy, C. Upendra / Prabhakar, Kashyap Kumar et al. | SAE Technical Papers | 2020
    -efficiency electric drive for these vehicles, and their control over a wide range of operations. In this article, an electric vehicle drive with ...
    Verlag: Society of Automotive Engineers , SAE International

    Ambulance Vehicle Crashworthiness and Passive Safety Design: A Comparative Evaluation

    Levick, Nadine / Grzebieta, Raphael | SAE Technical Papers | 2008
    safety record. This comparative evaluation of USA ‘concept safety’ ambulances and a standard Australian ambulance is based on basic principles of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Hazards and emergency operations

    A Methodology for Design Decisions using Block Diagrams

    Pandey, Vijitashwa / Mourelatos, Zissimos | SAE Technical Papers | 2013
    diagram with linear algebra operations. This paper details the theoretical basis of the proposed method and highlights its importance. An example ...
    Verlag: Society of Automotive Engineers , SAE International

    A model based approach for the optimization of gearshifting in automatic transmissions

    Haj-Fraj, A. / Pfeiffer, F. | Tema Archiv | 2002
    In this paper an approach for the optimization of gear shift operations in automatic transmissions based on a verified mechanical model for ...

    A Model Reference Adaptive Controller for an Electric Motor Thermal Management System in Autonomous Vehicles

    Rizoo, Denise / Wagner, John / Miller, Richard Steven et al. | SAE Technical Papers | 2022
    estimate the optimum fan and pump operations at each control interval. Four different control strategies ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis and Control of a Torque Blended Hybrid Electric Powertrain with a Multi-Mode LTC-SI Engine

    Solouk, Ali / Shahbakhti, Mahdi / Shakiba-herfeh, Mohammad | SAE Technical Papers | 2017
    the in-cylinder combustion process. However, the narrow operating range of LTC engines limits the use of these engines in conventional ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis and Optimization of Automotive Self-Priming Door Lock Closing Sound

    Hou, Hangsheng / Feng, Jingting / Zhang, Yan et al. | SAE Technical Papers | 2023
    With higher customer expectations and advances in vehicular technology, automotive functions and operations are ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis of a hydrogen station roll-out strategy to introduce hydrogen vehicles in Andalusia

    Brey, J.J. / Carazo, A.F. / Brey, R. | Tema Archiv | 2014
    The issue of the distribution of a sufficient infrastructure of hydrogen fueling stations to enable meeting of the initial demand and to ...
    Schlagwörter: Operations Research

    Analysis of an air hybrid engine concept with an energy recovery valve

    Zhao, H. / Psanis, C. / Ma, T. | Tema Archiv | 2011
    ) operations. After having defined the optimal valve timings for CM and EM operations over a range of engine speeds, the effect of other operating ...

    Analysis of cyclic variations during mode switching between spark ignition and controlled auto-ignition combustion operations

    Tao Chen | Online Contents | 2015
    . In this work, the cyclic variations in SCHC operations were analyzed by means of in-cylinder pressure and heat release analysis in a single ...

    Analysis of Knock Tendency in a Small VVA Turbocharged Engine Based on Integrated 1D-3D Simulations and Auto-Regressive Technique

    Siano, Daniela / Severi, Elena / Bozza, Fabio et al. | SAE Technical Papers | 2014
    In the present paper, two different methodologies are adopted and critically integrated to analyze the knock behavior of a last generation ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis of LiDAR and Camera Data in Real-World Weather Conditions for Autonomous Vehicle Operations

    Abdel-Qader, Ikhlas / Rojas, Johan / Omwanas, Mark et al. | SAE Technical Papers | 2020
    autonomous vehicle operations in adverse weather conditions (e.g. snow-covered roads, heavy rain, fog, etc.) due to the degradation of sensor data ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis of the Influence of Outdoor Temperature in Vehicle Cold-Start Operation Following EU Real Driving Emission Test Procedure

    Duarte, Gonçalo / Sousa, Luis / Mendoza Villafuerte, Pablo et al. | SAE Technical Papers | 2017
    operations of a vehicle, which will also pose uncertainties in RDE tests. Consequently, this work studies the effect of external environmental ...
    Verlag: Society of Automotive Engineers , SAE International

    Analysis of Tool Wear for Trimming of DP980 Sheet Metal Blanks

    Sohmshetty, Raj / Nasheralahkami, Saeid / Dawson, Scott et al. | SAE Technical Papers | 2017
    methodology of analyzing die wear for trimming operations of UHSS components and illustrate it with some examples of tool wear analysis for trimming ...
    Verlag: Society of Automotive Engineers , SAE International

    An Approach to Model Sheet Failure After Onset of Localized Necking in Industrial High Strength Steel Stamping and Crash Simulations

    Metzmacher, Guido / Werner, Heinrich / Gese, Helmut et al. | SAE Technical Papers | 2008
    In large-scale industrial simulations the numerical prediction of fracture in sheet metal forming operations as well as in crash events is ...
    Verlag: Society of Automotive Engineers , SAE International

    An Architecture for Monitoring and Anomaly Detection for Space Systems

    Cortes, Edwin A. / Rabelo, Luis | SAE Technical Papers | 2013
    . The application of tablet computing in the cloud can provide flexibility of operations in spacecraft systems. Astronauts can use tablets as a ...
    Verlag: Society of Automotive Engineers , SAE International

    An Asymmetric Wrenching System with High Torque Transfer Capability for Aerospace Pins

    Gurrola, Robert / Pinheiro, Rodrigo / Dzebo, Sead | SAE Technical Papers | 2016
    The installation of common threaded aerospace fasteners by the application of a torque to a nut or collar is made possible by an internal ...
    Verlag: Society of Automotive Engineers , SAE International

    An auto weather-vaning system for a dp vessel that uses a nonlinear controller and a disturbance observer

    Kim, Dae Hyuk / Kim, Nakwan | Online Contents | 2014
    incoming in the transverse direction. Weather- vaning is the concept of making the heading angle of the DP vessel head toward (or sway from) the ...

      An auto weather-vaning system for a dp vessel that uses a nonlinear controller and a disturbance observer

      Kim, Dae-Hyuk / Kim, Nakwan | Tema Archiv | 2014
      in the transverse direction. Weather- vaning is the concept of making the heading angle of the DP vessel head toward (or sway from) the ...

    A Near-Term Path to Assured Aerial Autonomy

    Coblenz, Lauren / Chamberlain, Lyle / Bartlett, Paul et al. | SAE Technical Papers | 2023
    defined concepts of operations. We present specific autonomy functions common to many civil beyond visual ...
    Verlag: Society of Automotive Engineers , SAE International

    A Need for Processes that Future Proof the Fiber Optic Installation

    Forrest, Edward John | SAE Technical Papers | 2013
    The tenets of IEC 61300-3-35 have influenced and contributed to numerous standards. These include: a.) the importance of cleaning the fiber ...
    Verlag: Society of Automotive Engineers , SAE International