Synonyme wurden verwendet für: SAE congress exhibition
Suche ohne Synonyme: title: SAE 2013 world congress and exhibition

121–140 von 22,828 Ergebnissen
|

    Evaluation of Leakage-Retaining Capacity (SAE J1002) for Different Concepts of Hydrodynamic Seals

    Gorriño, Anton / Upper, Gerd | SAE Technical Papers | 2005
    Design parameters of hydrodynamic elements had been analyzed and evaluated in respect to pumping and leakage-retaining capacity (SAE J1002 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Seals and gaskets

    Optimal Diffuser Design for Formula SAE Race Car Using an Innovative Geometry Buildup and CFD Simulation Setup with On-Track Testing Correlation

    Ehirim, Obinna | SAE Technical Papers | 2012
    Race car aerodynamic design and improvements enhance the performance of a race car. However, the use of aerodynamic devices by FSAE ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling

    Real-World Safety Effect of Roll Stability Control

    Blower, Daniel / Woodrooffe, John | SAE Technical Papers | 2013
    Heavy truck rollover remains a primary factor in truck driver fatalities and injury. Roll stability control (RSC) and electronic stability ...
    Verlag: Society of Automotive Engineers , SAE International

    Real-World Rollovers Reconstructed from Interviews and Measurements

    Schubert, Peter J. | SAE Technical Papers | 2006
    Three vehicle rollovers have been reconstructed based on driver interviews and approximate measurements of crash artifacts. The purpose of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sensors and actuators , Tools and equipment

    Driving Style Identification Algorithm with Real-World Data Based on Statistical Approach

    Kim, Bill / Gao, Bo / Fuente, David et al. | SAE Technical Papers | 2016
    vehicle class, the type of road it was driven on (urban, rural or motorway) and different types of driving events (launch, accelerating and ...
    Verlag: Society of Automotive Engineers , SAE International

    Real-World Thermal Effects on Wheel Assembly Efficiency of Conventional and Electric Vehicles

    Jehlik, Forrest / Rask, Eric / Duoba, Michael | British Library Conference Proceedings | 2016

    Characterization of Lane Departure Crashes Using Event Data Recorders Extracted from Real-World Collisions

    Gabler, Hampton C. / Kusano, Kristofer D. | SAE Technical Papers | 2013
    of LDW and other departure countermeasures is understanding pre-crash driver behavior in crashes. The objective of this study was to gain ...
    Verlag: Society of Automotive Engineers , SAE International

    Cold Start SI Passenger Car Emissions from Real World Urban Congested Traffic

    Khalfan, Ahmad / Andrews, Gordon / Li, Hu | SAE Technical Papers | 2015
    The tailpipe exhaust emissions were measured under real world urban driving conditions by using a EURO4 emissions compliant SI car equipped ...
    Verlag: Society of Automotive Engineers , SAE International

      Cold Start SI Passenger Car Emissions from Real World Urban Congested Traffic

      Khalfan, Ahmad / Li, Hu / Andrews, Gordon | British Library Conference Proceedings | 2015

    Impact of Real-World Drive Cycles on PHEV Battery Requirements

    Rousseau, Aymeric / Nam, Edward / Hoffman, George et al. | SAE Technical Papers | 2009
    (Argonne), working with the FreedomCAR and Fuels Partnership, helped define the battery requirements for PHEVs. Previous studies demonstrated the ...
    Verlag: Society of Automotive Engineers , SAE International

    Application of Real-World Wind Conditions for Assessing Aerodynamic Drag for On-Road Range Prediction

    D'Hooge, Andrew / Duncan, Bradley / Gargoloff, Joaquin et al. | SAE Technical Papers | 2015
    Aerodynamic evaluation of vehicles using static yaw angle changes in wind tunnel testing and numerical simulation has been used as standard ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Real-World Thermal Effects on Wheel Assembly Efficiency of Conventional and Electric Vehicles

    Rask, Eric / Jehlik, Forrest / Duoba, Michael | SAE Technical Papers | 2016
    -world conditions is less understood and quantified.This work characterizes wheel assembly efficiencies of a conventional and electric vehicle ...
    Verlag: Society of Automotive Engineers , SAE International

    Correlation of the Sequence VID Laboratory Fuel Economy Test to Real World Fuel Economy Improvements

    Guinther, Gregory / Styer, Jeremy | SAE Technical Papers | 2013
    fuel economy under real-world driving conditions, and the deterioration of oils and resulting fuel economy in the standard laboratory test used ...
    Verlag: Society of Automotive Engineers , SAE International

    Systems Engineering in an Automotive E/E Design World

    Smith, Nick | SAE Technical Papers | 2015
    Demand for increased functionality in automotive electrical/electronic (E/E) systems is being propelled by both customers and various ...
    Verlag: Society of Automotive Engineers , SAE International

    Novel Approaches for Model-Based Development - Part I: Developing a Real-World Driver Model

    Tellikepalli, KumarPrasad / Pandey, Nabal Kishore / Vedula, Sashank Mani et al. | SAE Technical Papers | 2016
    paper intends to provide a novel solution to understand drive behavior of a real world driver and model the same for VTE. Also, impact of ...
    Verlag: Society of Automotive Engineers , SAE International

    Multi-Objective Design Optimization Using a Damage Material Model Applied to Light Weighting a Formula SAE Car Suspension Component

    Acar, E. / Solanki, K. / Brister, K. E. et al. | SAE Technical Papers | 2009
    The Mississippi State University Formula SAE race car upright was optimized using radial basis function metamodels and an internal state ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Education and training , Simulation and modeling

    Vehicle Response and Real World Driving Pattern for Indian Scenario for Vehicle Development and Optimization Program

    Kale, J. G. / Saraf, M. R. / Jambhale, M. S. et al. | SAE Technical Papers | 2013
    The Indian automotive industry today stands as the most vibrant, modern and upbeat automobile market in the world and is the current focus ...
    Schlagwörter: Roads and highways

    U. S. Automotive Corrosion Trends: 1998 SAE (ACAP) Automotive Body Corrosion Survey Results

    Tiburcio, A. C. / Yergin, M. J. | SAE Technical Papers | 2003
    The Body Division of the Automotive Corrosion and Prevention Committee of SAE (ACAP) has conducted biannual surveys of automotive body ...
    Verlag: Society of Automotive Engineers , SAE International

    Benefits from Heads-Up Lane Departure Warnings Predicts Safety in the Real-World

    Lester, Benjamin / Dawson, Jeffrey / Sager, Lauren et al. | SAE Technical Papers | 2016
    , mean = 35 years) and 37 older drivers (66-87, mean = 77 years). The LDW included yellow “advisory” visuals in the center screen when the driver ...
    Verlag: Society of Automotive Engineers , SAE International

    Robust Emission Management Strategy to Meet Real-World Emission Requirements for HD Diesel Engines

    Kooijman, Dennis / Kupper, Frank / Willems, Frank et al. | SAE Technical Papers | 2015
    construction industry. For these wide variety of areas, the engine performance needs to comply with the real-world legislation limits and should ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Construction vehicles and equipment

    Retroreflective DOT-C2 Tape Performance in Relation to Observation and Entrance Angle - A Real World Study

    Suway, Jeffrey Aaron / Welcher, Judson | SAE Technical Papers | 2015
    Accident reconstruction experts are often asked to evaluate the visibility and conspicuity of objects in the roadway. It is common for ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Windows and windshields , Research and development , Safety regulations and standards