1–20 von 61 Ergebnissen
|

    Failure analysis of a crude oil pipeline

    Azevedo, Cesar R.F. | Tema Archiv | 2007
    nucleation. The internal surface of the tube and the cracking surfaces presented a deposit layer, which was rich in Fe, O and S. Diffractometry on ...

    Failure analysis of landing gears trunnions due to service

    Infante, V. / Reis, L. / De Freitas, M. | Tema Archiv | 2014
    tools were used in order to find out the primary cause of failure, namely, visual examination, chemical analysis and macroscopic, microscopic ...

    Fracture mechanics in aircraft failure analysis: Uses and limitations

    Wanhill, R.J.H. / Molent, L. / Barter, S.A. | Tema Archiv | 2013
    failure fatigue crack growth (FCG) behaviour. LEFM analyses can assist in analysing FCG in full-scale, component and specimen tests, and these ...
    Schlagwörter: Störfallanalyse

    Failure analysis and diagnostics for railway trackside equipment

    Garcia Marquez, Fausto Pedro / Weston, Paul / Roberts, Clive | Tema Archiv | 2007
    dependability is through improved maintenance and failure management. The collection and processing of information to ascertain the condition of railway ...

    Analysis of failure of add-on armour for vehicle protection against ballistic impact

    Galvez, Vicente Sanchez / Paradela, Laura Sanchez | Tema Archiv | 2009
    . This paper summarizes the utilization of analytical and numerical computation of ceramic/metal and ceramic/composite add-on armour failure ...

    Engineering Failure Analysis Methodology & Influence of Spline Cutting Method in Torsional Life Improvement in Tractor Axle Application

    Gunalan, Magendran | SAE Technical Papers | 2023
    equipment needs to perform multiple applications to enhance the productivity and increased horsepower demands all-wheel drive (Refer fig. 1) or four ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure analysis , Analysis methodologies

    Failure analysis of seat belt buckle inertial release

    Roberts, A. / Partain, M. / Batzer, S. et al. | Tema Archiv | 2007
    Failure not only occurs when components fracture or yield under stress; it is also characterized by components failing to perform a ...
    Schlagwörter: Ausfall

    Statistical Analysis of Spacecraft Failure in Full-Life Based on STED

    Ji, Xin-Yan / Wang, Jing | IEEE | 2019
    spacecraft launched in China. The result shows that the early failure period on-orbit last about 1 years, and failures occurs mainly in the first ...

    Fatigue Failure Analysis of Diesel Engine Connecting Rod

    Thakur, Anil / Alam, Md Tauseef / Ghadei, Sataya et al. | SAE Technical Papers | 2018
    affecting failure including structural design, type of material and dynamic loads were assessed using standard failure analysis method. This ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Failure analysis

    Failure analysis of a non-integral pipeline collet connector

    Fassina, P. / Guagliano, M. / Lazzari, L. et al. | Tema Archiv | 2005
    This paper describes the failure analysis carried out on a 12''-non-integral pipeline collet connector, joining a 12''-pipeline with an ...

    Trends in the analysis and design of marine structures : proceedings of the 7th International Conference on Marine Structures (MARSTRUCT 2019), Dubrovnik, Croatia, 6-8 May 2019

    MARSTRUCT | TIBKAT | 2019
    -- Development of compressive failure test and analysis method for ice -- An ice material model addressing the influence of strain rate, temperature ...
    Schlagwörter: Marine engineering-Congresses

    Design of a motor glider landing gear strut – The role of failure analysis in structural integrity

    Erasmus, D.J. / Hattingh, D.G. / Young, A.B. et al. | Tema Archiv | 2014
    arise early in the operation of the aircraft. This paper presents a case study involving failure of a landing gear strut on a homebuilt motor ...

    Reverse engineering gone wrong: a case study

    McEvily, A.J. | Tema Archiv | 2005
    replacement parts. The second manufacturer used a process known as reverse engineering in manufacturing the parts. That is, he attempted to copy in ...
    Schlagwörter: Störfallanalyse

    Analysis on Causes of Deformation and Failure of Large Scale Underground Powerhouse

    Dong, Jin-Yu / Yang, Ji-Hong / Yang, Guo-Xiang et al. | Tema Archiv | 2011
    downstream crown after supporting. This paper analysed the causes of deformation and failure through geological analysis and numerical simulation ...

    Some key effects on the failure assessment of weld repairs in CrMoV pipelines using continuum damage modelling

    Sun, W. / Hyde, T.H. / Becker, A.A. et al. | Tema Archiv | 2005
    , etc., on the failure life of the repaired welds. The potential uses and limitations of the damage analysis for weld repair performance ...

    Mechanical Ground Support Equipments (MGSE) for ARSAT-1 Hazard Analysis

    González, J. / Bastías, C. / Barberis, E. et al. | Springer Verlag | 2015
    -1, a geostationary communications satellite that will be operated by AR-SAT and constructed by INVAP. This analysis was made in order to ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Hazard Analysis , Engineering

    Investigating the effect of road roughness on automotive component

    Reza-Kashyzadeh, Kazem / Ostad-Ahmad-Ghorabi, Mohammad Jafar / Arghavan, Alireza | Tema Archiv | 2014
    tire is in motion. Therefore, suspension testing that has a direct impact on passenger safety and comfort is essential and important. Given the ...

    Computational and experimental crash analysis of the road safety barrier

    Ren, Z. / Vesenjak, M. | Tema Archiv | 2005
    The paper describes the computational analysis and experimental crash tests of a new road safety barrier. The purpose of this research was ...

    Fatigue analysis of railway coupling joint

    Infante, Virginia / Duarte, Pedro / Moura Branco, Carlos | Tema Archiv | 2007
    A new type of railway coupling joint, developed by a leading international railway manufacturer, has shown limited fatigue lives in service ...

    Failure and stiffness analysis of ceramic from a 25-mm diameter diesel particulate filter

    Fox, Ethan E. / Wereszczak, Andrew A. / Lance, Michael J. et al. | Tema Archiv | 2012
    secant elastic modulus of the DPF ceramics at failure initiation stress is approximately 1-2 GPa; this is approximately one order of magnitude ...
    Schlagwörter: Ausfall