1–50 von 401 Ergebnissen
|

    Heat Treatment Nickel Alloy and Cobalt Alloy Parts

    SAE Technical Papers | 2020
    This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or subcontractors, of parts made ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Development of energy efficient heat treatment processes for light weight automotive castings

    Kasprzak, W. / Sokolowski, J.H. / Yamagata, H. et al. | Tema Archiv | 2009
    Experimental results pertaining to the development of energy efficient heat treatment processes for vacuum High Pressure Die Casting (HPDC ...

    Effect of Heat Treatment on Cylinder Block Bore Distortion

    Akkaladevi, S. K. | Springer Verlag | 2013
    piston assembly failure. The paper discusses the methods to quantify the distortion levels in the cylinder block caused by the heat treatment ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Heat Treatment Process , Automotive Engineering

    Materials, Heat Treatment and Surface Modifications Applied for Automotive Components

    Funatani, K. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Development of the Heat Treatment Automation System for the Car-Body Mold

    Kim, Byeong-Soo / Cho, Che-Seung / Son, Jae Hwan et al. | SAE Technical Papers | 2013
    The manual mold heat treatment is affected by workers' skills so maintaining consistent quality is limited. To overcome the limitations of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Enhancement in Tribological Properties of Squeeze Casted A356 Alloy Through T6 Heat Treatment Process

    Kalidasan, Reshvanth / Ganapathy, Sakthivel / A, Sathishkumar et al. | SAE Technical Papers | 2021
    The primary goal of this analysis is to investigate the effect of heat treatment processes on the tribological properties of squeeze cast ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    CO2 Emission Reduction: Green Heat Treatment of Engine Components (Cylinder Heads)

    Belte, M. / Dragulin, D. | Springer Verlag | 2013

    The present paper presents practical and theoretical aspects of the solid state heating and heat treatment of

     ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Radiative Heat Transfer , Automotive Engineering

    Advancement and Future of Coat Quenchants for Heat Treatment of Automotive Components

    Fukuhara, K. / Asada, S. / Funatani, K. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Case Study-Strengthening of Axle Shaft by Heat Treatment to Overcome Twist

    Rao, Yathish | SAE Technical Papers | 2014
    axle shaft. In order to improve the metallurgical property of the material, the axle shaft is redesigned & strengthened by suitable heat ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India
    Schlagwörter: Heat treatment

    Development of the Induction Heat Treatment Robot System for the Car-Body Mold using OLP Simulator

    Park, Kee-Jin / Kim, Yong-Sik | SAE Technical Papers | 2014
    Heat treatment for car body's mold is mainly a manual process which is performed by worker. The performance of this process is affected by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Proceedings of the 1st International Automotive Heat Treating Conference : 13 - 15 July 1998, Puerto Vallarta, Mexico

    International Automotive Heat Treating Conference / ASM International | TIBKAT | 1999
    Verlag: ASM International , Materials Park, Ohio
    Schlagwörter: Wärmebehandlung

    Predictive Model and Methodology for Heat Treatment Distortion

    Ludtka, G. M. / Pattok, Tracy / Elliott, W. H. | SAE Technical Papers | 1998
    predict ferrous alloy component response (distortion, residual stress, and microstructure) to industrial heat treatment processes for automotive ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Application of air-hardening steels for highly stressed structural parts with simplified heat treatment

    Flaxa, Volker / Guettler, Jürgen / Rieth, Marcus et al. | Tema Archiv | 2014
    intermediate annealing. With a subsequent heat treatment, tensile strength levels higher than 800 MPa can be achieved. In this case, the components are ...
    Schlagwörter: Anlassen (Wärmebehandlung)

    The Thermal Effects of Airflow, Velocity, Direction, and Distribution on the Heat Treatment of Automotive Components

    Howard, R. D. / Bogh, N. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    New Carburising Techniques Using Fluidised Bed Furnace for In Line Heat Treatment in the Automotive Industry

    Reynoldson, R. / Killian, A. | British Library Conference Proceedings | 1997
    Schlagwörter: automotive engineering

    Heat Treatment Cycle Time Reduction of Cylinder Head by Microalloying Aluminium Alloy

    Jayamathy, M. / Vasanth, R. | SAE Technical Papers | 2006
    proper heat-treatment show substantial improvement in the mechanical properties. Further enhancement of their mechanical properties can be ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Effect of Normalizing Heat Treatment on Material and Mechanical Properties of High Strength Steel Tube for Lift axle of Commercial Vehicles

    More, Hemant / Chauhan, Shiv / Ponkshe, Shripadraj | SAE Technical Papers | 2022
    scatter in terms of durability performance. This requires further heat treatment of 20MnV6 to be deployed for reducing the scatter in the material ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Power Inductor[TM] Technology for Automotive Heat Treating

    Ruffini, R. S. / Ruffini, R. T. / Nemkov, V. S. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Understanding the Heat Treatment, Microstructure and Performance of High-Strength Hardened Steels

    Krauss, G. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    2001-01-3376 The Influence of a Local Heat Treatment on the Drawing Properties of an Aluminium Alloy

    Beckmann, M. / Vollertsen, F. / Society of Automotive Engineers et al. | British Library Conference Proceedings | 2001
    Verlag: Society of Automotive Engineers

    THE ROLE OF HEAT TREATMENT ON WEAR BEHAVIOR OF POWDER METALLURGY LOW ALLOY STEELS

    Khorsand, H. / Habibi, M. / Ashtari, M. et al. | British Library Conference Proceedings | 2002
    Schlagwörter: automotive applications , automotive components

    Modern Applications for Salt Bath Heat Treating of Automotive Components

    Dubal, G. P. / Ives, M. T. / Meszaros, A. G. et al. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    A Non-Distorting Heat Treatment Which Provides Both Wear and Corrosion Resistance

    Ferguson, Howard A. | SAE Technical Papers | 1989
    by the automotive industry.A typical specification might call for .003 to .010 inch case depth consisting of clear martensite and a surface ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Heat Treating SAE 5160 Automotive Leaf Springs in a Polymer Quenchant

    Auchter, R. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

      Heat treating SAE 5160 automotive leaf springs in a polymer quenchant

      Auchter, R. | Tema Archiv | 1998
      Oil has been traditionally used for quenching SAE 5160 automotive leaf springs. Advancements in quenching technology, primarily polymer ...
      Verlag: ASM International , Materials Park

    New Environmental-Friendly Developments and Applications of the Pulsed Plasma Heat Treatment Technology in the Field of Engine, Transmission and Power Train Engineering

    Gebeshuber, Andreas / Noebauer, Robert / Mueller, Thomas et al. | SAE Technical Papers | 2010
    hard machining can be omitted. Furthermore, pulsed plasma nitriding has considerable environmental advantages compared to other heat treatment ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Automotive Crankshaft Development in Austempered Ductile Iron Casting

    Kumbhar, Dipak / Gopal, Manish / Yerra, Umamaheswara et al. | SAE Technical Papers | 2023
    , it forces to use costly forgings such as micro alloyed forging steel and Martensitic (after heat treatment) forging steel. To reduce the cost ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Optimization of Mechanical Properties of Advanced Aluminum Casting Alloys by Heat Treatment and Definition of a 'Ductility Value' for Safe Life Aluminum Casting Parts in the Automotive Industry

    Tensi, H. M. / Seibold, P. / Hoegerl, L. J. et al. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Surface treatment selections for automotive applications

    Vetter, Joerg / Barbezat, G. / Crummenauer, J. et al. | Tema Archiv | 2005
    PVD, PECVD, thermochemical heat treatment and thermal spraying. These new treatments are becoming more and more common in powertrain and ...

    Advanced Design of Induction Processes and Work Coils for Heat Treating and Assembly in Automotive Industry

    Goldstein, Robert C. / Ruffini, Robert S. / Ruffini, Robert T. et al. | SAE Technical Papers | 1999
    Induction is widely used for heat treating, bonding, brazing and other operations in the automotive industry. Modern high frequency power ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Material Solution to Automotive Segment: SAIL's Effort

    Bhakat, A K / Deva, Anjana / Jha, B K et al. | SAE Technical Papers | 2014
    . This conflict is resolved with solutions such as special alloying elements. Customized heat treatment during stamping is another option for a ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India
    Schlagwörter: Heat treatment

    Lightweight Design and Additive Manufacturing of a Fatigue-Critical Automotive Component

    Riva, Enrica / uriati, Federico / Nicoletto, Gianni | SAE Technical Papers | 2022
    fabrication in an industrial-grade L-PBF system using AlSi10Mg alloy powder followed by post fabrication heat treatment iv) production and fatigue ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Evaluation of Microstructure and Mechanical Properties of Additively- Manufactured Aluminium Alloy Automotive Component

    Panigrahi, Ajit / PATTANAYAK, Deepak K. / Kaushik, Harish C. et al. | SAE Technical Papers | 2023
    the popular additive manufacturing technologies. The effect of heat treatment on microstructure and mechanical properties has also been ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Heat-Resistant Ferritic Stainless Steel with High Formability for Automotive Exhaust Gas Systems

    Miyazaki, Atsushi / Hirasawa, Junichiro / Gunji, Makio et al. | SAE Technical Papers | 2002
    Improved formability and higher heat-resistance are increasingly demanded to materials used for hot end parts of automotive exhaust gas ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Light weight in the automotive industry - a challenge for hot tool steel industry

    Schruff, I. / Greeb, T. | Tema Archiv | 2011
    supplier of hot-work tool steels but also operates a modern vacuum heat treatment shop, the company set up one of the largest vacuum hardening ...

    Hemming of aluminum automotive sheet

    Mattei, L. / Daniel, D. / Guiglionda, G. et al. | Tema Archiv | 2008
    The need for weight reduction in the automotive industry has led to the development of aluminum alloys for body panels on a number of mass ...
    Schlagwörter: Wärmebehandlung (Materialbearbeitung)

    Testing Method for Working Zone of Heat Treating Furnaces

    Zhang, W. / Fan, G. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Benefits of Producing the Automotive Parts by Cold Plastic Deformation with Posterior Heat of Thermochemical Treatment

    Kaftanov, S. V. / Dyachenko, S. S. / Zolot'ko, V. A. et al. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated

    SAE Technical Papers | 2022
    -Year Review and update of the specification. The revision updates the Title and document to better identify heat treatment, updates composition ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Automotive Applications of SULFONIT and NITROVAC Processes

    Kula, P. / Has, Z. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B (Rene 41) Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable

    SAE Technical Papers | 2023
    This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate. AMS5545H is the result of a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Trends in automotive steel development

    Bleck, Wolfgang | Tema Archiv | 2012
    automotive industry in many different fields, e.g. light-weight design, easy manufacturing, cost performance. This paper presents examples of ...
    Schlagwörter: Wärmebehandlung

    High temperature agent gasification of microwave pyrolysed chars from automotive shredder residue

    Donaj, Pawel / Blasiak, Wlodzimierz / Yang, Weihong | Tema Archiv | 2010
    Presently, there is a growing need for handling Automobile Shredder Residues - ASR or 'car fluff'. One of the most promising methods of ...
    Schlagwörter: Automobil

    High Performance Planetary Gears for Heavy Duty Automotive Transmissions

    Fordén, Linnéa / Bergström, Magnus / Bengtsson, Sven et al. | SAE Technical Papers | 2005
    Planetary gears in heavy truck gearboxes are normally manufactured by forging a blank, turning, hobbing, shaving and heat-treatment ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable

    SAE Technical Papers | 2022
    of the specification. The revision includes an update to the Title, Scope and Response to Heat Treatment (1.1, 3.3.4) to clarify the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat resistant alloys , Heat treatment

    Material aspects in automotive catalytic converters

    International Congress Material Aspects in Automotive Catalytic Converters / Deutsche Gesellschaft für Materialkunde | TIBKAT | 2002
    Schlagwörter: Wärmebehandlung

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated

    SAE Technical Papers | 2022
    This specification covers a corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable

    SAE Technical Papers | 2022
    of the specification. The revision updates the title, scope, and response to heat treatment (1.1, 3.3.3) to clarify the purchased material ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat resistant alloys , Heat treatment

    Intensive Quenching Practices for Automotive Parts Production - An Overview

    Totten, G. E. / Sun, Y. H. / Kobasko, N. I. et al. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Innovative Induction Heat Treating Technologies: Process/Design Features, Control, Quality Assurance and Monitoring

    Popkey, D. L. / Albert, W. B. / Cook, R. L. et al. | British Library Conference Proceedings | 1999
    Verlag: ASM International , Materials Park, OH
    Schlagwörter: automotive heat treating , heat treating

    Characterization of Cold Rolled TRIP Steels for Structural Crash-Relevant Applications in the Automotive Industry

    Koruk, A. Ihsan / Cretteur, L. / Tosal-Martínez, L. et al. | SAE Technical Papers | 2002
    applications such as structural and crash-relevant parts in the automotive industry. It is evident that for that purpose, not only the formability but ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment