161–180 von 401 Ergebnissen
|

    Development of the Induction Heat Treatment Robot System for the Car-Body Mold using OLP Simulator

    Park, Kee-Jin / Kim, Yong-Sik | SAE Technical Papers | 2014
    Heat treatment for car body's mold is mainly a manual process which is performed by worker. The performance of this process is affected by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Material Solution to Automotive Segment: SAIL's Effort

    Bhakat, A K / Deva, Anjana / Jha, B K et al. | SAE Technical Papers | 2014
    . This conflict is resolved with solutions such as special alloying elements. Customized heat treatment during stamping is another option for a ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India
    Schlagwörter: Heat treatment

    Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated

    SAE Technical Papers | 2014
    from an update of this specification that revises the title, restricts material to the sizes of the mechanical property tables (1.1), requires ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated

    SAE Technical Papers | 2014
    This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of investment castings. AMS4471A revises the Title ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod)

    SAE Technical Papers | 2014
    . AMS6427M results from a Five Year Review and update of this specification that corrects the composition in the title and revises decarburization ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel Bars, Forgings, and Tubing 0.65Cr - 0.70Ni - 0.25Mo (0.38 – 0.43C) (8740 Modified)

    SAE Technical Papers | 2014
    . AMS6324J results from a Five Year Review and update of this specification that revises the title, macrostructure, decarburization and reporting ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod)

    SAE Technical Papers | 2014
    . AMS6428K results from a Five Year Review and update of this specification that revises the title, cutting restrictions, macrostructure ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    LOCKRING - FLUID CONNECTION BOSS INSERT, INTERNAL STRAIGHT THREAD

    SAE Technical Papers | 2014
    . AMS5732, AMS5734, OR AMS 5737. 2 HEAT TREATMENT: IF THE RAW MATERIAL IS PROCURED IN THE SOLUTION TREATED CONDITION, AGE PER AMS5732, AMS5737 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    State-of-the-Art 3D simulation Tool as a Strategic Investment

    Fourment, Christiane / Cardinaux, David / Barlier, Julien et al. | SAE Technical Papers | 2014
    but the entire process chain, including the heat treatment processes that are carried out to improve the mechanical properties of the final ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India
    Schlagwörter: Heat treatment

    Advanced steel solution for tubular stabilizers

    Bistron, Marcus / Puchert, Andreas / Säuberlich, Thomas et al. | Tema Archiv | 2014
    usage in highly stressed automotive components like hollow stabilizers. A weight reduction of some 30% can be achieved compared to solid ...
    Schlagwörter: Wärmebehandlung

    Effect of Heat Treatment on Cylinder Block Bore Distortion

    Akkaladevi, S. K. | Springer Verlag | 2013
    piston assembly failure. The paper discusses the methods to quantify the distortion levels in the cylinder block caused by the heat treatment ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Heat Treatment Process , Automotive Engineering

    Development of the Heat Treatment Automation System for the Car-Body Mold

    Kim, Byeong-Soo / Cho, Che-Seung / Son, Jae Hwan et al. | SAE Technical Papers | 2013
    The manual mold heat treatment is affected by workers' skills so maintaining consistent quality is limited. To overcome the limitations of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    CO2 Emission Reduction: Green Heat Treatment of Engine Components (Cylinder Heads)

    Belte, M. / Dragulin, D. | Springer Verlag | 2013

    The present paper presents practical and theoretical aspects of the solid state heating and heat treatment of

     ...
    Verlag: Springer International Publishing , Cham
    Schlagwörter: Radiative Heat Transfer , Automotive Engineering

    Influence of the Washcoat Structure in the Performance of Automotive Three Way Catalysts

    Santos, Helder / Pires, João / Costa, Mário | SAE Technical Papers | 2013
    that has undergone a specific thermal treatment. This paper investigates the influence of the washcoat structure in the performance of ...
    Verlag: Society of Automotive Engineers , SAE International

    A Method for Reliability Improvement of Torsion Spring for Exhaust Valve

    Sung, Baek Ju | SAE Technical Papers | 2013
    proposed two methods for improvement of torque and reliability characteristics of torsion spring. One is improvement of heat treatment condition ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    FITTING ASSEMBLY, ADAPTER, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

    SAE Technical Papers | 2013
    / MATERIALS: CODE LETTER "T" RING - AMS 4965 TITANIUM ALLOY, 6.0AL 4.0V SOLUTION HEAT TREATED AND AGED OR AMS 4928 TITANIUM ALLOY 6.0 AL 4.0V ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI

    SAE Technical Papers | 2013
    ADD AS6449 AS A NEW LUBRICANT TYPE. /1/ MATERIALS: CODE LETTER “T” RINGS - AMS4965 TITANIUM ALLOY, 6.0AL 4.0V SOLUTION HEAT TREATED ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Nort America zinc-based sheet steel coatings technology and production: status und opportunities

    Goodwin, Frank E. / Silva, Eduardo A. | Tema Archiv | 2013
    Continuing capability developments in North American hot-dip galvanizing lines serving automotive, construction and appliance industry ...
    Schlagwörter: Wärmebehandlung (Materialbearbeitung)

    Trends in automotive steel development

    Bleck, Wolfgang | Tema Archiv | 2012
    automotive industry in many different fields, e.g. light-weight design, easy manufacturing, cost performance. This paper presents examples of ...
    Schlagwörter: Wärmebehandlung

    Ecological lifecycle assessment of an electric drive for the automotive industry

    Klocke, F. / Lung, D. / Schlosser, R. et al. | IEEE | 2012
    stator-grooves), modifying material properties (e.g. heat treatment of shaft). Physical measurement techniques will later be applied in order to ...

      Ecological lifecycle assessment of an electric drive for the automotive industry

      Klocke, F. / Lung, D. / Schlosser, R. et al. | Tema Archiv | 2012
      properties (e.g. heat treatment of shaft). Physical measurement techniques will later be applied in order to determine the absorbed flows of ...