1–20 von 2,383 Ergebnissen
|

    Research on Heat Dissipation Performance of Automobile Motor Based on Heat Pipe Optimization Design

    Ou, Chunguo / Yang, Chunyun / Tan, Gangfeng et al. | SAE Technical Papers | 2022
    optimization design based on a drive motor heat dissipation scheme is proposed, and the overall stability of the motor working under high temperature ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical and Experimental Investigation on Heat Exchange Performance for Heat Dissipation Module for Construction Vehicles

    Liu, Jiaxin / He, Shumo / Qin, Sicheng et al. | SAE Technical Papers | 2017
    dissipation module under varied working conditions. The module in the XD132 consists of a cooling fan and three radiators. At first, the numerical ...
    Verlag: Society of Automotive Engineers , SAE International

    Energy Efficiency Impact of Localized Cooling/Heating for Electric Vehicle

    Ghosh, Debashis / Wolfe, Edward / Bozeman, Jeffrey et al. | SAE Technical Papers | 2015
    cooling/heating system. Components in the localized system use thermoelectric (TE) devices to target the occupant's chest, face, lap and foot ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Micro-Cooling/Heating Strategy for Energy Efficient HVAC System

    Khalighi, Bahram / Chen, Kuo-huey / Kaushik, Shailendra et al. | SAE Technical Papers | 2011
    improvements in an HVAC system through micro-cooling/heating strategies and (b) validation of an analytical approach developed in GM that would support ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Stator Surface Area on Braking Torque and Wall Heat Dissipation of Magnetorheological Fluid Retarder

    Tan, Gangfeng / Frimpong, Justice / Zhou, Mi et al. | SAE Technical Papers | 2020
    heat dissipation. In this study, the relationship between the braking torque of the MRF retarder and the stator surface area of the retarder ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimization of Cooling Air Flow for Improved Heat Dissipation through Radiator

    Aher, Amit / Palve, Chandrakant / Thakur, Paurnima et al. | SAE Technical Papers | 2024
    Engine cooling system, which will ensure optimum operating range of internal combustion engine through precise control on coolant flow rate by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Numerical and Experimental Research on Flow Resistance of Cool Medium from Heat Dissipation System for Construction Vehicles

    Wang, Baozhong / Long, Haiyang / Liu, Jiaxin et al. | SAE Technical Papers | 2018
    research target to seek out the effect of air flow resistance on the performance of its heat dissipation system. For a start, a simplified 3D model ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Experimental Investigation on the Influence of Pressure Wheel Design on Heat Dissipation for a Laser Robotic End of Arm Tooling

    Hamieh, Abdallah / Jawad, Badih / Liu, Liping et al. | SAE Technical Papers | 2018
    The initiative of this paper is focused on improving the heat dissipation from the pressure wheel of a laser welding assembly in order to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Analysis of Passive Low Power Phase Change Heat Dissipation Method for Electric Vehicle Motor

    Tan, Gangfeng / Quan, Jiakang / Kuang, Jianjie et al. | SAE Technical Papers | 2019
    large and the reliability is poor. In order to solve this problem, this paper proposes a heat dissipation method to improve the reliability and ...
    Verlag: Society of Automotive Engineers , SAE International

    A Thermal Energy Operated Heating/Cooling System for Buses

    Teng, Ho | SAE Technical Papers | 2010
    The passenger cabin heating and cooling has a considerable impact on the fuel economy for buses, especially during the waiting period. This ...
    Verlag: Society of Automotive Engineers , SAE International

    Testing a 50kW ORC at Different Heating and Cooling Source Conditions to Map the Performance Characteristics

    Lin, Chuen-Sen / Johnson, Thomas / Avadhanula, Vamshi K. | SAE Technical Papers | 2013
    -liquid heat exchanger. In the present work performance test was conducted on a 50 kW ORC power unit under different heating and cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Temperature Control of Water with Heating, Cooling and Mixing in a Process with Recycle Loop

    Wu, Hai / Li, Meng-Feng / Chen, Wen et al. | SAE Technical Papers | 2014
    is controlled by a heating, cooling and mixing process with individual valves regulating the flow-rate of saturated steam, chilled water and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Simulation and Optimization on Oscillating Cooling Characteristics in High-Enhanced Piston Oil Cooling Gallery

    Dong, Fei / Ni, Jie / Zong, Mingjing et al. | SAE Technical Papers | 2017
    Oscillating cooling characteristics in piston oil cooling gallery of internal combustion engines were simulated by adopting Coupled Level ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling

    Heating, Ventilating, and Cooling of Passenger Cars

    Chase, Herbert | SAE Technical Papers | 1940
    comparative study of existing heating, ventilating, and cooling systems. Some 1939 and many more 1940 car models, he believes, yield greatly improved ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Windows and windshields

    Predicting Thermal Distortion Issue during Heating and Cooling of Car Bodies Inside a Paint Shop Oven Using CAE/FEA

    Lakic, Alex / Buckley, Michael / Silvester, Sajeev | SAE Technical Papers | 2015
    Dimensional distortion, cosmetic distortion issues can arise during heating and cooling in the paint shop processing of car bodies. A car ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Tools and equipment , Coatings, colorants, and finishes

    Improving Performance of Heating, Ventilation, and Air-Conditioning System of Electric Vehicle Using Evaporative Cooling: A Model-Based Analysis

    Shandilya, Anant / Melby, Grayson / Ranjan, Sant et al. | SAE Technical Papers | 2021
    , a cooling methodology based on direct evaporative cooling (DEC) is introduced, and the benefits of such a technique are illustrated by the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Study on Driving Forms and Control of Engine Cooling Fan

    Shangguan, Wenbin / Wang, Xihui / Wang, Xinling et al. | SAE Technical Papers | 2023
    The influence of engine cooling fan on the working state of engine cooling system under different driving forms and control strategy is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Simulation and modeling

    Improving Engine Pre-Start And After-Start Heating by Using the Combined Heating System

    Gritsuk, Igor / Verbovskiy, Valeriy / Mateichyk, Vasyl et al. | SAE Technical Papers | 2016
    to accumulate the thermal energy. The results of experimental studies of the combined heating system are shown. A system and methods for pre ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    On-System Engine Cooling Fan Measurement as a Tool for Optimizing Cooling System Airflow Performance and Noise

    Sortor, Michael | SAE Technical Papers | 2011
    specification of the cooling fan, the heat exchangers, and the associated electrical loads. The simplest method of expressing the engine cooling fan ...
    Verlag: Society of Automotive Engineers , SAE International

    Aerodynamic Drag and Engine Cooling Effects on Class 8 Trucks in Platooning Configurations

    Gargoloff, Joaquin Ivan / Ellis, Matthew / Sengupta, Raja | SAE Technical Papers | 2015
    reduction, this paper also highlights the adverse impact of platooning on the engine cooling performance in trailing vehicles, due to the reduction ...
    Verlag: Society of Automotive Engineers , SAE International