1–20 von 40 Ergebnissen
|

    3D Scene Reconstruction from Multiple Spherical Stereo Pairs

    Kim, H. / Hilton, A. | British Library Online Contents | 2013

    A comparative study on the power characteristics and control strategies for plug-in hybrid electric vehicles

    Ma, C. / Kang, J. / Choi, W. et al. | Springer Verlag | 2012
    Abstract A comparative study was performed on two types of plug-in hybrid electric vehicles (PHEVs): the GM ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      A comparative study on the power characteristics and control strategies for plug-in hybrid electric vehicles

      Ma, C. / Kang, J. / Choi, W. et al. | Online Contents | 2012
      Abstract A comparative study was performed on two types of plug-in hybrid electric vehicles (PHEVs): the GM Volt and the Toyota Prius Plug ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      A comparative study on the power characteristics and control strategies for plug-in hybrid electric vehicles

      Ma, C. / Kang, J. / Choi, W. et al. | British Library Online Contents | 2012

    Active yaw control for handling performance improvement by using traction force

    Kim, H. / Lee, S. / Hedrick, J. K. | Springer Verlag | 2015
    Abstract This paper presents the vehicle handling performance improvement by means of transfer case and torque ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Active yaw control for handling performance improvement by using traction force

      Kim, H. / Lee, S. / Hedrick, J. K. | Online Contents | 2015
      Abstract This paper presents the vehicle handling performance improvement by means of transfer case and torque vectoring system. The focus ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      Active yaw control for handling performance improvement by using traction force

      Kim, H. / Lee, S. / Hedrick, J. K. | British Library Online Contents | 2015

    Appearance-Cloning: Photo-Consistent Scene Recovery from Multi-View Images

    Kim, H. / Kweon, I. S. | British Library Online Contents | 2006

    A study on the obstacle-induced variation of the gas explosion characteristics

    Oh, K.H. / Kim, H. / Kim, J.B. et al. | Tema Archiv | 2001
    A study on the variation of the gas explosion characteristics caused by the built-in obstacles was conducted in enclosed/vented gas ...

    Combustion stability analysis during engine stop and restart in a hybrid powertrain

    Ohn, H. / Min, K. | Springer Verlag | 2009
    investigate the characteristics of combustion stability in a mild gasoline hybrid powertrain. A Fast Response Flame Ionization Detector (FFID ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Combustion stability analysis during engine stop and restart in a hybrid powertrain

      Ohn, H. / Min, K. | British Library Online Contents | 2009

      Combustion stability analysis during engine stop and restart in a hybrid powertrain

      Ohn, H. / Min, K. | Online Contents | 2009
      Abstract A cycle-resolved analysis system was designed with the specified measurement instruments to investigate the characteristics of ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Cooperative control of the motor and the electric booster brake to improve the stability of an in-wheel electric vehicle

    Ko, S. / Song, C. / Kim, H. | Springer Verlag | 2016
    improve the stability of an in-wheel electric vehicle. The in-wheel system was modeled by dividing it into motor and mechanical parts, and the ...
    Verlag: The Korean Society of Automotive Engineers , Seoul

      Cooperative control of the motor and the electric booster brake to improve the stability of an in-wheel electric vehicle

      Ko, S. / Song, C. / Kim, H. | Online Contents | 2016
      Abstract A cooperative control algorithm for an in-wheel motor and an electric booster brake is proposed to improve the stability of an in ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    CVT ratio control with consideration of CVT system loss

    Ryu, W. / Kim, H. | Springer Verlag | 2008
    the CVT system loss, which occupies most of the drivetrain loss, depends on the engine speed, input torque, primary and secondary actuator ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      CVT ratio control with consideration of CVT system loss

      Ryu, W. / Kim, H. | Online Contents | 2008
      occupies most of the drivetrain loss, depends on the engine speed, input torque, primary and secondary actuator pressure, a modified CVT ratio map ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      CVT ratio control with consideration of CVT system loss

      Ryu, W. / Kim, H. | British Library Online Contents | 2008

    Design of a Multi-Chamber Silencer for Turbocharger Noise

    Selamet, A. / Kim, H. / Lee, I. J. et al. | SAE Technical Papers | 2009
    A multi-chamber silencer is designed by a computational approach to suppress the turbocharger whoosh noise downstream of a compressor in an ...
    Verlag: Society of Automotive Engineers , SAE International

    Design of power split transmission: Design of dual mode power split transmission

    Kim, J. / Kang, J. / Kim, Y. et al. | Springer Verlag | 2010
    mechanical unit. In this study, the equation for the MP was derived for the gear ratios of a general 4-node lever model. The MP characteristics for ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Design of power split transmission: Design of dual mode power split transmission

      Kim, J. / Kang, J. / Kim, Y. et al. | Online Contents | 2010
      , the equation for the MP was derived for the gear ratios of a general 4-node lever model. The MP characteristics for the transmission ratio (TR ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

      Design of power split transmission: Design of dual mode power split transmission

      Kim, J. / Kang, J. / Kim, Y. et al. | British Library Online Contents | 2010

    Design of the electronic brake pressure modulator using a direct adaptive fuzzy controller in commercial vehicles for the safety of braking in fail

    Kim, H. | Tema Archiv | 2002
    In the brake systems, it is important to reduce the rear brake pressure in order to secure safety of the vehicle in braking. In this paper ...

    Development of a control strategy based on the transmission efficiency with mechanical loss for a dual mode power split-type hybrid electric vehicle

    Kang, J. / Choi, W. / Kim, H. | Springer Verlag | 2012
    developed based on the powertrain efficiency. To evaluate the transmission characteristics of the dual mode power split transmission (PST), a ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Development of a control strategy based on the transmission efficiency with mechanical loss for a dual mode power split-type hybrid electric vehicle

      Kang, J. / Choi, W. / Kim, H. | Online Contents | 2012
      powertrain efficiency. To evaluate the transmission characteristics of the dual mode power split transmission (PST), a mechanical loss model of the ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Development of an on-line model to predict the in-cylinder residual gas fraction by using the measured intake/exhaust and cylinder pressures

    Choi, S. / Ki, M. / Min, K. | Springer Verlag | 2010
    Abstract The in-cylinder RGF (residual gas fraction) of internal combustion engines for new combustion ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg
    Schlagwörter: MOC (method of characteristics)

      Development of an on-line model to predict the in-cylinder residual gas fraction by using the measured intake/exhaust and cylinder pressures

      Choi, S. / Ki, M. / Min, K. | Online Contents | 2010
      Abstract The in-cylinder RGF (residual gas fraction) of internal combustion engines for new combustion concepts, such as CAI (controlled ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Development of engine control using the in-cylinder pressure signal in a high speed direct injection diesel engine

    Yu, S. / Choi, H. / Cho, S. et al. | Springer Verlag | 2013
    manufacturers. Many engine subsystems and control technologies have been introduced to meet the demands of these regulations. For diesel engines ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Development of engine control using the in-cylinder pressure signal in a high speed direct injection diesel engine

      Yu, S. / Choi, H. / Cho, S. et al. | Online Contents | 2013
      and control technologies have been introduced to meet the demands of these regulations. For diesel engines, combustion control is one of the ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Development of estimation algorithms for vehicle’s mass and road grade

    Kim, I. / Kim, H. / Bang, J. et al. | Springer Verlag | 2013
    Abstract In controlling the longitudinal motion of electrified vehicles such as hybrid vehicles and PHEV (Plug ...

      Development of estimation algorithms for vehicle’s mass and road grade

      Kim, I. / Kim, H. / Bang, J. et al. | Online Contents | 2013
      Abstract In controlling the longitudinal motion of electrified vehicles such as hybrid vehicles and PHEV (Plug-in Hybrid Electric Vehicles ...

      Development of estimation algorithms for vehicle’s mass and road grade

      Kim, I. / Kim, H. / Bang, J. et al. | British Library Online Contents | 2013

    Development of evolutionary cone type LSD for SUV/RV utilizing the axiomatic approach and the ultrasonic nano crystal surface modification technology

    Pyoun, Y. S. / Kim, H. T. / Lee, Y. C. et al. | Springer Verlag | 2008
    Abstract Surface topology, cone angle and the forces acting on the cone of the clutch type limited slip ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Development of evolutionary cone type LSD for SUV/RV utilizing the axiomatic approach and the ultrasonic nano crystal surface modification technology

      Pyoun, Y. S. / Kim, H. T. / Lee, Y. C. et al. | Online Contents | 2008
      Abstract Surface topology, cone angle and the forces acting on the cone of the clutch type limited slip differential (LSD) are major design ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Effect of operating parameters on diesel/propane dual fuel premixed compression ignition in a diesel engine

    Kang, J. / Chu, S. / Lee, J. et al. | British Library Online Contents | 2018

    Effect of UWS injection at low exhaust gas temperature on NOx removal efficiency of diesel engine

    Han, J. / Lee, J. / Oh, Y. et al. | British Library Online Contents | 2017

    Experimental study on the characteristics of nano-particle emissions from a heavy-duty diesel engine using a urea-SCR system

    Lee, S. / Cho, Y. / Song, M. et al. | Springer Verlag | 2012
    health problems including diseases such as lung cancer. Because diesel nano-particle issues are of global concern, regulations on particulate ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Experimental study on the characteristics of nano-particle emissions from a heavy-duty diesel engine using a urea-SCR system

      Lee, S. / Cho, Y. / Song, M. et al. | Online Contents | 2012
      diseases such as lung cancer. Because diesel nano-particle issues are of global concern, regulations on particulate matter emissions specify that ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul

    Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

    Baek, S. Y. / Bae, D. H. / Kim, H. | Springer Verlag | 2008
    numerically predicted residual stresses of the gas welds were then compared to experimental results measured using a hole drilling method. In order to ...
    Verlag: The Korean Society of Automotive Engineers , Heidelberg

      Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

      Baek, S. Y. / Bae, D. H. / Kim, H. | British Library Online Contents | 2008

      Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

      Baek, S. Y. / Bae, D. H. / Kim, H. | Online Contents | 2008
      stresses of the gas welds were then compared to experimental results measured using a hole drilling method. In order to evaluate the fatigue ...
      Verlag: The Korean Society of Automotive Engineers , KSAE , Sŏul