1–20 von 38 Ergebnissen
|

    Structural assessment of railway axles – A critical review

    Zerbst, U. / Klinger, C. / Klingbeil, D. | Tema Archiv | 2013
    The safety assessment of railway axles is based on a two-stage approach: fatigue strength design and regular inspections which, in terms of ...

    Status review on fatigue performance of fillet welds

    Maddox, Stephen J. | Tema Archiv | 2006
    A recent joint-industry project addressing the fatigue design of weld details in FPSO vessels focused on potential fatigue failure from ...

    Some key effects on the failure assessment of weld repairs in CrMoV pipelines using continuum damage modelling

    Sun, W. / Hyde, T.H. / Becker, A.A. et al. | Tema Archiv | 2005
    , etc., on the failure life of the repaired welds. The potential uses and limitations of the damage analysis for weld repair performance ...

    Reverse engineering gone wrong: a case study

    McEvily, A.J. | Tema Archiv | 2005
    replacement parts. The second manufacturer used a process known as reverse engineering in manufacturing the parts. That is, he attempted to copy in ...
    Schlagwörter: Störfallanalyse

    Prevention of failures of high strength fasteners in use in offshore and subsea applications

    Esaklul, Khlefa A. / Ahmed, Tawfik M. | Tema Archiv | 2009
    some of the challenges that face the oil and gas industry with particular emphasis on prevention of failures due to hydrogen embrittlement (HE ...
    Schlagwörter: Ausfall

    Modelling the sources of cracking of aircraft compressor vanes rings

    Nash, D.H. / Dempster, I.R. | Tema Archiv | 2005
    required in order to assess the effect of the crack, to see if further propagation will result. Such cracks have been found on a compressor vane ...

    Methodology of short fatigue crack detection by the eddy current method in a multi-layered metal aircraft structure

    Bohacova, Marie | Tema Archiv | 2013
    current (EC) method on the complex multi-layered metal aircraft structure to detect cracks and other damage. A range of standard eddy current ...

    Investigation on the damage mechanism and prevention of heavy-haul railway rail

    Wang, W.J. / Guo, H.M. / Du, X. et al. | Tema Archiv | 2013
    cracks initiate from wear surface of damage rail and there are different propagation path on the crack growing process. The intergranular and ...

    Investigating the effect of road roughness on automotive component

    Reza-Kashyzadeh, Kazem / Ostad-Ahmad-Ghorabi, Mohammad Jafar / Arghavan, Alireza | Tema Archiv | 2014
    tire is in motion. Therefore, suspension testing that has a direct impact on passenger safety and comfort is essential and important. Given the ...

    High strain rate behavior of the component materials of an integral armor

    Mahfuz, H. / Gama, B.A. / Raines, R.P. et al. | Tema Archiv | 1997
    momentum trapping device. The strain rate effects on the initial modulus, failure stress and failure strain through-the-thickness of the integral ...
    Verlag: Society for the Advancement of Material and Process Engineering (SAMPE) , Covina
    Schlagwörter: Ausfallanalyse

    Fracture mechanics in fatigue calculations as the assistance in structural design. Case study

    Ermolaeva, Natalia S. / Ward, Thomas / Bateman, William et al. | Tema Archiv | 2013
    A case study originated from a request to perform fatigue calculations on a partial penetration weld in a steel casting on a new heavy lift ...

    Fracture mechanics in aircraft failure analysis: Uses and limitations

    Wanhill, R.J.H. / Molent, L. / Barter, S.A. | Tema Archiv | 2013
    failure fatigue crack growth (FCG) behaviour. LEFM analyses can assist in analysing FCG in full-scale, component and specimen tests, and these ...
    Schlagwörter: Störfallanalyse

    Fracture in a rubber-sprung railway wheel

    Richard, H.A. / Fulland, M. / Sander, M. et al. | Tema Archiv | 2005
    In the year 1998 near Eschede the German ICE-high speed train Wilhelm-Conrad Röntgen got into an accident on its way from Munich to Hamburg ...

    Five helicopter accidents with evidence of material and/or design deficiencies

    Wanhill, R.J.H. / Symonds, N. / Merati, A. et al. | Tema Archiv | 2013
    , when accidents occur the subsequent investigations should include or at least consider forensic engineering, even if only to eliminate possible ...
    Schlagwörter: Störfallanalyse

    Fatigue analysis of railway coupling joint

    Infante, Virginia / Duarte, Pedro / Moura Branco, Carlos | Tema Archiv | 2007
    A new type of railway coupling joint, developed by a leading international railway manufacturer, has shown limited fatigue lives in service ...

    Failure and stiffness analysis of ceramic from a 25-mm diameter diesel particulate filter

    Fox, Ethan E. / Wereszczak, Andrew A. / Lance, Michael J. et al. | Tema Archiv | 2012
    secant elastic modulus of the DPF ceramics at failure initiation stress is approximately 1-2 GPa; this is approximately one order of magnitude ...
    Schlagwörter: Ausfall

    Failure analysis of seat belt buckle inertial release

    Roberts, A. / Partain, M. / Batzer, S. et al. | Tema Archiv | 2007
    Failure not only occurs when components fracture or yield under stress; it is also characterized by components failing to perform a ...
    Schlagwörter: Ausfall

    Failure analysis of landing gears trunnions due to service

    Infante, V. / Reis, L. / De Freitas, M. | Tema Archiv | 2014
    tools were used in order to find out the primary cause of failure, namely, visual examination, chemical analysis and macroscopic, microscopic ...

    Failure analysis of a non-integral pipeline collet connector

    Fassina, P. / Guagliano, M. / Lazzari, L. et al. | Tema Archiv | 2005
    This paper describes the failure analysis carried out on a 12''-non-integral pipeline collet connector, joining a 12''-pipeline with an ...

    Failure analysis of a crude oil pipeline

    Azevedo, Cesar R.F. | Tema Archiv | 2007
    nucleation. The internal surface of the tube and the cracking surfaces presented a deposit layer, which was rich in Fe, O and S. Diffractometry on ...