Synonyme wurden verwendet für: Lasers as for manufacturing tools
Suche ohne Synonyme: title: Lasers as tools for manufacturing

1–20 von 25 Ergebnissen
|

    Experiences using rapid prototyping techniques to manufacture sheet metal forming tools

    Mueller, D.H. / Mueller, H. | Tema Archiv | 2000
    suitable to manufacture sheet metal forming tools on a large basis economically. But for selected applications the use of RPT already brings profit ...
    Schlagwörter: Fertigung

    Laser application in automotive production

    Haepp, H.J. | Tema Archiv | 2000
    are shown for the application of CO2, light/diode-pumped Nd:YAG lasers, the ''dual focus technology'' in aluminium laser welding and for ...
    Schlagwörter: keramisches Werkzeug , CO2-Laser , diodengepumpter Laser , Nd-YAG-Laser

    Deep hole drilling using tools with small diameters - Process analysis and process design

    Zabel, Andreas / Heilmann, Markus | Tema Archiv | 2012
    This paper is focused on the drilling of bore holes with high length-to-diameter ratios and diameters less than 2 mm which are needed, for ...
    Schlagwörter: Tieflochbohren (Fertigung)

    Laser-based imaging for reverse engineering

    Page, D. / Koschan, A. / Sun, Y. et al. | Tema Archiv | 2003
    Recent advances in laser-based range imaging, technologies have led to the exploration of these technologies as reverse engineering (RE ...

    A New Laser Technology for Air Traffic Management

    Salerno, M. / Costantini, G. / Carota, M. et al. | Tema Archiv | 2009
    prediction tools and devices specifically designed for the analysis of the laser systems performances in ATC applications, with the final target of ...
    Schlagwörter: Laser

    Laser-based repair of carbon fiber reinforced plastics

    Fischer, F. / Romoli, L. / Kling, R. | Tema Archiv | 2010
    It has been proved that DPSS (Diode Pumped Solid State) laser emitting in the UV region represents a promising alternative for processing ...

    Beam spring flexible manufacturing production line

    Peck, D.E. | Tema Archiv | 2000
    A need arose to design and build a production line that would make a long, thin, tapered and curved beam spring for a high volume ...
    Schlagwörter: diodengepumpter Laser , Nd-YAG-Laser

    Cutting and machining energetic materials with a femtosecond laser

    Roeske, Frank / Benterou, Jerry / Lee, Ronald et al. | Tema Archiv | 2003
    A femtosecond (fs) laser has been used as a tool for solving many problems involving access, machining, disassembly, inspection and ...
    Schlagwörter: Laser , Fabrikation , Werkzeug

    A review of quality engineering tools and techniques practices in Malaysia's and Indonesia's automotive industries and an agenda for future research

    Putri, N.T. / Yusof, S.M. | Tema Archiv | 2008
    improve existing production processes and its title typically covers such as Statistical Process Control (SPC), Taguchi Methods and Design of ...

    Bifocal hybrid laser welding of aluminium

    Huber, S. / Trautmann, A. / Zäh, M.F. | Tema Archiv | 2007
    Market needs for higher geometric flexibility in combination with shorter production cycles in laser welding represent a challenge for new ...
    Schlagwörter: Neodym-YAG-Laser

    CO2 laser cutting and drilling applications in aerospace fabricating

    Rathinavelu, M. | Tema Archiv | 1991
    Lasers are gaining increasing acceptance as production tools in modern manufacturing environment. This article describes how CO2 lasers are ...

    Advances in laser welding of automotive parts

    Ross, I.E. / Hughes, D.W. / Orihashi, T. | Tema Archiv | 1992
    CO2 industrial lasers have become important tools for the automotive production engineer to utilise to improve the efficiency and ...

    Three-dimensional anthropometric techniques applied to the fabrication of burn masks and the quantification of wound healing

    Whitestone, J.J. / Geisen, G.R. / McQuiston, B.K. | Tema Archiv | 1997
    callipers and tape measures, or with advanced image acquisition systems, such as a laser scanner. Next, numerous statistical analysis tools, such as ...

    Laser technology - making new engineeering solution possible

    Larsson, J.K. | Tema Archiv | 1991
    tools. Here we agree with many of our competitors that laser technology have a potential regarding welding and cutting operations in ...

    Real-time dual-channel ultrasonic system for inspection of aircraft structures

    Regez, Brad / Kirikera, Goutham / Komsky, Igor et al. | Tema Archiv | 2008
    aircraft structures. A-scan, B-scan, and C-scan modalities of ultrasonic imaging are deployed as independent evaluation tools by many researchers ...
    Verlag: Chinese Society for Non-destructive Testing , Shanghai
    Schlagwörter: Herstellung

    Joint strength of Al-Mg-Si alloys for automobiles by advanced welding technologies

    Ema, M. / Sasabe, S. | Tema Archiv | 2004
    tolerance and initial investment for equipment, it has great advantages in its small thermal effect and high welding speed. As for laser/MIG hybrid ...

    Passage simulation of monorail suspension conveyors and transport goods for collision prevention

    Wunderlich, Thomas A. / Schäfer, Thomas / Auer, Stefan | Tema Archiv | 2008
    surrounding area or flexible tools becomes a must. Above all, it is an interruption of production that has to be prevented as this would result in ...

    Measuring the big stuff. Inspection & quality - part 1

    Olexa, R. | Tema Archiv | 2003
    . The system might prove useful for coarse positioning of very large machine tools such as the big skin mills and routers used in the aerospace ...

    Airbags

    Mahish, Sudipta S. / Das, Manoj | Tema Archiv | 2005
    materials: coated nylon can be cut with the traditional mechanical tools, uncoated nylon must be cut with a hot tool, such as laser to prevent ...
    Schlagwörter: Gewebe für aufblasbare Strukturen

    Investigations of automotive defroster and windshield flow

    Becker, S. / Lienhart, H. / Stoots, C. et al. | Tema Archiv | 2001
    design tools such as computational fluid dynamics (CFD). For this purpose a joint experimental and numerical study was undertaken. Before relying ...
    Schlagwörter: Laser-Doppler-Anemometrie