Ductile (Nodular) Iron Castings, Sand 60000 psi (415 MPa) Tensile Strength Ferritize Annealed
Unmanned Systems (UxS) Control Segment (UCS) Architecture: UCS Architecture Model
Rings, Retaining – Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast
DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi (550 MPa) Tensile Strength As Cast
Magnesium Alloy Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated
Powder, Chromium Carbide Plus Nickel-Chromium Alloy 75Cr2C3 + 25 (80Ni - 20Cr Alloy)
Magnesium Alloy, Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated
Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast
Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated
Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged
Aircraft Lightning Environment and Related Test Waveforms
STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT 13Cr Normalized and Tempered
Casting, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed
Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As Cast
Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional